You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Device/LowLevel/MIDI/MIDI.h

103 lines
3.8 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for AudioOutput.c.
*/
#ifndef _AUDIO_OUTPUT_H_
#define _AUDIO_OUTPUT_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <stdbool.h>
#include "Descriptors.h"
#include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
/* Macros: */
/** MIDI command for a note on (activation) event */
#define MIDI_COMMAND_NOTE_ON 0x90
/** MIDI command for a note off (deactivation) event */
#define MIDI_COMMAND_NOTE_OFF 0x80
/** Standard key press velocity value used for all note events, as no pressure sensor is mounted */
#define MIDI_STANDARD_VELOCITY 64
/** Convenience macro. MIDI channels are numbered from 1-10 (natural numbers) however the logical channel
* addresses are zero-indexed. This converts a natural MIDI channel number into the logical channel address.
*
* \param[in] channel MIDI channel number to address
*/
#define MIDI_CHANNEL(channel) ((channel) - 1)
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Type Defines: */
/** Type define for a USB MIDI event packet, used to encapsulate sent and received MIDI messages from a USB MIDI interface. */
typedef struct
{
unsigned char Command : 4; /**< MIDI command being sent or received in the event packet */
unsigned char CableNumber : 4; /**< Virtual cable number of the event being sent or received in the given MIDI interface */
uint8_t Data1; /**< First byte of data in the MIDI event */
uint8_t Data2; /**< Second byte of data in the MIDI event */
uint8_t Data3; /**< Third byte of data in the MIDI event */
} USB_MIDI_EventPacket_t;
/* Function Prototypes: */
void SetupHardware(void);
void MIDI_Task(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
#endif