You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Device/LowLevel/MassStorage/MassStorage.h

153 lines
6.5 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for MassStorage.c.
*/
#ifndef _MASS_STORAGE_H_
#define _MASS_STORAGE_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include "Descriptors.h"
#include "Lib/SCSI.h"
#include "Lib/DataflashManager.h"
#include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Dataflash.h>
/* Macros: */
/** Mass Storage Class specific request to reset the Mass Storage interface, ready for the next command. */
#define REQ_MassStorageReset 0xFF
/** Mass Storage Class specific request to retrieve the total number of Logical Units (drives) in the SCSI device. */
#define REQ_GetMaxLUN 0xFE
/** Maximum length of a SCSI command which can be issued by the device or host in a Mass Storage bulk wrapper. */
#define MAX_SCSI_COMMAND_LENGTH 16
/** Total number of Logical Units (drives) in the device. The total device capacity is shared equally between
* each drive - this can be set to any positive non-zero amount.
*/
#define TOTAL_LUNS 1
/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
#define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
/** Magic signature for a Command Block Wrapper used in the Mass Storage Bulk-Only transport protocol. */
#define CBW_SIGNATURE 0x43425355UL
/** Magic signature for a Command Status Wrapper used in the Mass Storage Bulk-Only transport protocol. */
#define CSW_SIGNATURE 0x53425355UL
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from host-to-device. */
#define COMMAND_DIRECTION_DATA_OUT (0 << 7)
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */
#define COMMAND_DIRECTION_DATA_IN (1 << 7)
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
/* Type defines: */
/** Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
typedef struct
{
uint32_t Signature; /**< Command block signature, must be CBW_SIGNATURE to indicate a valid Command Block */
uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper */
uint32_t DataTransferLength; /** Length of the optional data portion of the issued command, in bytes */
uint8_t Flags; /**< Command block flags, indicating command data direction */
uint8_t LUN; /**< Logical Unit number this command is issued to */
uint8_t SCSICommandLength; /**< Length of the issued SCSI command within the SCSI command data array */
uint8_t SCSICommandData[MAX_SCSI_COMMAND_LENGTH]; /**< Issued SCSI command in the Command Block */
} CommandBlockWrapper_t;
/** Type define for a Command Status Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
typedef struct
{
uint32_t Signature; /**< Status block signature, must be CSW_SIGNATURE to indicate a valid Command Status */
uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper */
uint32_t DataTransferResidue; /**< Number of bytes of data not processed in the SCSI command */
uint8_t Status; /**< Status code of the issued command - a value from the MassStorage_CommandStatusCodes_t enum */
} CommandStatusWrapper_t;
/* Enums: */
/** Enum for the possible command status wrapper return status codes. */
enum MassStorage_CommandStatusCodes_t
{
Command_Pass = 0, /**< Command completed with no error */
Command_Fail = 1, /**< Command failed to complete - host may check the exact error via a SCSI REQUEST SENSE command */
Phase_Error = 2 /**< Command failed due to being invalid in the current phase */
};
/* Global Variables: */
extern CommandBlockWrapper_t CommandBlock;
extern CommandStatusWrapper_t CommandStatus;
extern volatile bool IsMassStoreReset;
/* Function Prototypes: */
void SetupHardware(void);
void MassStorage_Task(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_UnhandledControlRequest(void);
#if defined(INCLUDE_FROM_MASSSTORAGE_C)
static bool ReadInCommandBlock(void);
static void ReturnCommandStatus(void);
#endif
uint8_t StreamCallback_AbortOnMassStoreReset(void);
#endif