You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
479 lines
14 KiB
479 lines
14 KiB
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <avr/pgmspace.h>
|
|
#include <avr/eeprom.h>
|
|
#include "keycode.h"
|
|
#include "serial.h"
|
|
#include "host.h"
|
|
#include "action.h"
|
|
#include "action_util.h"
|
|
#include "lufa.h"
|
|
#include "rn42_task.h"
|
|
#include "print.h"
|
|
#include "debug.h"
|
|
#include "timer.h"
|
|
#include "wait.h"
|
|
#include "command.h"
|
|
#include "battery.h"
|
|
|
|
static bool config_mode = false;
|
|
static bool force_usb = false;
|
|
|
|
static void status_led(bool on)
|
|
{
|
|
if (on) {
|
|
DDRE |= (1<<6);
|
|
PORTE &= ~(1<<6);
|
|
} else {
|
|
DDRE |= (1<<6);
|
|
PORTE |= (1<<6);
|
|
}
|
|
}
|
|
|
|
void rn42_task_init(void)
|
|
{
|
|
battery_init();
|
|
}
|
|
|
|
void rn42_task(void)
|
|
{
|
|
int16_t c;
|
|
// Raw mode: interpret output report of LED state
|
|
while ((c = rn42_getc()) != -1) {
|
|
// LED Out report: 0xFE, 0x02, 0x01, <leds>
|
|
// To get the report over UART set bit3 with SH, command.
|
|
static enum {LED_INIT, LED_FE, LED_02, LED_01} state = LED_INIT;
|
|
switch (state) {
|
|
case LED_INIT:
|
|
if (c == 0xFE) state = LED_FE;
|
|
else {
|
|
if (0x0 <= c && c <= 0x7f) xprintf("%c", c);
|
|
else xprintf(" %02X", c);
|
|
}
|
|
break;
|
|
case LED_FE:
|
|
if (c == 0x02) state = LED_02;
|
|
else state = LED_INIT;
|
|
break;
|
|
case LED_02:
|
|
if (c == 0x01) state = LED_01;
|
|
else state = LED_INIT;
|
|
break;
|
|
case LED_01:
|
|
dprintf("LED status: %02X\n", c);
|
|
rn42_set_leds(c);
|
|
state = LED_INIT;
|
|
break;
|
|
default:
|
|
state = LED_INIT;
|
|
}
|
|
}
|
|
|
|
/* Bluetooth mode when ready */
|
|
if (!config_mode && !force_usb) {
|
|
if (!rn42_rts() && host_get_driver() != &rn42_driver) {
|
|
clear_keyboard();
|
|
host_set_driver(&rn42_driver);
|
|
} else if (rn42_rts() && host_get_driver() != &lufa_driver) {
|
|
clear_keyboard();
|
|
host_set_driver(&lufa_driver);
|
|
}
|
|
}
|
|
|
|
|
|
static uint16_t prev_timer = 0;
|
|
uint16_t e = timer_elapsed(prev_timer);
|
|
if (e > 1000) {
|
|
/* every second */
|
|
prev_timer += e/1000*1000;
|
|
|
|
/* Low voltage alert */
|
|
uint8_t bs = battery_status();
|
|
if (bs == LOW_VOLTAGE) {
|
|
battery_led(LED_ON);
|
|
} else {
|
|
battery_led(LED_CHARGER);
|
|
}
|
|
|
|
/* every minute */
|
|
uint32_t t = timer_read32()/1000;
|
|
if (t%60 == 0) {
|
|
uint16_t v = battery_voltage();
|
|
uint8_t h = t/3600;
|
|
uint8_t m = t%3600/60;
|
|
uint8_t s = t%60;
|
|
dprintf("%02u:%02u:%02u\t%umV\n", h, m, s, v);
|
|
/* TODO: xprintf doesn't work for this.
|
|
xprintf("%02u:%02u:%02u\t%umV\n", (t/3600), (t%3600/60), (t%60), v);
|
|
*/
|
|
}
|
|
}
|
|
|
|
|
|
/* Connection monitor */
|
|
if (!rn42_rts() && rn42_linked()) {
|
|
status_led(true);
|
|
} else {
|
|
status_led(false);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/******************************************************************************
|
|
* Command
|
|
******************************************************************************/
|
|
static host_driver_t *prev_driver = &rn42_driver;
|
|
|
|
static void print_rn42(void)
|
|
{
|
|
int16_t c;
|
|
while ((c = rn42_getc()) != -1) {
|
|
xprintf("%c", c);
|
|
}
|
|
}
|
|
|
|
static void clear_rn42(void)
|
|
{
|
|
while (rn42_getc() != -1) ;
|
|
}
|
|
|
|
#define SEND_STR(str) send_str(PSTR(str))
|
|
#define SEND_COMMAND(cmd) send_command(PSTR(cmd))
|
|
|
|
static void send_str(const char *str)
|
|
{
|
|
uint8_t c;
|
|
while ((c = pgm_read_byte(str++)))
|
|
rn42_putc(c);
|
|
}
|
|
|
|
static const char *send_command(const char *cmd)
|
|
{
|
|
static const char *s;
|
|
send_str(cmd);
|
|
wait_ms(500);
|
|
s = rn42_gets(100);
|
|
xprintf("%s\r\n", s);
|
|
print_rn42();
|
|
return s;
|
|
}
|
|
|
|
static void enter_command_mode(void)
|
|
{
|
|
prev_driver = host_get_driver();
|
|
clear_keyboard();
|
|
host_set_driver(&rn42_config_driver); // null driver; not to send a key to host
|
|
rn42_disconnect();
|
|
while (rn42_linked()) ;
|
|
|
|
print("Entering config mode ...\n");
|
|
wait_ms(1100); // need 1 sec
|
|
SEND_COMMAND("$$$");
|
|
wait_ms(600); // need 1 sec
|
|
print_rn42();
|
|
const char *s = SEND_COMMAND("v\r\n");
|
|
if (strncmp("v", s, 1) != 0) SEND_COMMAND("+\r\n"); // local echo on
|
|
}
|
|
|
|
static void exit_command_mode(void)
|
|
{
|
|
print("Exiting config mode ...\n");
|
|
SEND_COMMAND("---\r\n"); // exit
|
|
|
|
rn42_autoconnect();
|
|
clear_keyboard();
|
|
host_set_driver(prev_driver);
|
|
}
|
|
|
|
static void init_rn42(void)
|
|
{
|
|
// RN-42 configure
|
|
if (!config_mode) enter_command_mode();
|
|
SEND_COMMAND("SF,1\r\n"); // factory defaults
|
|
SEND_COMMAND("S-,TmkBT\r\n");
|
|
SEND_COMMAND("SS,Keyboard/Mouse\r\n");
|
|
SEND_COMMAND("SM,4\r\n"); // auto connect(DTR)
|
|
SEND_COMMAND("SW,8000\r\n"); // Sniff disable
|
|
SEND_COMMAND("S~,6\r\n"); // HID profile
|
|
SEND_COMMAND("SH,003C\r\n"); // combo device, out-report, 4-reconnect
|
|
SEND_COMMAND("SY,FFF4\r\n"); // transmit power -12
|
|
SEND_COMMAND("R,1\r\n");
|
|
if (!config_mode) exit_command_mode();
|
|
}
|
|
|
|
#if 0
|
|
// Switching connections
|
|
// NOTE: Remote Address doesn't work in the way manual says.
|
|
// EEPROM address for link store
|
|
#define RN42_LINK0 (uint8_t *)128
|
|
#define RN42_LINK1 (uint8_t *)140
|
|
#define RN42_LINK2 (uint8_t *)152
|
|
#define RN42_LINK3 (uint8_t *)164
|
|
static void store_link(uint8_t *eeaddr)
|
|
{
|
|
enter_command_mode();
|
|
SEND_STR("GR\r\n"); // remote address
|
|
const char *s = rn42_gets(500);
|
|
if (strcmp("GR", s) == 0) s = rn42_gets(500); // ignore local echo
|
|
xprintf("%s(%d)\r\n", s, strlen(s));
|
|
if (strlen(s) == 12) {
|
|
for (int i = 0; i < 12; i++) {
|
|
eeprom_write_byte(eeaddr+i, *(s+i));
|
|
dprintf("%c ", *(s+i));
|
|
}
|
|
dprint("\r\n");
|
|
}
|
|
exit_command_mode();
|
|
}
|
|
|
|
static void restore_link(const uint8_t *eeaddr)
|
|
{
|
|
enter_command_mode();
|
|
SEND_COMMAND("SR,Z\r\n"); // remove remote address
|
|
SEND_STR("SR,"); // set remote address from EEPROM
|
|
for (int i = 0; i < 12; i++) {
|
|
uint8_t c = eeprom_read_byte(eeaddr+i);
|
|
rn42_putc(c);
|
|
dprintf("%c ", c);
|
|
}
|
|
dprintf("\r\n");
|
|
SEND_COMMAND("\r\n");
|
|
SEND_COMMAND("R,1\r\n"); // reboot
|
|
exit_command_mode();
|
|
}
|
|
|
|
static const char *get_link(uint8_t * eeaddr)
|
|
{
|
|
static char s[13];
|
|
for (int i = 0; i < 12; i++) {
|
|
uint8_t c = eeprom_read_byte(eeaddr+i);
|
|
s[i] = c;
|
|
}
|
|
s[12] = '\0';
|
|
return s;
|
|
}
|
|
#endif
|
|
|
|
static void pairing(void)
|
|
{
|
|
enter_command_mode();
|
|
SEND_COMMAND("SR,Z\r\n"); // remove remote address
|
|
SEND_COMMAND("R,1\r\n"); // reboot
|
|
exit_command_mode();
|
|
}
|
|
|
|
bool command_extra(uint8_t code)
|
|
{
|
|
uint32_t t;
|
|
uint16_t b;
|
|
switch (code) {
|
|
case KC_H:
|
|
case KC_SLASH: /* ? */
|
|
print("\n\n----- Bluetooth RN-42 Help -----\n");
|
|
print("i: RN-42 info\n");
|
|
print("b: battery voltage\n");
|
|
print("Del: enter/exit RN-42 config mode\n");
|
|
print("Slck: RN-42 initialize\n");
|
|
#if 0
|
|
print("1-4: restore link\n");
|
|
print("F1-F4: store link\n");
|
|
#endif
|
|
print("p: pairing\n");
|
|
|
|
if (config_mode) {
|
|
return true;
|
|
} else {
|
|
print("u: toggle Force USB mode\n");
|
|
return false; // to display default command help
|
|
}
|
|
case KC_P:
|
|
pairing();
|
|
return true;
|
|
#if 0
|
|
/* Store link address to EEPROM */
|
|
case KC_F1:
|
|
store_link(RN42_LINK0);
|
|
return true;
|
|
case KC_F2:
|
|
store_link(RN42_LINK1);
|
|
return true;
|
|
case KC_F3:
|
|
store_link(RN42_LINK2);
|
|
return true;
|
|
case KC_F4:
|
|
store_link(RN42_LINK3);
|
|
return true;
|
|
/* Restore link address to EEPROM */
|
|
case KC_1:
|
|
restore_link(RN42_LINK0);
|
|
return true;
|
|
case KC_2:
|
|
restore_link(RN42_LINK1);
|
|
return true;
|
|
case KC_3:
|
|
restore_link(RN42_LINK2);
|
|
return true;
|
|
case KC_4:
|
|
restore_link(RN42_LINK3);
|
|
return true;
|
|
#endif
|
|
case KC_I:
|
|
print("\n----- RN-42 info -----\n");
|
|
xprintf("protocol: %s\n", (host_get_driver() == &rn42_driver) ? "RN-42" : "LUFA");
|
|
xprintf("force_usb: %X\n", force_usb);
|
|
xprintf("rn42: %s\n", rn42_rts() ? "OFF" : (rn42_linked() ? "CONN" : "ON"));
|
|
xprintf("rn42_autoconnecting(): %X\n", rn42_autoconnecting());
|
|
xprintf("config_mode: %X\n", config_mode);
|
|
xprintf("USB State: %s\n",
|
|
(USB_DeviceState == DEVICE_STATE_Unattached) ? "Unattached" :
|
|
(USB_DeviceState == DEVICE_STATE_Powered) ? "Powered" :
|
|
(USB_DeviceState == DEVICE_STATE_Default) ? "Default" :
|
|
(USB_DeviceState == DEVICE_STATE_Addressed) ? "Addressed" :
|
|
(USB_DeviceState == DEVICE_STATE_Configured) ? "Configured" :
|
|
(USB_DeviceState == DEVICE_STATE_Suspended) ? "Suspended" : "?");
|
|
xprintf("battery: ");
|
|
switch (battery_status()) {
|
|
case FULL_CHARGED: xprintf("FULL"); break;
|
|
case CHARGING: xprintf("CHARG"); break;
|
|
case DISCHARGING: xprintf("DISCHG"); break;
|
|
case LOW_VOLTAGE: xprintf("LOW"); break;
|
|
default: xprintf("?"); break;
|
|
};
|
|
xprintf("\n");
|
|
xprintf("RemoteWakeupEnabled: %X\n", USB_Device_RemoteWakeupEnabled);
|
|
xprintf("VBUS: %X\n", USBSTA&(1<<VBUS));
|
|
t = timer_read32()/1000;
|
|
uint8_t d = t/3600/24;
|
|
uint8_t h = t/3600;
|
|
uint8_t m = t%3600/60;
|
|
uint8_t s = t%60;
|
|
xprintf("uptime: %02u %02u:%02u:%02u\n", d, h, m, s);
|
|
#if 0
|
|
xprintf("LINK0: %s\r\n", get_link(RN42_LINK0));
|
|
xprintf("LINK1: %s\r\n", get_link(RN42_LINK1));
|
|
xprintf("LINK2: %s\r\n", get_link(RN42_LINK2));
|
|
xprintf("LINK3: %s\r\n", get_link(RN42_LINK3));
|
|
#endif
|
|
return true;
|
|
case KC_B:
|
|
// battery monitor
|
|
t = timer_read32()/1000;
|
|
b = battery_voltage();
|
|
xprintf("BAT: %umV\t", b);
|
|
xprintf("%02u:", t/3600);
|
|
xprintf("%02u:", t%3600/60);
|
|
xprintf("%02u\n", t%60);
|
|
return true;
|
|
case KC_U:
|
|
if (config_mode) return false;
|
|
if (force_usb) {
|
|
print("Auto mode\n");
|
|
force_usb = false;
|
|
} else {
|
|
print("USB mode\n");
|
|
force_usb = true;
|
|
clear_keyboard();
|
|
host_set_driver(&lufa_driver);
|
|
}
|
|
return true;
|
|
case KC_DELETE:
|
|
/* RN-42 Command mode */
|
|
if (rn42_autoconnecting()) {
|
|
enter_command_mode();
|
|
|
|
command_state = CONSOLE;
|
|
config_mode = true;
|
|
} else {
|
|
exit_command_mode();
|
|
|
|
command_state = ONESHOT;
|
|
config_mode = false;
|
|
}
|
|
return true;
|
|
case KC_SCROLLLOCK:
|
|
init_rn42();
|
|
return true;
|
|
default:
|
|
if (config_mode)
|
|
return true;
|
|
else
|
|
return false; // yield to default command
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* RN-42 Command mode
|
|
* sends charactors to the module
|
|
*/
|
|
static uint8_t code2asc(uint8_t code);
|
|
bool command_console_extra(uint8_t code)
|
|
{
|
|
rn42_putc(code2asc(code));
|
|
return true;
|
|
}
|
|
|
|
// convert keycode into ascii charactor
|
|
static uint8_t code2asc(uint8_t code)
|
|
{
|
|
bool shifted = (get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))) ? true : false;
|
|
switch (code) {
|
|
case KC_A: return (shifted ? 'A' : 'a');
|
|
case KC_B: return (shifted ? 'B' : 'b');
|
|
case KC_C: return (shifted ? 'C' : 'c');
|
|
case KC_D: return (shifted ? 'D' : 'd');
|
|
case KC_E: return (shifted ? 'E' : 'e');
|
|
case KC_F: return (shifted ? 'F' : 'f');
|
|
case KC_G: return (shifted ? 'G' : 'g');
|
|
case KC_H: return (shifted ? 'H' : 'h');
|
|
case KC_I: return (shifted ? 'I' : 'i');
|
|
case KC_J: return (shifted ? 'J' : 'j');
|
|
case KC_K: return (shifted ? 'K' : 'k');
|
|
case KC_L: return (shifted ? 'L' : 'l');
|
|
case KC_M: return (shifted ? 'M' : 'm');
|
|
case KC_N: return (shifted ? 'N' : 'n');
|
|
case KC_O: return (shifted ? 'O' : 'o');
|
|
case KC_P: return (shifted ? 'P' : 'p');
|
|
case KC_Q: return (shifted ? 'Q' : 'q');
|
|
case KC_R: return (shifted ? 'R' : 'r');
|
|
case KC_S: return (shifted ? 'S' : 's');
|
|
case KC_T: return (shifted ? 'T' : 't');
|
|
case KC_U: return (shifted ? 'U' : 'u');
|
|
case KC_V: return (shifted ? 'V' : 'v');
|
|
case KC_W: return (shifted ? 'W' : 'w');
|
|
case KC_X: return (shifted ? 'X' : 'x');
|
|
case KC_Y: return (shifted ? 'Y' : 'y');
|
|
case KC_Z: return (shifted ? 'Z' : 'z');
|
|
case KC_1: return (shifted ? '!' : '1');
|
|
case KC_2: return (shifted ? '@' : '2');
|
|
case KC_3: return (shifted ? '#' : '3');
|
|
case KC_4: return (shifted ? '$' : '4');
|
|
case KC_5: return (shifted ? '%' : '5');
|
|
case KC_6: return (shifted ? '^' : '6');
|
|
case KC_7: return (shifted ? '&' : '7');
|
|
case KC_8: return (shifted ? '*' : '8');
|
|
case KC_9: return (shifted ? '(' : '9');
|
|
case KC_0: return (shifted ? ')' : '0');
|
|
case KC_ENTER: return '\n';
|
|
case KC_ESCAPE: return 0x1B;
|
|
case KC_BSPACE: return '\b';
|
|
case KC_TAB: return '\t';
|
|
case KC_SPACE: return ' ';
|
|
case KC_MINUS: return (shifted ? '_' : '-');
|
|
case KC_EQUAL: return (shifted ? '+' : '=');
|
|
case KC_LBRACKET: return (shifted ? '{' : '[');
|
|
case KC_RBRACKET: return (shifted ? '}' : ']');
|
|
case KC_BSLASH: return (shifted ? '|' : '\\');
|
|
case KC_NONUS_HASH: return (shifted ? '|' : '\\');
|
|
case KC_SCOLON: return (shifted ? ':' : ';');
|
|
case KC_QUOTE: return (shifted ? '"' : '\'');
|
|
case KC_GRAVE: return (shifted ? '~' : '`');
|
|
case KC_COMMA: return (shifted ? '<' : ',');
|
|
case KC_DOT: return (shifted ? '>' : '.');
|
|
case KC_SLASH: return (shifted ? '?' : '/');
|
|
case KC_DELETE: return '\0'; // Delete to disconnect
|
|
default: return ' ';
|
|
}
|
|
}
|