You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h

244 lines
8.8 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief Board specific Dataflash driver header for the original Atmel XPLAIN.
* \copydetails Group_Dataflash_XPLAIN
*
* \note This file should not be included directly. It is automatically included as needed by the dataflash driver
* dispatch header located in LUFA/Drivers/Board/Dataflash.h.
*/
/** \ingroup Group_Dataflash
* \defgroup Group_Dataflash_XPLAIN_REV1 XPLAIN_REV1
* \brief Board specific Dataflash driver header for the original Atmel XPLAIN, revision 1.
*
* See \ref Group_Dataflash_XPLAIN for more details.
*/
/** \ingroup Group_Dataflash
* \defgroup Group_Dataflash_XPLAIN XPLAIN
* \brief Board specific Dataflash driver header for the original Atmel XPLAIN.
*
* \note For the first revision XPLAIN board, compile with <code>BOARD = BOARD_XPLAIN_REV1</code>.
*
* Board specific Dataflash driver header for the Atmel XPLAIN.
*
* <b>Revision 1 Boards</b>:
* <table>
* <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
* <tr><td>DATAFLASH_CHIP1</td><td>AT45DB041D (512KB)</td><td>PORTB.5</td><td>SPI0</td></tr>
* </table>
*
* <b>Other Board Revisions</b>:
* <table>
* <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
* <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTB.5</td><td>SPI0</td></tr>
* </table>
*
* @{
*/
#ifndef __DATAFLASH_XPLAIN_H__
#define __DATAFLASH_XPLAIN_H__
/* Includes: */
#include "../../../../Common/Common.h"
#include "../../../Misc/AT45DB642D.h"
#include "../../../Peripheral/SPI.h"
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_DATAFLASH_H)
#error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
#endif
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
#define DATAFLASH_CHIPCS_MASK DATAFLASH_CHIP1
#define DATAFLASH_CHIPCS_DDR DDRB
#define DATAFLASH_CHIPCS_PORT PORTB
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** Constant indicating the total number of dataflash ICs mounted on the selected board. */
#define DATAFLASH_TOTALCHIPS 1
/** Mask for no dataflash chip selected. */
#define DATAFLASH_NO_CHIP 0
/** Mask for the first dataflash chip selected. */
#define DATAFLASH_CHIP1 (1 << 5)
#if ((BOARD != BOARD_XPLAIN_REV1) || defined(__DOXYGEN__))
/** Internal main memory page size for the board's dataflash ICs. */
#define DATAFLASH_PAGE_SIZE 1024
/** Total number of pages inside each of the board's dataflash ICs. */
#define DATAFLASH_PAGES 8192
#else
#define DATAFLASH_PAGE_SIZE 256
#define DATAFLASH_PAGES 2048
#endif
/* Inline Functions: */
/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(void)
{
DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
}
/** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
*
* \param[in] Byte Byte of data to send to the dataflash
*
* \return Last response byte from the dataflash
*/
static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
{
return SPI_TransferByte(Byte);
}
/** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
*
* \param[in] Byte Byte of data to send to the dataflash
*/
static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void Dataflash_SendByte(const uint8_t Byte)
{
SPI_SendByte(Byte);
}
/** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
*
* \return Last response byte from the dataflash
*/
static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
static inline uint8_t Dataflash_ReceiveByte(void)
{
return SPI_ReceiveByte();
}
/** Determines the currently selected dataflash chip.
*
* \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
* or a DATAFLASH_CHIPn mask (where n is the chip number).
*/
static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
static inline uint8_t Dataflash_GetSelectedChip(void)
{
return (~DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK);
}
/** Selects the given dataflash chip.
*
* \param[in] ChipMask Mask of the Dataflash IC to select, in the form of a \c DATAFLASH_CHIPn mask (where n is
* the chip number).
*/
static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
static inline void Dataflash_SelectChip(const uint8_t ChipMask)
{
DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT | DATAFLASH_CHIPCS_MASK) & ~ChipMask);
}
/** Deselects the current dataflash chip, so that no dataflash is selected. */
static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
static inline void Dataflash_DeselectChip(void)
{
Dataflash_SelectChip(DATAFLASH_NO_CHIP);
}
/** Selects a dataflash IC from the given page number, which should range from 0 to
* ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
* dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
* the total number of pages contained in the boards dataflash ICs, all dataflash ICs
* are deselected.
*
* \param[in] PageAddress Address of the page to manipulate, ranging from
* 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
*/
static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
{
Dataflash_DeselectChip();
if (PageAddress >= DATAFLASH_PAGES)
return;
Dataflash_SelectChip(DATAFLASH_CHIP1);
}
/** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
* a new command.
*/
static inline void Dataflash_ToggleSelectedChipCS(void)
{
uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
Dataflash_DeselectChip();
Dataflash_SelectChip(SelectedChipMask);
}
/** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
* memory page program or main memory to buffer transfer.
*/
static inline void Dataflash_WaitWhileBusy(void)
{
Dataflash_ToggleSelectedChipCS();
Dataflash_SendByte(DF_CMD_GETSTATUS);
while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
Dataflash_ToggleSelectedChipCS();
}
/** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
* dataflash commands which require a complete 24-bit address.
*
* \param[in] PageAddress Page address within the selected dataflash IC
* \param[in] BufferByte Address within the dataflash's buffer
*/
static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
const uint16_t BufferByte)
{
Dataflash_SendByte(PageAddress >> 5);
Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
Dataflash_SendByte(BufferByte);
}
#endif
/** @} */