You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Projects/AVRISP/Lib/V2Protocol.c

620 lines
19 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* V2Protocol handler, to process V2 Protocol commands used in Atmel programmer devices.
*/
#define INCLUDE_FROM_V2PROTOCOL_C
#include "V2Protocol.h"
/** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host.
* This routine decodes the issued command and passes off the handling of the command to the
* appropriate function.
*/
void V2Protocol_ProcessCommand(void)
{
uint8_t V2Command = Endpoint_Read_Byte();
switch (V2Command)
{
case CMD_SIGN_ON:
V2Protocol_Command_SignOn();
break;
case CMD_SET_PARAMETER:
case CMD_GET_PARAMETER:
V2Protocol_Command_GetSetParam(V2Command);
break;
case CMD_LOAD_ADDRESS:
V2Protocol_Command_LoadAddress();
break;
case CMD_RESET_PROTECTION:
V2Protocol_Command_ResetProtection();
break;
case CMD_ENTER_PROGMODE_ISP:
V2Protocol_Command_EnterISPMode();
break;
case CMD_LEAVE_PROGMODE_ISP:
V2Protocol_Command_LeaveISPMode();
break;
case CMD_PROGRAM_FLASH_ISP:
case CMD_PROGRAM_EEPROM_ISP:
V2Protocol_Command_ProgramMemory(V2Command);
break;
case CMD_READ_FLASH_ISP:
case CMD_READ_EEPROM_ISP:
V2Protocol_Command_ReadMemory(V2Command);
break;
case CMD_CHIP_ERASE_ISP:
V2Protocol_Command_ChipErase();
break;
case CMD_READ_FUSE_ISP:
case CMD_READ_LOCK_ISP:
case CMD_READ_SIGNATURE_ISP:
case CMD_READ_OSCCAL_ISP:
V2Protocol_Command_ReadFuseLockSigOSCCAL(V2Command);
break;
case CMD_PROGRAM_FUSE_ISP:
case CMD_PROGRAM_LOCK_ISP:
V2Protocol_Command_WriteFuseLock(V2Command);
break;
case CMD_SPI_MULTI:
V2Protocol_Command_SPIMulti();
break;
default:
V2Protocol_Command_Unknown(V2Command);
break;
}
Endpoint_WaitUntilReady();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
}
/** Handler for unknown V2 protocol commands. This discards all sent data and returns a
* STATUS_CMD_UNKNOWN status back to the host.
*
* \param[in] V2Command Issued V2 Protocol command byte from the host
*/
static void V2Protocol_Command_Unknown(uint8_t V2Command)
{
/* Discard all incoming data */
while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)
{
Endpoint_ClearOUT();
Endpoint_WaitUntilReady();
}
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_UNKNOWN);
Endpoint_ClearIN();
}
/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */
static void V2Protocol_Command_SignOn(void)
{
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(CMD_SIGN_ON);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(sizeof(PROGRAMMER_ID) - 1);
Endpoint_Write_Stream_LE(PROGRAMMER_ID, (sizeof(PROGRAMMER_ID) - 1));
Endpoint_ClearIN();
}
/** Handler for the CMD_SET_PARAMETER and CMD_GET_PARAMETER commands from the host, setting or
* getting a device parameter's value from the parameter table.
*
* \param[in] V2Command Issued V2 Protocol command byte from the host
*/
static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
{
uint8_t ParamID = Endpoint_Read_Byte();
uint8_t ParamValue;
if (V2Command == CMD_SET_PARAMETER)
ParamValue = Endpoint_Read_Byte();
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(V2Command);
uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);
if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
{
Endpoint_Write_Byte(STATUS_CMD_OK);
V2Params_SetParameterValue(ParamID, ParamValue);
}
else if ((V2Command == CMD_GET_PARAMETER) && (ParamPrivs & PARAM_PRIV_READ))
{
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(V2Params_GetParameterValue(ParamID));
}
else
{
Endpoint_Write_Byte(STATUS_CMD_FAILED);
}
Endpoint_ClearIN();
}
/** Handler for the CMD_LOAD_ADDRESS command, loading the given device address into a
* global storage variable for later use, and issuing LOAD EXTENDED ADDRESS commands
* to the attached device as required.
*/
static void V2Protocol_Command_LoadAddress(void)
{
Endpoint_Read_Stream_BE(&CurrentAddress, sizeof(CurrentAddress));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
if (CurrentAddress & (1UL << 31))
V2Protocol_LoadExtendedAddress();
Endpoint_Write_Byte(CMD_LOAD_ADDRESS);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
/** Handler for the CMD_RESET_PROTECTION command, currently implemented as a dummy ACK function
* as no ISP short-circuit protection is currently implemented.
*/
static void V2Protocol_Command_ResetProtection(void)
{
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(CMD_RESET_PROTECTION);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
/** Handler for the CMD_ENTER_PROGMODE_ISP command, which attempts to enter programming mode on
* the attached device, returning success or failure back to the host.
*/
static void V2Protocol_Command_EnterISPMode(void)
{
struct
{
uint8_t TimeoutMS;
uint8_t PinStabDelayMS;
uint8_t ExecutionDelayMS;
uint8_t SynchLoops;
uint8_t ByteDelay;
uint8_t PollValue;
uint8_t PollIndex;
uint8_t EnterProgBytes[4];
} Enter_ISP_Params;
Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ResponseStatus = STATUS_CMD_FAILED;
CurrentAddress = 0;
V2Protocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
SPI_Init(V2Protocol_GetSPIPrescalerMask() | SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_MODE_MASTER);
while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED))
{
uint8_t ResponseBytes[4];
V2Protocol_ChangeTargetResetLine(true);
V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
{
V2Protocol_DelayMS(Enter_ISP_Params.ByteDelay);
ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
}
/* Check if polling disabled, or if the polled value matches the expected value */
if (!(Enter_ISP_Params.PollIndex) || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue))
{
ResponseStatus = STATUS_CMD_OK;
}
else
{
V2Protocol_ChangeTargetResetLine(false);
V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
}
}
Endpoint_Write_Byte(CMD_ENTER_PROGMODE_ISP);
Endpoint_Write_Byte(ResponseStatus);
Endpoint_ClearIN();
}
/** Handler for the CMD_LEAVE_ISP command, which releases the target from programming mode. */
static void V2Protocol_Command_LeaveISPMode(void)
{
struct
{
uint8_t PreDelayMS;
uint8_t PostDelayMS;
} Leave_ISP_Params;
Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
V2Protocol_DelayMS(Leave_ISP_Params.PreDelayMS);
V2Protocol_ChangeTargetResetLine(false);
SPI_ShutDown();
V2Protocol_DelayMS(Leave_ISP_Params.PostDelayMS);
Endpoint_Write_Byte(CMD_LEAVE_PROGMODE_ISP);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
/** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes,
* words or pages of data to the attached device.
*
* \param[in] V2Command Issued V2 Protocol command byte from the host
*/
static void V2Protocol_Command_ProgramMemory(uint8_t V2Command)
{
struct
{
uint16_t BytesToWrite;
uint8_t ProgrammingMode;
uint8_t DelayMS;
uint8_t ProgrammingCommands[3];
uint8_t PollValue1;
uint8_t PollValue2;
uint8_t ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the
} Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting
Endpoint_Read_Stream_LE(&Write_Memory_Params, sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData));
Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData))
{
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_FAILED);
Endpoint_ClearIN();
return;
}
Endpoint_Read_Stream_LE(&Write_Memory_Params.ProgData, Write_Memory_Params.BytesToWrite);
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ProgrammingStatus = STATUS_CMD_OK;
uint16_t PollAddress = 0;
uint8_t PollValue = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 :
Write_Memory_Params.PollValue2;
uint8_t* NextWriteByte = Write_Memory_Params.ProgData;
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK)
{
uint16_t StartAddress = (CurrentAddress & 0xFFFF);
/* Paged mode memory programming */
for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
{
bool IsOddByte = (CurrentByte & 0x01);
uint8_t ByteToWrite = *(NextWriteByte++);
if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP))
Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK;
else
Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK;
SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
SPI_SendByte(CurrentAddress >> 8);
SPI_SendByte(CurrentAddress & 0xFF);
SPI_SendByte(ByteToWrite);
if (!(PollAddress) && (ByteToWrite != PollValue))
{
if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP))
Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK;
PollAddress = (CurrentAddress & 0xFFFF);
}
if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP))
CurrentAddress++;
}
/* If the current page must be committed, send the PROGRAM PAGE command to the target */
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK)
{
SPI_SendByte(Write_Memory_Params.ProgrammingCommands[1]);
SPI_SendByte(StartAddress >> 8);
SPI_SendByte(StartAddress & 0xFF);
SPI_SendByte(0x00);
/* Check if polling is possible, if not switch to timed delay mode */
if (!(PollAddress))
{
Write_Memory_Params.ProgrammingMode &= ~PROG_MODE_PAGED_VALUE_MASK;
Write_Memory_Params.ProgrammingMode |= PROG_MODE_PAGED_TIMEDELAY_MASK;
}
ProgrammingStatus = V2Protocol_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue,
Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]);
}
}
else
{
/* Word/byte mode memory programming */
for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
{
bool IsOddByte = (CurrentByte & 0x01);
uint8_t ByteToWrite = *(NextWriteByte++);
if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP))
Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK;
else
Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK;
SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
SPI_SendByte(CurrentAddress >> 8);
SPI_SendByte(CurrentAddress & 0xFF);
SPI_SendByte(ByteToWrite);
if (ByteToWrite != PollValue)
{
if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP))
Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK;
PollAddress = (CurrentAddress & 0xFFFF);
}
if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP))
CurrentAddress++;
ProgrammingStatus = V2Protocol_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue,
Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]);
if (ProgrammingStatus != STATUS_CMD_OK)
break;
}
}
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(ProgrammingStatus);
Endpoint_ClearIN();
}
/** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes,
* words or pages of data from the attached device.
*
* \param[in] V2Command Issued V2 Protocol command byte from the host
*/
static void V2Protocol_Command_ReadMemory(uint8_t V2Command)
{
struct
{
uint16_t BytesToRead;
uint8_t ReadMemoryCommand;
} Read_Memory_Params;
Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params));
Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead);
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++)
{
bool IsOddByte = (CurrentByte & 0x01);
if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP))
Read_Memory_Params.ReadMemoryCommand |= READ_WRITE_HIGH_BYTE_MASK;
else
Read_Memory_Params.ReadMemoryCommand &= ~READ_WRITE_HIGH_BYTE_MASK;
SPI_SendByte(Read_Memory_Params.ReadMemoryCommand);
SPI_SendByte(CurrentAddress >> 8);
SPI_SendByte(CurrentAddress & 0xFF);
Endpoint_Write_Byte(SPI_ReceiveByte());
/* Check if the endpoint bank is currently full */
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearIN();
Endpoint_WaitUntilReady();
}
if ((IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) || (V2Command == CMD_READ_EEPROM_ISP))
CurrentAddress++;
}
Endpoint_Write_Byte(STATUS_CMD_OK);
bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
Endpoint_ClearIN();
/* Ensure last packet is a short packet to terminate the transfer */
if (IsEndpointFull)
{
Endpoint_WaitUntilReady();
Endpoint_ClearIN();
Endpoint_WaitUntilReady();
}
}
/** Handler for the CMD_CHI_ERASE_ISP command, clearing the target's FLASH memory. */
static void V2Protocol_Command_ChipErase(void)
{
struct
{
uint8_t EraseDelayMS;
uint8_t PollMethod;
uint8_t EraseCommandBytes[4];
} Erase_Chip_Params;
Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ResponseStatus = STATUS_CMD_OK;
for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++)
SPI_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]);
if (!(Erase_Chip_Params.PollMethod))
V2Protocol_DelayMS(Erase_Chip_Params.EraseDelayMS);
else
ResponseStatus = V2Protocol_WaitWhileTargetBusy();
Endpoint_Write_Byte(CMD_CHIP_ERASE_ISP);
Endpoint_Write_Byte(ResponseStatus);
Endpoint_ClearIN();
}
/** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands,
* reading the requested configuration byte from the device.
*
* \param[in] V2Command Issued V2 Protocol command byte from the host
*/
static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command)
{
struct
{
uint8_t RetByte;
uint8_t ReadCommandBytes[4];
} Read_FuseLockSigOSCCAL_Params;
Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ResponseBytes[4];
for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
ResponseBytes[RByte] = SPI_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
/** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration
* byte to the device.
*
* \param[in] V2Command Issued V2 Protocol command byte from the host
*/
static void V2Protocol_Command_WriteFuseLock(uint8_t V2Command)
{
struct
{
uint8_t WriteCommandBytes[4];
} Write_FuseLockSig_Params;
Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++)
SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
/** Handler for the CMD_SPI_MULTI command, writing and reading arbitrary SPI data to and from the attached device. */
static void V2Protocol_Command_SPIMulti(void)
{
struct
{
uint8_t TxBytes;
uint8_t RxBytes;
uint8_t RxStartAddr;
uint8_t TxData[255];
} SPI_Multi_Params;
Endpoint_Read_Stream_LE(&SPI_Multi_Params, sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData));
Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes);
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(CMD_SPI_MULTI);
Endpoint_Write_Byte(STATUS_CMD_OK);
uint8_t CurrTxPos = 0;
uint8_t CurrRxPos = 0;
/* Write out bytes to transmit until the start of the bytes to receive is met */
while (CurrTxPos < SPI_Multi_Params.RxStartAddr)
{
if (CurrTxPos < SPI_Multi_Params.TxBytes)
SPI_SendByte(SPI_Multi_Params.TxData[CurrTxPos]);
else
SPI_SendByte(0);
CurrTxPos++;
}
/* Transmit remaining bytes with padding as needed, read in response bytes */
while (CurrRxPos < SPI_Multi_Params.RxBytes)
{
if (CurrTxPos < SPI_Multi_Params.TxBytes)
Endpoint_Write_Byte(SPI_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++]));
else
Endpoint_Write_Byte(SPI_ReceiveByte());
CurrRxPos++;
}
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}