fauxpark
0bd03150e5
|
5 years ago | |
---|---|---|
.. | ||
keymaps | [Keyboard] Add Unikorn 60 tsangan_hhkb layout (#6390) | 6 years ago |
config.h | Remove NO_BACKLIGHT_CLOCK (#6418) | 5 years ago |
info.json | [Keyboard] Add Unikorn 60 tsangan_hhkb layout (#6390) | 6 years ago |
readme.md | update docs based on fireworm's comments | 6 years ago |
rules.mk | [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) | 6 years ago |
unikorn.c | [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) | 6 years ago |
unikorn.h | [Keyboard] Add Unikorn 60 tsangan_hhkb layout (#6390) | 6 years ago |
usbconfig.h | [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) | 6 years ago |
readme.md
Unikorn 60
60% PCB made for the TGR x SINGA Unikorn60.
Keyboard Maintainer: MechMerlin
Hardware Supported: Unikorn 60 PCB
Hardware Availability: Geekhack GB
Make example for this keyboard (after setting up your build environment):
make unikorn:default
This PCB can support RGB underglow. There are pads on the bottom of the PCB for the LED controller chip and for 17 RGB underglow LEDs. The Unikorn 60 case does not have acrylic pieces to properly display underglow effects.
To enable RGB lighting support, install the necessary components and set RGBLIGHT features in rules.mk
like so:
RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
Flashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
Reset Key: Short the two holes labeled FW_JP
underneath the PCB, beside the Tab key while plugging in the keyboard.
Do not confuse this with the LED holes of the switch in the Tab
position. FW_JP
is not reachable from the top as the plate blocks access to it.
It is recommended to program a RESET
key in your keymap.
Windows:
- Download HIDBootFlash.
- Place your keyboard into reset.
- Press the
Find Device
button and ensure that your keyboard is found. - Press the
Open .hex File
button and locate the.hex
file you created. - Press the
Flash Device
button and wait for the process to complete.
macOS:
-
Install homebrew by typing the following:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
-
Install
crosspack-avr
.brew cask install crosspack-avr
-
Install the following packages:
brew install python3 pip3 install pyusb brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-
Place your keyboard into reset.
-
Flash the board by typing
bootloadHID -r
followed by the path to your.hex
file.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.