You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Device/MIDI/MIDI.c

220 lines
7.5 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the MIDI input demo. This file contains the main tasks of the demo and
* is responsible for the initial application hardware configuration.
*/
#include "MIDI.h"
/* Scheduler Task List */
TASK_LIST
{
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_MIDI_Task , .TaskStatus = TASK_STOP },
};
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
Joystick_Init();
LEDs_Init();
Buttons_Init();
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
/* Initialize Scheduler so that it can be used */
Scheduler_Init();
/* Initialize USB Subsystem */
USB_Init();
/* Scheduling - routine never returns, so put this last in the main function */
Scheduler_Start();
}
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
/* Indicate USB enumerating */
UpdateStatus(Status_USBEnumerating);
}
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.
*/
void EVENT_USB_Disconnect(void)
{
/* Stop running audio and USB management tasks */
Scheduler_SetTaskMode(USB_MIDI_Task, TASK_STOP);
Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
}
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.
*/
void EVENT_USB_ConfigurationChanged(void)
{
/* Setup MIDI stream endpoints */
Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK,
ENDPOINT_DIR_OUT, MIDI_STREAM_EPSIZE,
ENDPOINT_BANK_SINGLE);
Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPNUM, EP_TYPE_BULK,
ENDPOINT_DIR_IN, MIDI_STREAM_EPSIZE,
ENDPOINT_BANK_SINGLE);
/* Indicate USB connected and ready */
UpdateStatus(Status_USBReady);
/* Start MIDI task */
Scheduler_SetTaskMode(USB_MIDI_Task, TASK_RUN);
}
/** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them
* to the host.
*/
TASK(USB_MIDI_Task)
{
static uint8_t PrevJoystickStatus;
/* Select the MIDI IN stream */
Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);
/* Check if endpoint is ready to be written to */
if (Endpoint_IsINReady())
{
/* Get current joystick mask, XOR with previous to detect joystick changes */
uint8_t JoystickStatus = Joystick_GetStatus();
uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
if (JoystickChanges & JOY_LEFT)
SendMIDINoteChange(0x3C, (JoystickStatus & JOY_LEFT), 0, Channel);
if (JoystickChanges & JOY_UP)
SendMIDINoteChange(0x3D, (JoystickStatus & JOY_UP), 0, Channel);
if (JoystickChanges & JOY_RIGHT)
SendMIDINoteChange(0x3E, (JoystickStatus & JOY_RIGHT), 0, Channel);
if (JoystickChanges & JOY_DOWN)
SendMIDINoteChange(0x3F, (JoystickStatus & JOY_DOWN), 0, Channel);
if (JoystickChanges & JOY_PRESS)
SendMIDINoteChange(0x3B, (JoystickStatus & JOY_PRESS), 0, Channel);
/* Save previous joystick value for next joystick change detection */
PrevJoystickStatus = JoystickStatus;
}
/* Select the MIDI OUT stream */
Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPNUM);
/* Check if endpoint is ready to be read from, if so discard its (unused) data */
if (Endpoint_IsOUTReceived())
Endpoint_ClearOUT();
}
/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
* log to a serial port, or anything else that is suitable for status updates.
*
* \param CurrentStatus Current status of the system, from the MIDI_StatusCodes_t enum
*/
void UpdateStatus(uint8_t CurrentStatus)
{
uint8_t LEDMask = LEDS_NO_LEDS;
/* Set the LED mask to the appropriate LED mask based on the given status code */
switch (CurrentStatus)
{
case Status_USBNotReady:
LEDMask = (LEDS_LED1);
break;
case Status_USBEnumerating:
LEDMask = (LEDS_LED1 | LEDS_LED2);
break;
case Status_USBReady:
LEDMask = (LEDS_LED2 | LEDS_LED4);
break;
}
/* Set the board LEDs to the new LED mask */
LEDs_SetAllLEDs(LEDMask);
}
/** Sends a MIDI note change event (note on or off) to the MIDI output jack, on the given virtual cable ID and channel.
*
* \param Pitch Pitch of the note to turn on or off
* \param OnOff Set to true if the note is on (being held down), or false otherwise
* \param CableID ID of the virtual cable to send the note change to
* \param Channel MIDI channel number to send the note change event to
*/
void SendMIDINoteChange(const uint8_t Pitch, const bool OnOff, const uint8_t CableID, const uint8_t Channel)
{
/* Wait until endpoint ready for more data */
while (!(Endpoint_IsReadWriteAllowed()));
/* Check if the message should be a Note On or Note Off command */
uint8_t Command = ((OnOff)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
/* Write the Packet Header to the endpoint */
Endpoint_Write_Byte((CableID << 4) | (Command >> 4));
/* Write the Note On/Off command with the specified channel, pitch and velocity */
Endpoint_Write_Byte(Command | Channel);
Endpoint_Write_Byte(Pitch);
Endpoint_Write_Byte(MIDI_STANDARD_VELOCITY);
/* Send the data in the endpoint to the host */
Endpoint_ClearIN();
}