You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt

97 lines
3.2 KiB

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Audio Output Device Demo
*
* \section SSec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* - Series 7 USB AVRs
* - Series 6 USB AVRs
* - Series 4 USB AVRs
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Audio Class</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Standard Audio Device</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Audio Class Specification</td>
* <td>USBIF Audio Class Terminal Types Specification</td>
* <td>USBIF Audio Data Formats Specification</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Audio demonstration application. This gives a simple reference
* application for implementing a USB Audio Output device using the
* basic USB Audio drivers in all modern OSes (i.e. no special drivers
* required).
*
* On start-up the system will automatically enumerate and function
* as a USB speaker. Outgoing audio will output in 8-bit PWM onto
* the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on
* timer 3 channels A and B for AUDIO_OUT_STEREO and on PORTC as a signed
* mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
* the board LEDs in all modes. Decouple audio outputs with a capacitor and
* attach to a speaker to hear the audio.
*
* Under Windows, if a driver request dialogue pops up, select the option
* to automatically install the appropriate drivers.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td><b>Define Name:</b></td>
* <td><b>Location:</b></td>
* <td><b>Description:</b></td>
* </tr>
* <tr>
* <td>AUDIO_OUT_STEREO</td>
* <td>Makefile CDEFS</td>
* <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_MONO</td>
* <td>Makefile CDEFS</td>
* <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_PORTC</td>
* <td>Makefile CDEFS</td>
* <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
* external DAC.</td>
* </tr>
* <tr>
* <td>AUDIO_SAMPLE_FREQUENCY</td>
* <td>Descriptors.h</td>
* <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>
* </tr>
* </table>
*/