You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
132 lines
10 KiB
132 lines
10 KiB
/** \file
|
|
*
|
|
* This file contains special DoxyGen information for the generation of the main page and other special
|
|
* documentation pages. It is not a project source file.
|
|
*/
|
|
|
|
/** \page Page_GettingStarted Getting Started
|
|
*
|
|
* Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and
|
|
* ultimately build upon for your own projects. All the demos come pre-configured to build and run correctly
|
|
* on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz master clock.
|
|
* This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most popular Atmel
|
|
* USB demonstration board to date.
|
|
*
|
|
*
|
|
* \section Sec_Prerequisites Prerequisites
|
|
* Before you can compile any of the LUFA library code or demos, you will need a recent distribution of avr-libc (1.6.2+)
|
|
* and the AVR-GCC (4.2+) compiler. For Windows users, the best way to obtain these is the WinAVR project
|
|
* (http://winavr.sourceforge.net) as this provides a single-file setup for everything required to compile your
|
|
* own AVR projects.
|
|
*
|
|
*
|
|
* \section Sec_Configuring Configuring the Demos, Bootloaders and Projects
|
|
* If the target AVR model, clock speed, board or other settings are different to the current settings, they must be changed
|
|
* and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project
|
|
* configuration options are located in the "makefile" build script inside each LUFA application's folder, however some
|
|
* demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the
|
|
* main .c source file of the project. See each project's individual documentation for application-specific configuration
|
|
* values.
|
|
*
|
|
* Each project "makefile" contains all the script and configuration data required to compile each project. When opened with
|
|
* any regular basic text editor such as Notepad or WordPad (ensure that the save format is a pure ASCII text format) the
|
|
* build configuration settings may be altered.
|
|
*
|
|
* Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For
|
|
* each application, the important variables which should be altered are:
|
|
*
|
|
* - <b>MCU</b>, the target AVR processor.
|
|
* - <b>BOARD</b>, the target board hardware
|
|
* - <b>F_CLOCK</b>, the target raw master clock frequency, before any prescaling is performed
|
|
* - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling
|
|
* - <b>CDEFS</b>, the C preprocessor defines which configure the source code
|
|
*
|
|
* These values should be changed to reflect the build hardware.
|
|
*
|
|
* \subsection SSec_MCU The MCU Parameter
|
|
* This parameter indicates the target AVR model for the compiled application. This should be set to the model of the target AVR
|
|
* (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the
|
|
* USB AVR models, as they may make use of peripherals or modes only present in some devices.
|
|
*
|
|
* For supported library AVR models, see main documentation page.
|
|
*
|
|
* \subsection SSec_BOARD The BOARD Parameter
|
|
* This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific,
|
|
* such as the LED driver, and the library needs to know the layout of the target board. If you are using one of the board models listed
|
|
* on the main library page, change this parameter to the board name in all UPPER-case.
|
|
*
|
|
* If you are not using any board-specific drivers in the LUFA library, or you are using a custom board layout, change this to read
|
|
* "USER" (no quotes) instead of a standard board name. If the USER board type is selected and the application makes use of one or more
|
|
* board-specific hardware drivers inside the LUFA library, then the appropriate stub drives files should be copied from the /BoardStubs/
|
|
* directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the
|
|
* custom board's hardware.
|
|
*
|
|
* \subsection SSec_F_CLOCK The F_CLOCK Parameter
|
|
* This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the
|
|
* USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the
|
|
* clock input. The PLL then feeds the USB and other sections of the AVR with the correct upscaled frequencies required for those sections to function.
|
|
*
|
|
* <b>Note that this value does not actually *alter* the AVR's input clock frequency</b>, it is just a way to indicate to the library the clock frequency
|
|
* of the AVR as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more
|
|
* library components will occur.
|
|
*
|
|
* \subsection SSec_F_CPU The F_CPU Parameter
|
|
* This parameter indicates the target AVR's master CPU clock frequency, in Hz.
|
|
*
|
|
* <b>Note that this value does not actually *alter* the AVR's CPU clock frequency</b>, it is just a way to indicate to the library the clock frequency
|
|
* of the AVR core as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more
|
|
* library components will occur.
|
|
*
|
|
* \subsection SSec_CDEFS The CDEFS Parameter
|
|
* Most applications will actually have multiple CDEF lines, which are concatenated together with the "+=" operator. This ensures that large
|
|
* numbers of configuration options remain readable by splitting up groups of options into separate lines.
|
|
*
|
|
* Normally, these options do not need to be altered to allow an application to compile and run correctly on a different board or AVR to the
|
|
* current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR model and cannot be
|
|
* made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both), the USB
|
|
* interface speed (Low or Full speed) and other LUFA configuration options can be set here - refer to the library documentation for details on the
|
|
* configuration parameters.
|
|
*
|
|
*
|
|
* \section Sec_Compiling Compiling a LUFA Application
|
|
* Compiling the LUFA demos, applications and/or bootloaders is very simple. LUFA comes with makefile scripts for
|
|
* each individual demo, bootloader and project folder, as well as scripts in the /Demos/, /Bootloaders/, /Projects/
|
|
* and the LUFA root directory. This means that compilation can be started from any of the above directories, with
|
|
* a build started from an upper directory in the directory structure executing build of all child directories under it.
|
|
* This means that while a build inside a particular demo directory will build only that particular demo, a build stated
|
|
* from the /Demos/ directory will build all LUFA demo projects sequentially.
|
|
*
|
|
* \subsection SSec_CommandLine Via the Command Line
|
|
* To build a project from the source via the command line, the command <b>"make all"</b> should be executed from the command line in the directory
|
|
* of interest. To remove compiled files (including the binary output, all intermediately files and all diagnostic output
|
|
* files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the resulting binary will
|
|
* be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM variables, the generated ".EEP"
|
|
* file will contain the project's EEPROM data.
|
|
*
|
|
* \subsection SSec_AVRStudio Via AVRStudio
|
|
* Each demo, project and bootloader contains an AVRStudio project (.aps) which can be used to build each project. Once opened
|
|
* in AVRStudio, the project can be built and cleaned using the GUI buttons or menus. Note that the AVRStudio project files make
|
|
* use of the external project makefile, thus the procedure for configuring a demo remains the same regardless of the build environment.
|
|
*
|
|
*
|
|
* \section Sec_Programming Programming a USB AVR
|
|
* Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your
|
|
* application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the
|
|
* reprogramming an AVR device must be performed using a special piece of programming hardware, through one of the
|
|
* supported AVR programming protocols - ISP, HVSP, HVPP, JTAG or dW. This can be done through a custom programmer,
|
|
* a third party programmer, or an official Atmel AVR tool - for more information, see the Atmel.com website.
|
|
*
|
|
* Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel
|
|
* DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the
|
|
* AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB.
|
|
* Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased
|
|
* or broken without an external programming device. They have disadvantages however; they cannot change the fuses of
|
|
* the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the
|
|
* AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the
|
|
* loaded application. Atmel's DFU bootloader is either 4KB (for the smaller USB AVRs) or 8KB (for the larger USB AVRs).
|
|
*
|
|
* If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation.
|
|
* Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible)
|
|
* alternative exists called "dfu-programmer".
|
|
*/
|