You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Host/LowLevel/PrinterHost/PrinterHost.c

238 lines
7.0 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/*
USB Printer host demo application.
** NOT CURRENTLY FUNCTIONAL - DO NOT USE **
*/
#include "PrinterHost.h"
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE));
for (;;)
{
USB_Printer_Host();
USB_USBTask();
}
}
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
void EVENT_USB_HostError(uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
void EVENT_USB_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- In State %d\r\n" ESC_FG_WHITE), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
void USB_Printer_Host(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
/* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface
* request to switch to the interface alternate setting with the Bidirectional protocol */
if (PrinterAltSetting)
{
USB_ControlRequest = (USB_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE),
bRequest: REQ_SetInterface,
wValue: PrinterAltSetting,
wIndex: PrinterInterfaceNumber,
wLength: 0,
};
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Retrieving Device ID...\r\n"));
char DeviceIDString[256];
if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR(ESC_FG_RED "Control Error (Get DeviceID).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf_P(PSTR("Printer Device ID: %s\r\n"), DeviceIDString);
puts_P(PSTR("Printer Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* Indicate device busy via the status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
Printer_Data_t TestPageData =
{
// "\033%-12345X\033E LUFA PCL Test Page \033E\033%-12345X",
"\033@\033i\001\033X\001\060\000\r\nLUFA ESCP/2 Test Page\r\n",
(sizeof(TestPageData.Data) - 1)
};
printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageData.Length);
if ((ErrorCode = Printer_SendData(&TestPageData)) != PIPE_RWSTREAM_NoError)
{
puts_P(PSTR(ESC_FG_RED "Error Sending Test Page.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("Test Page Sent.\r\n"));
/* Indicate device no longer busy */
LEDs_SetAllLEDs(LEDMASK_USB_READY);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
}