qmk_firmware/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c

/*
             LUFA Library
     Copyright (C) Dean Camera, 2010.

  dean [at] fourwalledcubicle [dot] com
           www.lufa-lib.org
*/

/*
  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

  Permission to use, copy, modify, distribute, and sell this
  software and its documentation for any purpose is hereby granted
  without fee, provided that the above copyright notice appear in
  all copies and that both that the copyright notice and this
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

#include "ConfigDescriptor.h"

/** Interface number for the bidirectional Printer interface found within the device. */
uint8_t PrinterInterfaceNumber;

/** Interface Alternate Setting number for the bidirectional Printer interface found within the device. */
uint8_t PrinterAltSetting;

/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
 *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
 *  with compatible devices.
 *
 *  This routine searches for a bidirectional Printer interface descriptor containing bulk IN and OUT data endpoints.
 *
 *  \return An error code from the \ref PrinterHost_GetConfigDescriptorDataCodes_t enum.
 */
uint8_t ProcessConfigurationDescriptor(void)
{
	uint8_t  ConfigDescriptorData[512];
	void*    CurrConfigLocation = ConfigDescriptorData;
	uint16_t CurrConfigBytesRem;

	USB_Descriptor_Interface_t* PrinterInterface = NULL;
	USB_Descriptor_Endpoint_t*  DataINEndpoint   = NULL;
	USB_Descriptor_Endpoint_t*  DataOUTEndpoint  = NULL;

	/* Retrieve the entire configuration descriptor into the allocated buffer */
	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
	{
		case HOST_GETCONFIG_Successful:
			break;
		case HOST_GETCONFIG_InvalidData:
			return InvalidConfigDataReturned;
		case HOST_GETCONFIG_BuffOverflow:
			return DescriptorTooLarge;
		default:
			return ControlError;
	}

	while (!(DataINEndpoint) || !(DataOUTEndpoint))
	{
		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
		if (!(PrinterInterface) ||
		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
		                              DComp_NextPrinterInterfaceBulkDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
		{
			/* Get the next Printer interface from the configuration descriptor */
			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
										  DComp_NextBidirectionalPrinterInterface) != DESCRIPTOR_SEARCH_COMP_Found)
			{
				/* Descriptor not found, error out */
				return NoCompatibleInterfaceFound;
			}

			/* Save the interface in case we need to refer back to it later */
			PrinterInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);

			/* Clear any found endpoints */
			DataINEndpoint  = NULL;
			DataOUTEndpoint = NULL;

			/* Skip the remainder of the loop as we have not found an endpoint yet */
			continue;
		}

		/* Retrieve the endpoint address from the endpoint descriptor */
		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);

		/* If the endpoint is a IN type endpoint */
		if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
		  DataINEndpoint  = EndpointData;
		else
		  DataOUTEndpoint = EndpointData;
	}

	/* Save Printer interface details for later use */
	PrinterInterfaceNumber = PrinterInterface->InterfaceNumber;
	PrinterAltSetting      = PrinterInterface->AlternateSetting;

	/* Configure the Printer data IN pipe */
	Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);

	/* Configure the Printer data OUT pipe */
	Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);

	/* Valid data found, return success */
	return SuccessfulConfigRead;
}

/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
 *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
 *  descriptor processing if an incompatible descriptor configuration is found.
 *
 *  This comparator searches for the next Bidirectional Printer Interface descriptor of the current Printer interface,
 *  aborting the search if the end of the descriptors is found.
 *
 *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
 */
uint8_t DComp_NextBidirectionalPrinterInterface(void* CurrentDescriptor)
{
	if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
	{
		/* Check the descriptor class, subclass and protocol, break out if correct value interface found */
		if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class    == PRNT_CSCP_PrinterClass)    &&
		    (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == PRNT_CSCP_PrinterSubclass) &&
			(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == PRNT_CSCP_BidirectionalProtocol))
		{
			return DESCRIPTOR_SEARCH_Found;
		}
	}

	return DESCRIPTOR_SEARCH_NotFound;
}

/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
 *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
 *  descriptor processing if an incompatible descriptor configuration is found.
 *
 *  This comparator searches for the next Bulk Endpoint descriptor of the current Printer interface, aborting the
 *  search if another interface descriptor is found before the next endpoint.
 *
 *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
 */
uint8_t DComp_NextPrinterInterfaceBulkDataEndpoint(void* CurrentDescriptor)
{
	if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)
	{
		uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor,
		                                        USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK);

		/* Check the endpoint type, break out if correct BULK type endpoint found */
		if (EndpointType == EP_TYPE_BULK)
		  return DESCRIPTOR_SEARCH_Found;
	}
	else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
	{
		return DESCRIPTOR_SEARCH_Fail;
	}

	return DESCRIPTOR_SEARCH_NotFound;
}