You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
285 lines
8.5 KiB
285 lines
8.5 KiB
/*
|
|
LUFA Library
|
|
Copyright (C) Dean Camera, 2009.
|
|
|
|
dean [at] fourwalledcubicle [dot] com
|
|
www.fourwalledcubicle.com
|
|
*/
|
|
|
|
/*
|
|
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
|
|
|
Permission to use, copy, modify, and distribute this software
|
|
and its documentation for any purpose and without fee is hereby
|
|
granted, provided that the above copyright notice appear in all
|
|
copies and that both that the copyright notice and this
|
|
permission notice and warranty disclaimer appear in supporting
|
|
documentation, and that the name of the author not be used in
|
|
advertising or publicity pertaining to distribution of the
|
|
software without specific, written prior permission.
|
|
|
|
The author disclaim all warranties with regard to this
|
|
software, including all implied warranties of merchantability
|
|
and fitness. In no event shall the author be liable for any
|
|
special, indirect or consequential damages or any damages
|
|
whatsoever resulting from loss of use, data or profits, whether
|
|
in an action of contract, negligence or other tortious action,
|
|
arising out of or in connection with the use or performance of
|
|
this software.
|
|
*/
|
|
|
|
#if defined(ENABLE_PDI_PROTOCOL) || defined(__DOXYGEN__)
|
|
|
|
#warning PDI Programming Protocol support is incomplete and not currently suitable for use.
|
|
|
|
/** \file
|
|
*
|
|
* PDI Protocol handler, to process V2 Protocol wrapped PDI commands used in Atmel programmer devices.
|
|
*/
|
|
|
|
#define INCLUDE_FROM_PDIPROTOCOL_C
|
|
#include "PDIProtocol.h"
|
|
|
|
uint32_t XPROG_Param_NVMBase;
|
|
uint32_t XPROG_Param_EEPageSize;
|
|
|
|
/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI
|
|
* XMEGA programming (either PDI or JTAG). Only PDI programming is supported.
|
|
*/
|
|
void PDIProtocol_XPROG_SetMode(void)
|
|
{
|
|
struct
|
|
{
|
|
uint8_t Protocol;
|
|
} SetMode_XPROG_Params;
|
|
|
|
Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params));
|
|
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG_SETMODE);
|
|
Endpoint_Write_Byte(SetMode_XPROG_Params.Protocol ? STATUS_CMD_FAILED : STATUS_CMD_OK);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
|
|
* removed and processed so that the underlying XPROG command can be handled.
|
|
*/
|
|
void PDIProtocol_XPROG_Command(void)
|
|
{
|
|
uint8_t XPROGCommand = Endpoint_Read_Byte();
|
|
|
|
switch (XPROGCommand)
|
|
{
|
|
case XPRG_CMD_ENTER_PROGMODE:
|
|
PDIProtocol_EnterXPROGMode();
|
|
break;
|
|
case XPRG_CMD_LEAVE_PROGMODE:
|
|
PDIProtocol_LeaveXPROGMode();
|
|
break;
|
|
case XPRG_CMD_ERASE:
|
|
PDIProtocol_Erase();
|
|
break;
|
|
case XPRG_CMD_WRITE_MEM:
|
|
PDIProtocol_WriteMemory();
|
|
break;
|
|
case XPRG_CMD_READ_MEM:
|
|
PDIProtocol_ReadMemory();
|
|
break;
|
|
case XPRG_CMD_CRC:
|
|
PDIProtocol_ReadCRC();
|
|
break;
|
|
case XPRG_CMD_SET_PARAM:
|
|
PDIProtocol_SetParam();
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** Handler for the XPROG ENTER_PROGMODE command to establish a PDI connection with the attached device. */
|
|
static void PDIProtocol_EnterXPROGMode(void)
|
|
{
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
/* Enable PDI programming mode with the attached target */
|
|
PDITarget_EnableTargetPDI();
|
|
|
|
/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
|
|
PDITarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
|
|
PDITarget_SendByte(PDI_RESET_KEY);
|
|
|
|
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
|
|
PDITarget_SendByte(PDI_CMD_KEY);
|
|
for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
|
|
PDITarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
|
|
|
|
/* Wait until the NVM bus becomes active */
|
|
bool NVMBusEnabled = PDITarget_WaitWhileNVMBusBusy();
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
|
|
Endpoint_Write_Byte(NVMBusEnabled ? XPRG_ERR_OK : XPRG_ERR_FAILED);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
|
|
* the attached device.
|
|
*/
|
|
static void PDIProtocol_LeaveXPROGMode(void)
|
|
{
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
/* Clear the RESET key into the RESET PDI register to allow the XMEGA to run */
|
|
PDITarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
|
|
PDITarget_SendByte(0x00);
|
|
|
|
PDITarget_DisableTargetPDI();
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
|
|
Endpoint_Write_Byte(XPRG_ERR_OK);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
|
|
static void PDIProtocol_Erase(void)
|
|
{
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
struct
|
|
{
|
|
uint8_t MemoryType;
|
|
uint32_t Address;
|
|
} Erase_XPROG_Params;
|
|
|
|
Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params));
|
|
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
// TODO: Send erase command here via PDI protocol
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
Endpoint_Write_Byte(XPRG_CMD_ERASE);
|
|
Endpoint_Write_Byte(ReturnStatus);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
|
|
static void PDIProtocol_WriteMemory(void)
|
|
{
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
struct
|
|
{
|
|
uint8_t MemoryType;
|
|
uint32_t Address;
|
|
uint16_t Length;
|
|
uint8_t ProgData[256];
|
|
} WriteMemory_XPROG_Params;
|
|
|
|
Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
|
|
sizeof(WriteMemory_XPROG_Params).ProgData));
|
|
WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
|
|
WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length);
|
|
Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length);
|
|
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
// TODO: Send program command here via PDI protocol
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
|
|
Endpoint_Write_Byte(ReturnStatus);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
|
|
* attached device.
|
|
*/
|
|
static void PDIProtocol_ReadMemory(void)
|
|
{
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
struct
|
|
{
|
|
uint8_t MemoryType;
|
|
uint32_t Address;
|
|
uint16_t Length;
|
|
} ReadMemory_XPROG_Params;
|
|
|
|
Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params));
|
|
ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
|
|
ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length);
|
|
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
// TODO: Send read command here via PDI protocol
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
|
|
Endpoint_Write_Byte(ReturnStatus);
|
|
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
|
|
* attached device's memory and a data set on the host.
|
|
*/
|
|
static void PDIProtocol_ReadCRC(void)
|
|
{
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
uint8_t CRCType = Endpoint_Read_Byte();
|
|
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
uint32_t MemoryCRC = 0;
|
|
|
|
// TODO: Read device CRC for desired memory via PDI protocol
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
Endpoint_Write_Byte(XPRG_CMD_CRC);
|
|
Endpoint_Write_Byte(ReturnStatus);
|
|
|
|
if (ReturnStatus == XPRG_ERR_OK)
|
|
{
|
|
Endpoint_Write_Byte(MemoryCRC >> 16);
|
|
Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);
|
|
}
|
|
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
/** Handler for the XPROG SET_PARAM command to set a PDI parameter for use when communicating with the
|
|
* attached device.
|
|
*/
|
|
static void PDIProtocol_SetParam(void)
|
|
{
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
uint8_t XPROGParam = Endpoint_Read_Byte();
|
|
|
|
if (XPROGParam == XPRG_PARAM_NVMBASE)
|
|
XPROG_Param_NVMBase = Endpoint_Read_DWord_LE();
|
|
else if (XPROGParam == XPRG_PARAM_EEPPAGESIZE)
|
|
XPROG_Param_EEPageSize = Endpoint_Read_Word_LE();
|
|
else
|
|
ReturnStatus = XPRG_ERR_FAILED;
|
|
|
|
Endpoint_ClearOUT();
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
Endpoint_Write_Byte(XPRG_CMD_SET_PARAM);
|
|
Endpoint_Write_Byte(ReturnStatus);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
#endif
|