You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/handwired/dactyl
fauxpark 9e4ac6cf29
Migrate fn_actions for default keymaps (#4935)
6 years ago
..
keymaps Migrate fn_actions for default keymaps (#4935) 6 years ago
config.h Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955) 6 years ago
dactyl.c Bring dactyl/matrix.c in line with quantum/matrix.c (#2613) 7 years ago
dactyl.h Handwired/Dactyl refactor and Configurator support (#3222) 7 years ago
i2cmaster.h Handwired/Dactyl keyboard (#2058) 7 years ago
info.json Handwired/Dactyl refactor and Configurator support (#3222) 7 years ago
matrix.c Keyboard: Dactyl - Only initialize relevant variables (#3771) 6 years ago
readme.md Fix build instructions in the Dactyl readme 7 years ago
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 7 years ago
twimaster.c Handwired/Dactyl keyboard (#2058) 7 years ago

readme.md

Dactyl

See https://github.com/adereth/dactyl-keyboard

The Dactyl uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make handwired/dactyl:<keymapname>, for example make handwired/dactyl:default

  • This will result in a hex file called handwired_dactyl_<keymapname>.hex, e.g. handwired_dactyl_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Put the Teensy in firmware-loading mode:

    • If your current layout has a RESET key, press it.
    • If you lack a RESET key, press the reset button on the Teensy board itself.
  • Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

  • Build the firmware as above

  • Run <path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymapname>.hex

  • If you like, you can do both at once: make handwired/dactyl:<keymapname>:teensy

  • Put the Teensy in firmware-loading mode:

    • If your current layout has a RESET key, press it.
    • If you lack a RESET key, press the reset button on the Teensy board itself.