You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h

96 lines
3.6 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#ifndef _BLUETOOTH_HOST_H_
#define _BLUETOOTH_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/power.h>
#include <stdio.h>
#include "BluetoothStack.h"
#include "DeviceDescriptor.h"
#include "ConfigDescriptor.h"
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
#define BLUETOOTH_DATA_IN_PIPE 1
#define BLUETOOTH_DATA_OUT_PIPE 2
#define BLUETOOTH_EVENTS_PIPE 3
/* Task Definitions: */
void Bluetooth_Management_Task(void);
/* Enums: */
/** Enum for the possible status codes for passing to the UpdateStatus() function. */
enum MouseHostViaInt_StatusCodes_t
{
Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
Status_USBEnumerating = 1, /**< USB interface is enumerating */
Status_USBReady = 2, /**< USB interface is connected and ready */
Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
Status_BluetoothConnected = 5, /**< Bluetooth stack connected to device and idle */
Status_BluetoothBusy = 6, /**< Bluetooth stack busy */
};
/* Event Handlers: */
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationComplete(void);
void EVENT_USB_HostError(uint8_t ErrorCode);
void EVENT_USB_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode);
/* Function Prototypes: */
void SetupHardware(void);
#endif