You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/LUFA/Drivers/USB/LowLevel/USBInterrupt.c

270 lines
6.4 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#define __INCLUDE_FROM_USB_DRIVER
#include "USBInterrupt.h"
void USB_INT_DisableAllInterrupts(void)
{
#if defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
USBCON &= ~((1 << VBUSTE) | (1 << IDTE));
#elif defined(USB_SERIES_4_AVR)
USBCON &= ~(1 << VBUSTE);
#endif
#if defined(USB_CAN_BE_BOTH)
OTGIEN = 0;
#endif
#if defined(USB_CAN_BE_HOST)
UHIEN = 0;
#endif
#if defined(USB_CAN_BE_DEVICE)
UDIEN = 0;
#endif
}
void USB_INT_ClearAllInterrupts(void)
{
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
USBINT = 0;
#endif
#if defined(USB_CAN_BE_BOTH)
OTGINT = 0;
#endif
#if defined(USB_CAN_BE_HOST)
UHINT = 0;
#endif
#if defined(USB_CAN_BE_DEVICE)
UDINT = 0;
#endif
}
ISR(USB_GEN_vect, ISR_BLOCK)
{
#if defined(USB_CAN_BE_DEVICE)
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
if (USB_INT_HasOccurred(USB_INT_VBUS) && USB_INT_IsEnabled(USB_INT_VBUS))
{
USB_INT_Clear(USB_INT_VBUS);
if (USB_VBUS_GetStatus())
{
USB_DeviceState = DEVICE_STATE_Powered;
EVENT_USB_Device_Connect();
}
else
{
USB_DeviceState = DEVICE_STATE_Unattached;
EVENT_USB_Device_Disconnect();
}
}
#endif
if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI))
{
USB_INT_Clear(USB_INT_SUSPI);
USB_INT_Disable(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_WAKEUPI);
USB_CLK_Freeze();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
USB_DeviceState = DEVICE_STATE_Unattached;
EVENT_USB_Device_Disconnect();
#else
USB_DeviceState = DEVICE_STATE_Suspended;
EVENT_USB_Device_Suspend();
#endif
}
if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI))
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_CLK_Unfreeze();
USB_INT_Clear(USB_INT_WAKEUPI);
USB_INT_Disable(USB_INT_WAKEUPI);
USB_INT_Enable(USB_INT_SUSPI);
if (USB_ConfigurationNumber)
USB_DeviceState = DEVICE_STATE_Configured;
else
USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;
#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
EVENT_USB_Device_Connect();
#else
EVENT_USB_Device_WakeUp();
#endif
}
if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
{
USB_INT_Clear(USB_INT_EORSTI);
USB_DeviceState = DEVICE_STATE_Default;
USB_ConfigurationNumber = 0;
USB_INT_Clear(USB_INT_SUSPI);
USB_INT_Disable(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_WAKEUPI);
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_ControlEndpointSize,
ENDPOINT_BANK_SINGLE);
#if defined(INTERRUPT_CONTROL_ENDPOINT)
USB_INT_Enable(USB_INT_RXSTPI);
#endif
EVENT_USB_Device_Reset();
}
#if !defined(NO_SOF_EVENTS)
if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI))
{
USB_INT_Clear(USB_INT_SOFI);
EVENT_USB_Device_StartOfFrame();
}
#endif
#endif
#if defined(USB_CAN_BE_HOST)
if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
{
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Disable(USB_INT_DDISCI);
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
{
USB_INT_Clear(USB_INT_VBERRI);
USB_Host_VBUS_Manual_Off();
USB_Host_VBUS_Auto_Off();
EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip);
EVENT_USB_Host_DeviceUnattached();
USB_HostState = HOST_STATE_Unattached;
}
if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI))
{
USB_INT_Clear(USB_INT_SRPI);
USB_INT_Disable(USB_INT_SRPI);
EVENT_USB_Host_DeviceAttached();
USB_INT_Enable(USB_INT_DDISCI);
USB_HostState = HOST_STATE_Powered;
}
if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
{
USB_INT_Clear(USB_INT_BCERRI);
EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0);
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
#if !defined(NO_SOF_EVENTS)
if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
EVENT_USB_Host_StartOfFrame();
}
#endif
#endif
#if defined(USB_CAN_BE_BOTH)
if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
{
USB_INT_Clear(USB_INT_IDTI);
if (USB_DeviceState != DEVICE_STATE_Unattached)
EVENT_USB_Device_Disconnect();
if (USB_HostState != HOST_STATE_Unattached)
EVENT_USB_Host_DeviceUnattached();
USB_CurrentMode = USB_GetUSBModeFromUID();
USB_ResetInterface();
EVENT_USB_UIDChange();
}
#endif
}
#if defined(INTERRUPT_CONTROL_ENDPOINT) && defined(USB_CAN_BE_DEVICE)
ISR(USB_COM_vect, ISR_BLOCK)
{
uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
USB_INT_Disable(USB_INT_RXSTPI);
NONATOMIC_BLOCK(NONATOMIC_FORCEOFF)
{
USB_Device_ProcessControlRequest();
}
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
USB_INT_Enable(USB_INT_RXSTPI);
Endpoint_SelectEndpoint(PrevSelectedEndpoint);
}
#endif