forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '46e7fb2d3c'
${ noResults }
qmk_firmware/protocol/lufa/lufa.c

966 lines
26 KiB
Raw Blame History

/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
*/
/*
LUFA Library
Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "report.h"
#include "host.h"
#include "host_driver.h"
#include "keyboard.h"
#include "action.h"
#include "led.h"
#include "sendchar.h"
#include "debug.h"
#ifdef SLEEP_LED_ENABLE
#include "sleep_led.h"
#endif
#include "suspend.h"
#include "descriptor.h"
#include "lufa.h"
#ifdef MIDI_ENABLE
#include <beeps.h>
#endif
#ifdef BLUETOOTH_ENABLE
#include "bluetooth.h"
#endif
// #include <LUFA/Version.h>
// #include <LUFA/Drivers/USB/USB.h>
uint8_t keyboard_idle = 0;
uint8_t keyboard_protocol = 1;
static uint8_t keyboard_led_stats = 0;
static report_keyboard_t keyboard_report_sent;
/* Host driver */
static uint8_t keyboard_leds(void);
static void send_keyboard(report_keyboard_t *report);
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
#ifdef MIDI_ENABLE
void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
void usb_get_midi(MidiDevice * device);
void midi_usb_init(MidiDevice * device);
#endif
host_driver_t lufa_driver = {
keyboard_leds,
send_keyboard,
send_mouse,
send_system,
send_consumer,
#ifdef MIDI_ENABLE
usb_send_func,
usb_get_midi,
midi_usb_init,
#endif
};
void SetupHardware(void);
#ifdef MIDI_ENABLE
USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
{
.Config =
{
.StreamingInterfaceNumber = AS_INTERFACE,
.DataINEndpoint =
{
.Address = MIDI_STREAM_IN_EPADDR,
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1,
},
.DataOUTEndpoint =
{
.Address = MIDI_STREAM_OUT_EPADDR,
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1,
},
},
};
#define SYSEX_START_OR_CONT 0x40
#define SYSEX_ENDS_IN_1 0x50
#define SYSEX_ENDS_IN_2 0x60
#define SYSEX_ENDS_IN_3 0x70
#define SYS_COMMON_1 0x50
#define SYS_COMMON_2 0x20
#define SYS_COMMON_3 0x30
#endif
/*******************************************************************************
* Console
******************************************************************************/
#ifdef CONSOLE_ENABLE
static void Console_Task(void)
{
/* Device must be connected and configured for the task to run */
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
uint8_t ep = Endpoint_GetCurrentEndpoint();
#if 0
// TODO: impl receivechar()/recvchar()
Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
/* Check to see if a packet has been sent from the host */
if (Endpoint_IsOUTReceived())
{
/* Check to see if the packet contains data */
if (Endpoint_IsReadWriteAllowed())
{
/* Create a temporary buffer to hold the read in report from the host */
uint8_t ConsoleData[CONSOLE_EPSIZE];
/* Read Console Report Data */
Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
/* Process Console Report Data */
//ProcessConsoleHIDReport(ConsoleData);
}
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearOUT();
}
#endif
/* IN packet */
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
Endpoint_SelectEndpoint(ep);
return;
}
// fill empty bank
while (Endpoint_IsReadWriteAllowed())
Endpoint_Write_8(0);
// flash senchar packet
if (Endpoint_IsINReady()) {
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
#else
static void Console_Task(void)
{
}
#endif
/*******************************************************************************
* USB Events
******************************************************************************/
/*
* Event Order of Plug in:
* 0) EVENT_USB_Device_Connect
* 1) EVENT_USB_Device_Suspend
* 2) EVENT_USB_Device_Reset
* 3) EVENT_USB_Device_Wake
*/
void EVENT_USB_Device_Connect(void)
{
print("[C]");
/* For battery powered device */
if (!USB_IsInitialized) {
USB_Disable();
USB_Init();
USB_Device_EnableSOFEvents();
}
}
void EVENT_USB_Device_Disconnect(void)
{
print("[D]");
/* For battery powered device */
USB_IsInitialized = false;
/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
if (USB_IsInitialized) {
USB_Disable(); // Disable all interrupts
USB_Controller_Enable();
USB_INT_Enable(USB_INT_VBUSTI);
}
*/
}
void EVENT_USB_Device_Reset(void)
{
print("[R]");
}
void EVENT_USB_Device_Suspend()
{
print("[S]");
matrix_power_down();
#ifdef SLEEP_LED_ENABLE
sleep_led_enable();
#endif
}
void EVENT_USB_Device_WakeUp()
{
print("[W]");
suspend_wakeup_init();
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
// NOTE: converters may not accept this
led_set(host_keyboard_leds());
#endif
}
void EVENT_USB_Device_StartOfFrame(void)
{
Console_Task();
}
/** Event handler for the USB_ConfigurationChanged event.
* This is fired when the host sets the current configuration of the USB device after enumeration.
*/
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
/* Setup Keyboard HID Report Endpoints */
ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
#ifdef MOUSE_ENABLE
/* Setup Mouse HID Report Endpoint */
ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
#ifdef EXTRAKEY_ENABLE
/* Setup Extra HID Report Endpoint */
ConfigSuccess &= ENDPOINT_CONFIG(EXTRAKEY_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
#ifdef CONSOLE_ENABLE
/* Setup Console HID Report Endpoints */
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
CONSOLE_EPSIZE, ENDPOINT_BANK_DOUBLE);
#if 0
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
#endif
#ifdef NKRO_ENABLE
/* Setup NKRO HID Report Endpoints */
ConfigSuccess &= ENDPOINT_CONFIG(NKRO_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
NKRO_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
#ifdef MIDI_ENABLE
ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
// ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&USB_MIDI_Interface);
#endif
}
/*
Appendix G: HID Request Support Requirements
The following table enumerates the requests that need to be supported by various types of HID class devices.
Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol
------------------------------------------------------------------------------------------
Boot Mouse Required Optional Optional Optional Required Required
Non-Boot Mouse Required Optional Optional Optional Optional Optional
Boot Keyboard Required Optional Required Required Required Required
Non-Boot Keybrd Required Optional Required Required Optional Optional
Other Device Required Optional Optional Optional Optional Optional
*/
/** Event handler for the USB_ControlRequest event.
* This is fired before passing along unhandled control requests to the library for processing internally.
*/
void EVENT_USB_Device_ControlRequest(void)
{
uint8_t* ReportData = NULL;
uint8_t ReportSize = 0;
// MIDI_Device_ProcessControlRequest(&USB_MIDI_Interface);
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest)
{
case HID_REQ_GetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
// TODO: test/check
ReportData = (uint8_t*)&keyboard_report_sent;
ReportSize = sizeof(keyboard_report_sent);
break;
}
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
Endpoint_ClearOUT();
}
break;
case HID_REQ_SetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
#ifdef NKRO_ENABLE
case NKRO_INTERFACE:
#endif
Endpoint_ClearSETUP();
while (!(Endpoint_IsOUTReceived())) {
if (USB_DeviceState == DEVICE_STATE_Unattached)
return;
}
keyboard_led_stats = Endpoint_Read_8();
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
break;
}
}
break;
case HID_REQ_GetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
Endpoint_Write_8(keyboard_protocol);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
}
break;
case HID_REQ_SetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
keyboard_protocol = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
#ifdef NKRO_ENABLE
keyboard_nkro = !!keyboard_protocol;
#endif
clear_keyboard();
}
}
break;
case HID_REQ_SetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
}
break;
case HID_REQ_GetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
Endpoint_Write_8(keyboard_idle);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
break;
}
}
/*******************************************************************************
* Host driver
******************************************************************************/
static uint8_t keyboard_leds(void)
{
return keyboard_led_stats;
}
static void send_keyboard(report_keyboard_t *report)
{
#ifdef BLUETOOTH_ENABLE
bluefruit_serial_send(0xFD);
for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
bluefruit_serial_send(report->raw[i]);
}
#endif
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
/* Select the Keyboard Report Endpoint */
#ifdef NKRO_ENABLE
if (keyboard_nkro) {
/* Report protocol - NKRO */
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
/* Check if write ready for a polling interval around 1ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Keyboard Report Data */
Endpoint_Write_Stream_LE(report, NKRO_EPSIZE, NULL);
}
else
#endif
{
/* Boot protocol */
Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Keyboard Report Data */
Endpoint_Write_Stream_LE(report, KEYBOARD_EPSIZE, NULL);
}
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
keyboard_report_sent = *report;
}
static void send_mouse(report_mouse_t *report)
{
#ifdef MOUSE_ENABLE
#ifdef BLUETOOTH_ENABLE
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x03);
bluefruit_serial_send(report->buttons);
bluefruit_serial_send(report->x);
bluefruit_serial_send(report->y);
bluefruit_serial_send(report->v); // should try sending the wheel v here
bluefruit_serial_send(report->h); // should try sending the wheel h here
bluefruit_serial_send(0x00);
#endif
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
/* Select the Mouse Report Endpoint */
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Mouse Report Data */
Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
#endif
}
static void send_system(uint16_t data)
{
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
report_extra_t r = {
.report_id = REPORT_ID_SYSTEM,
.usage = data
};
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}
static void send_consumer(uint16_t data)
{
#ifdef BLUETOOTH_ENABLE
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x02);
bluefruit_serial_send((bitmap>>8)&0xFF);
bluefruit_serial_send(bitmap&0xFF);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
#endif
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
report_extra_t r = {
.report_id = REPORT_ID_CONSUMER,
.usage = data
};
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}
/*******************************************************************************
* sendchar
******************************************************************************/
#ifdef CONSOLE_ENABLE
#define SEND_TIMEOUT 5
int8_t sendchar(uint8_t c)
{
// Not wait once timeouted.
// Because sendchar() is called so many times, waiting each call causes big lag.
static bool timeouted = false;
if (USB_DeviceState != DEVICE_STATE_Configured)
return -1;
uint8_t ep = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
goto ERROR_EXIT;
}
if (timeouted && !Endpoint_IsReadWriteAllowed()) {
goto ERROR_EXIT;
}
timeouted = false;
uint8_t timeout = SEND_TIMEOUT;
while (!Endpoint_IsReadWriteAllowed()) {
if (USB_DeviceState != DEVICE_STATE_Configured) {
goto ERROR_EXIT;
}
if (Endpoint_IsStalled()) {
goto ERROR_EXIT;
}
if (!(timeout--)) {
timeouted = true;
goto ERROR_EXIT;
}
_delay_ms(1);
}
Endpoint_Write_8(c);
// send when bank is full
if (!Endpoint_IsReadWriteAllowed())
Endpoint_ClearIN();
Endpoint_SelectEndpoint(ep);
return 0;
ERROR_EXIT:
Endpoint_SelectEndpoint(ep);
return -1;
}
#else
int8_t sendchar(uint8_t c)
{
return 0;
}
#endif
#ifdef MIDI_ENABLE
void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) {
MIDI_EventPacket_t event;
event.Data1 = byte0;
event.Data2 = byte1;
event.Data3 = byte2;
uint8_t cable = 0;
// Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);
//if the length is undefined we assume it is a SYSEX message
if (midi_packet_length(byte0) == UNDEFINED) {
switch(cnt) {
case 3:
if (byte2 == SYSEX_END)
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_3);
else
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
break;
case 2:
if (byte1 == SYSEX_END)
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_2);
else
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
break;
case 1:
if (byte0 == SYSEX_END)
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_1);
else
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
break;
default:
return; //invalid cnt
}
} else {
//deal with 'system common' messages
//TODO are there any more?
switch(byte0 & 0xF0){
case MIDI_SONGPOSITION:
event.Event = MIDI_EVENT(cable, SYS_COMMON_3);
break;
case MIDI_SONGSELECT:
case MIDI_TC_QUARTERFRAME:
event.Event = MIDI_EVENT(cable, SYS_COMMON_2);
break;
default:
event.Event = MIDI_EVENT(cable, byte0);
break;
}
}
// Endpoint_Write_Stream_LE(&event, sizeof(event), NULL);
// Endpoint_ClearIN();
MIDI_Device_SendEventPacket(&USB_MIDI_Interface, &event);
MIDI_Device_Flush(&USB_MIDI_Interface);
MIDI_Device_USBTask(&USB_MIDI_Interface);
USB_USBTask();
}
void usb_get_midi(MidiDevice * device) {
MIDI_EventPacket_t event;
while (MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, &event)) {
midi_packet_length_t length = midi_packet_length(event.Data1);
uint8_t input[3];
input[0] = event.Data1;
input[1] = event.Data2;
input[2] = event.Data3;
if (length == UNDEFINED) {
//sysex
if (event.Event == MIDI_EVENT(0, SYSEX_START_OR_CONT) || event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_3)) {
length = 3;
} else if (event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_2)) {
length = 2;
} else if(event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_1)) {
length = 1;
} else {
//XXX what to do?
}
}
//pass the data to the device input function
if (length != UNDEFINED)
midi_device_input(device, length, input);
}
MIDI_Device_USBTask(&USB_MIDI_Interface);
USB_USBTask();
}
void midi_usb_init(MidiDevice * device){
midi_device_init(device);
midi_device_set_send_func(device, usb_send_func);
midi_device_set_pre_input_process_func(device, usb_get_midi);
SetupHardware();
sei();
}
void MIDI_Task(void)
{
/* Device must be connected and configured for the task to run */
dprint("in MIDI_TASK\n");
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
dprint("continuing in MIDI_TASK\n");
Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR);
if (Endpoint_IsINReady())
{
dprint("Endpoint is ready\n");
uint8_t MIDICommand = 0;
uint8_t MIDIPitch;
/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
uint8_t Channel = MIDI_CHANNEL(1);
MIDICommand = MIDI_COMMAND_NOTE_ON;
MIDIPitch = 0x3E;
/* Check if a MIDI command is to be sent */
if (MIDICommand)
{
dprint("Command exists\n");
MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
{
.Event = MIDI_EVENT(0, MIDICommand),
.Data1 = MIDICommand | Channel,
.Data2 = MIDIPitch,
.Data3 = MIDI_STANDARD_VELOCITY,
};
/* Write the MIDI event packet to the endpoint */
Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
/* Send the data in the endpoint to the host */
Endpoint_ClearIN();
}
}
/* Select the MIDI OUT stream */
Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR);
/* Check if a MIDI command has been received */
if (Endpoint_IsOUTReceived())
{
MIDI_EventPacket_t MIDIEvent;
/* Read the MIDI event packet from the endpoint */
Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
/* If the endpoint is now empty, clear the bank */
if (!(Endpoint_BytesInEndpoint()))
{
/* Clear the endpoint ready for new packet */
Endpoint_ClearOUT();
}
}
}
#endif
/*******************************************************************************
* main
******************************************************************************/
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
// Leonardo needs. Without this USB device is not recognized.
USB_Disable();
USB_Init();
// for Console_Task
USB_Device_EnableSOFEvents();
print_set_sendchar(sendchar);
}
#ifdef MIDI_ENABLE
void fallthrough_callback(MidiDevice * device,
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
void cc_callback(MidiDevice * device,
uint8_t chan, uint8_t num, uint8_t val);
void sysex_callback(MidiDevice * device,
uint16_t start, uint8_t length, uint8_t * data);
#endif
int main(void) __attribute__ ((weak));
int main(void)
{
//setup the device
#ifdef MIDI_ENABLE
midi_device_init(&midi_device);
midi_device_set_send_func(&midi_device, usb_send_func);
midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
#endif
SetupHardware();
sei();
#ifdef MIDI_ENABLE
midi_register_fallthrough_callback(&midi_device, fallthrough_callback);
midi_register_cc_callback(&midi_device, cc_callback);
midi_register_sysex_callback(&midi_device, sysex_callback);
init_notes();
// midi_send_cc(&midi_device, 0, 1, 2);
// midi_send_cc(&midi_device, 15, 1, 0);
// midi_send_noteon(&midi_device, 0, 64, 127);
// midi_send_noteoff(&midi_device, 0, 64, 127);
#endif
#ifdef BLUETOOTH_ENABLE
serial_init();
#endif
/* wait for USB startup & debug output */
// while (USB_DeviceState != DEVICE_STATE_Configured) {
// #if defined(INTERRUPT_CONTROL_ENDPOINT)
// ;
// #else
USB_USBTask();
// #endif
// }
print("USB configured.\n");
/* init modules */
keyboard_init();
host_set_driver(&lufa_driver);
#ifdef SLEEP_LED_ENABLE
sleep_led_init();
#endif
print("Keyboard start.\n");
while (1) {
#ifndef BLUETOOTH_ENABLE
while (USB_DeviceState == DEVICE_STATE_Suspended) {
print("[s]");
suspend_power_down();
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
USB_Device_SendRemoteWakeup();
}
}
#endif
#ifdef MIDI_ENABLE
midi_device_process(&midi_device);
// MIDI_Task();
#endif
keyboard_task();
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
#endif
}
}
#ifdef MIDI_ENABLE
void fallthrough_callback(MidiDevice * device,
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2){
if (cnt == 3) {
switch (byte0 & 0xF0) {
case MIDI_NOTEON:
play_note(((double)261.6)*pow(2.0, -1.0)*pow(2.0,(byte1 & 0x7F)/12.0), (byte2 & 0x7F) / 8);
break;
case MIDI_NOTEOFF:
stop_note(((double)261.6)*pow(2.0, -1.0)*pow(2.0,(byte1 & 0x7F)/12.0));
break;
}
}
if (byte0 == MIDI_STOP) {
stop_all_notes();
}
}
void cc_callback(MidiDevice * device,
uint8_t chan, uint8_t num, uint8_t val) {
//sending it back on the next channel
midi_send_cc(device, (chan + 1) % 16, num, val);
}
void sysex_callback(MidiDevice * device,
uint16_t start, uint8_t length, uint8_t * data) {
for (int i = 0; i < length; i++)
midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i));
}
#endif
Reference in new issue View Git Blame Copy Permalink