You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/LUFA/Drivers/USB/LowLevel/LowLevel.h

377 lines
17 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main low level USB driver. This module manages the low level initialization and shut down of the USB AVR's
* USB interface in either device or (if supported) host mode.
*/
#ifndef __USBLOWLEVEL_H__
#define __USBLOWLEVEL_H__
/* Includes: */
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include "USBMode.h"
#include "../../../Common/Common.h"
#include "../HighLevel/Events.h"
#include "../HighLevel/USBTask.h"
#include "../HighLevel/USBInterrupt.h"
#if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)
#include "Host.h"
#include "Pipe.h"
#include "OTG.h"
#endif
#if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
#include "Device.h"
#include "Endpoint.h"
#include "DevChapter9.h"
#endif
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks and Defines: */
#if !defined(F_CLOCK)
#error F_CLOCK is not defined. You must device F_CLOCK to the frequency of the unprescaled input clock in your project makefile.
#define F_CLOCK 0
#endif
#if (F_CLOCK == 8000000)
#if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__))
#define USB_PLL_PSC 0
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || \
defined(__AVR_ATmega32U6__))
#define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0))
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
#define USB_PLL_PSC 0
#endif
#elif (F_CLOCK == 16000000)
#if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__))
#define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP1))
#elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__))
#define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP0))
#elif (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__))
#define USB_PLL_PSC (1 << PLLP0)
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
#define USB_PLL_PSC (1 << PINDIV)
#endif
#endif
#if !defined(USB_PLL_PSC)
#error No PLL prescale value available for chosen F_CPU value and AVR model.
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** Mode mask for the USB_CurrentMode global. This indicates that the USB interface is currently not
* initialized into any mode.
*/
#define USB_MODE_NONE 0
/** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the
* USB interface is or should be initialized in the USB device mode.
*/
#define USB_MODE_DEVICE 1
/** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the
* USB interface is or should be initialized in the USB host mode.
*
* \note Not all USB AVRs support host mode.
*/
#define USB_MODE_HOST 2
/** Mode mask for the the USB_Init() function. This indicates that the USB interface should be
* initialized into whatever mode the UID pin of the USB AVR indicates, and that the device
* should swap over its mode when the level of the UID pin changes during operation.
*
* \note Not all USB AVRs support host mode, and thus UID mode.
*/
#define USB_MODE_UID 3
/** Regulator disable option mask for USB_Init(). This indicates that the internal 3.3V USB data pad
* regulator should be enabled to regulate the data pin voltages to within the USB standard.
*
* \note See USB AVR data sheet for more information on the internal pad regulator.
*/
#define USB_OPT_REG_DISABLED (1 << 1)
/** Regulator enable option mask for USB_Init(). This indicates that the internal 3.3V USB data pad
* regulator should be disabled and the AVR's VCC level used for the data pads.
*
* \note See USB AVR data sheet for more information on the internal pad regulator.
*/
#define USB_OPT_REG_ENABLED (0 << 1)
/** Manual PLL control option mask for USB_Init(). This indicates to the library that the user application
* will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock
* that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
*/
#define USB_OPT_MANUAL_PLL (1 << 2)
/** Automatic PLL control option mask for USB_Init(). This indicates to the library that the library should
* take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock
* that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
*/
#define USB_OPT_AUTO_PLL (0 << 2)
/** Mask for a CONTROL type endpoint or pipe.
*
* \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions.
*/
#define EP_TYPE_CONTROL 0b00
/** Mask for an ISOCHRONOUS type endpoint or pipe.
*
* \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions.
*/
#define EP_TYPE_ISOCHRONOUS 0b01
/** Mask for a BULK type endpoint or pipe.
*
* \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions.
*/
#define EP_TYPE_BULK 0b10
/** Mask for an INTERRUPT type endpoint or pipe.
*
* \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions.
*/
#define EP_TYPE_INTERRUPT 0b11
/** Mask for determining the type of an endpoint or pipe. This should then be compared with the
* EP_TYPE_* macros elsewhere in this module to determine the exact type of the endpoint or pipe.
*
* \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions.
*/
#define EP_TYPE_MASK 0b11
/** Returns boolean true if the VBUS line is currently high (i.e. the USB host is supplying power),
* otherwise returns false.
*/
#define USB_VBUS_GetStatus() ((USBSTA & (1 << VBUS)) ? true : false)
/** Detaches the device from the USB bus. This has the effect of removing the device from any
* host if, ceasing USB communications. If no host is present, this prevents any host from
* enumerating the device once attached until USB_Attach() is called.
*/
#define USB_Detach() MACROS{ UDCON |= (1 << DETACH); }MACROE
/** Attaches the device to the USB bus. This announces the device's presence to any attached
* USB host, starting the enumeration process. If no host is present, attaching the device
* will allow for enumeration once a host is connected to the device.
*
* This is inexplicably also required for proper operation while in host mode, to enable the
* attachment of a device to the host. This is despite the bit being located in the device-mode
* register and despite the datasheet making no mention of its requirement in host mode.
*/
#define USB_Attach() MACROS{ UDCON &= ~(1 << DETACH); }MACROE
#if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
/** Constant for the maximum software timeout period of the USB data stream transfer functions
* (both control and standard) when in either device or host mode. If the next packet of a stream
* is not received or acknowedged within this time period, the stream function will fail.
*
* This value may be overridden in the user project makefile as the value of the
* USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch.
*/
#define USB_STREAM_TIMEOUT_MS 100
#endif
/* Function Prototypes: */
/** Main function to initialize and start the USB interface. Once active, the USB interface will
* allow for device connection to a host when in device mode, or for device enumeration while in
* host mode.
*
* As the USB library relies on USB interrupts for some of its functionality, this routine will
* enable global interrupts.
*
* Calling this function when the USB interface is already initialized will cause a complete USB
* interface reset and re-enumeration.
*
* \param Mode This is a mask indicating what mode the USB interface is to be initialized to.
* Valid mode masks are USB_MODE_DEVICE, USB_MODE_HOST or USB_MODE_UID.
*
* \param Options Mask indicating the options which should be used when initializing the USB
* interface to control the USB interface's behaviour. This should be comprised of
* a USB_OPT_REG_* mask to control the regulator, a USB_OPT_*_PLL mask to control the
* PLL, and a USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
* mode speed.
*
* \note To reduce the FLASH requirements of the library if only device or host mode is required,
* this can be statically set via defining the token USB_DEVICE_ONLY for device mode or
* USB_HOST_ONLY for host mode in the use project makefile, passing the token to the compiler
* via the -D switch. If the mode is statically set, this parameter does not exist in the
* function prototype.
*
* \note To reduce the FLASH requirements of the library if only fixed settings are are required,
* the options may be set statically in the same manner as the mode (see the Mode parameter of
* this function). To statically set the USB options, pass in the USE_STATIC_OPTIONS token,
* defined to the appropriate options masks. When the options are statically set, this
* parameter does not exist in the function prototype.
*
* \note The mode parameter does not exist on devices where only one mode is possible, such as USB
* AVR models which only implement the USB device mode in hardware.
*
* \see Device.h for the USB_DEVICE_OPT_* masks.
*/
void USB_Init(
#if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
const uint8_t Mode
#endif
#if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__)
,
#elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
void
#endif
#if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
const uint8_t Options
#endif
);
/** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO
* memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface
* is restarted with the USB_Init() function.
*/
void USB_ShutDown(void);
/** Resets the interface, when already initialized. This will re-enumerate the device if already connected
* to a host, or re-enumerate an already attached device when in host mode.
*/
void USB_ResetInterface(void);
/* Enums: */
/** Enum for error codes relating to the powering on of the USB interface. These error codes are
* used in the ErrorCode parameter value of the USB_PowerOnFail event.
*/
enum USB_PowerOnErrorCodes_t
{
POWERON_ERROR_NoUSBModeSpecified = 0, /**< Indicates that USB_Init() was called with an
* invalid or missing Mode parameter.
*/
};
/* Global Variables: */
#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__)
/** Indicates the mode that the USB interface is currently initialized to. This value will be
* one of the USB_MODE_* masks defined elsewhere in this module.
*
* \note This variable should be treated as read-only in the user application, and never manually
* changed in value.
*/
extern volatile uint8_t USB_CurrentMode;
#endif
#if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
extern volatile uint8_t USB_Options;
/** Indicates the current USB options that the USB interface was initialized with when USB_Init()
* was called. This value will be one of the USB_MODE_* masks defined elsewhere in this module.
*
* \note This variable should be treated as read-only in the user application, and never manually
* changed in value.
*/
#endif
/* Throwable Events: */
/** This module raises the USB_Disconnect event if the USB interface is reset (such as during a mode
* change while in UID mode) while the USB interface is connected to a device when in host mode, or
* a host while in device mode.
*
* \see Events.h for more information on this event.
*/
RAISES_EVENT(USB_Disconnect);
#if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
/** This module raises the Power On Failure event when an error occurs while initializing the USB
* interface.
*
* \see Events.h for more information on this event.
*/
RAISES_EVENT(USB_PowerOnFail);
#endif
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
#define USB_PLL_On() MACROS{ PLLCSR = USB_PLL_PSC; PLLCSR |= (1 << PLLE); }MACROE
#define USB_PLL_Off() MACROS{ PLLCSR = 0; }MACROE
#define USB_PLL_IsReady() ((PLLCSR & (1 << PLOCK)) ? true : false)
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
#define USB_REG_On() MACROS{ UHWCON |= (1 << UVREGE); }MACROE
#define USB_REG_Off() MACROS{ UHWCON &= ~(1 << UVREGE); }MACROE
#else
#define USB_REG_On() MACROS{ REGCR &= ~(1 << REGDIS); }MACROE
#define USB_REG_Off() MACROS{ REGCR |= (1 << REGDIS); }MACROE
#endif
#define USB_OTGPAD_On() MACROS{ USBCON |= (1 << OTGPADE); }MACROE
#define USB_OTGPAD_Off() MACROS{ USBCON &= ~(1 << OTGPADE); }MACROE
#define USB_CLK_Freeze() MACROS{ USBCON |= (1 << FRZCLK); }MACROE
#define USB_CLK_Unfreeze() MACROS{ USBCON &= ~(1 << FRZCLK); }MACROE
#define USB_Interface_Enable() MACROS{ USBCON |= (1 << USBE); }MACROE
#define USB_Interface_Disable() MACROS{ USBCON &= ~(1 << USBE); }MACROE
#define USB_Interface_Reset() MACROS{ uint8_t Temp = USBCON; USBCON = (Temp & ~(1 << USBE)); \
USBCON = (Temp | (1 << USBE)); }MACROE
/* Inline Functions: */
static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT;
static inline uint8_t USB_GetUSBModeFromUID(void)
{
#if (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__))
if (USBSTA & (1 << ID))
return USB_MODE_DEVICE;
else
return USB_MODE_HOST;
#else
return USB_MODE_DEVICE;
#endif
}
#endif
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif