You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c

299 lines
9.6 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the MassStorageHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "MassStorageHost.h"
/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
* passed to all Mass Storage Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_MS_Host_t FlashDisk_MS_Interface =
{
.Config =
{
.DataINPipeNumber = 1,
.DataINPipeDoubleBank = false,
.DataOUTPipeNumber = 2,
.DataOUTPipeDoubleBank = false,
},
};
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_FG_CYAN "Mass Storage Host Demo running.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
switch (USB_HostState)
{
case HOST_STATE_Addressed:
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
{
printf("Error Retrieving Configuration Descriptor.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (MS_Host_ConfigurePipes(&FlashDisk_MS_Interface,
ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError)
{
printf("Attached Device Not a Valid Mass Storage Device.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
{
printf("Error Setting Device Configuration.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf("Mass Storage Device Enumerated.\r\n");
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
uint8_t MaxLUNIndex;
if (MS_Host_GetMaxLUN(&FlashDisk_MS_Interface, &MaxLUNIndex))
{
printf("Error retrieving max LUN index.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf("Total LUNs: %d - Using first LUN in device.\r\n", (MaxLUNIndex + 1));
if (MS_Host_ResetMSInterface(&FlashDisk_MS_Interface))
{
printf("Error resetting Mass Storage interface.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
SCSI_Request_Sense_Response_t SenseData;
if (MS_Host_RequestSense(&FlashDisk_MS_Interface, 0, &SenseData) != 0)
{
printf("Error retrieving device sense.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (MS_Host_PreventAllowMediumRemoval(&FlashDisk_MS_Interface, 0, true))
{
printf("Error setting Prevent Device Removal bit.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
SCSI_Inquiry_Response_t InquiryData;
if (MS_Host_GetInquiryData(&FlashDisk_MS_Interface, 0, &InquiryData))
{
printf("Error retrieving device Inquiry data.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf("Vendor \"%.8s\", Product \"%.16s\"\r\n", InquiryData.VendorID, InquiryData.ProductID);
printf("Waiting until ready...\r\n");
for (;;)
{
uint8_t ErrorCode = MS_Host_TestUnitReady(&FlashDisk_MS_Interface, 0);
if (!(ErrorCode))
break;
/* Check if an error other than a logical command error (device busy) received */
if (ErrorCode != MS_ERROR_LOGICAL_CMD_FAILED)
{
printf("Error waiting for device to be ready.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
}
printf("Retrieving Capacity... ");
SCSI_Capacity_t DiskCapacity;
if (MS_Host_ReadDeviceCapacity(&FlashDisk_MS_Interface, 0, &DiskCapacity))
{
printf("Error retrieving device capacity.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf("%lu blocks of %lu bytes.\r\n", DiskCapacity.Blocks, DiskCapacity.BlockSize);
uint8_t BlockBuffer[DiskCapacity.BlockSize];
if (MS_Host_ReadDeviceBlocks(&FlashDisk_MS_Interface, 0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer))
{
printf("Error reading device block.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf("\r\nContents of first block:\r\n");
for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
{
uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
/* Print out the 16 bytes of the chunk in HEX format */
for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
{
char CurrByte = *(ChunkPtr + ByteOffset);
printf_P(PSTR("%.2X "), CurrByte);
}
printf(" ");
/* Print out the 16 bytes of the chunk in ASCII format */
for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
{
char CurrByte = *(ChunkPtr + ByteOffset);
putchar(isprint(CurrByte) ? CurrByte : '.');
}
printf("\r\n");
}
LEDs_SetAllLEDs(LEDMASK_USB_READY);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
MS_Host_USBTask(&FlashDisk_MS_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_Host_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_Host_DeviceUnattached(void)
{
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
" -- Error Code %d\r\n"
" -- Sub Error Code %d\r\n"
" -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}