You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/mxss
mtei 62b91e6096
Revert "fix build break keyboards/mxss."
6 years ago
..
keymaps/default Cleanup Default Keymaps (#5442) 6 years ago
templates Remove redundant KC_TRNS and KC_NO fillers in default keymaps (#5152) 6 years ago
config.h Remove CUSTOM_MATRIX option from diode direction (#5090) 6 years ago
info.json MxSS Configurator bugfix: removed an extra key that didn't belong (#3362) 6 years ago
mxss.c Fixed issues with MxSS RGB functionality (#3341) 6 years ago
mxss.h MxSS refactor and Configurator bugfix (#3355) 6 years ago
mxss_frontled.h Add MxSS keyboard (#3335) 6 years ago
readme.md Modified URLs to point to new locations 6 years ago
rgblight.c Change rgblight_get_mode & rgb_matrix_get_mode's return type to uint8_t. (#4747) 6 years ago
rules.mk Add MxSS keyboard (#3335) 6 years ago

readme.md

MxSS - Polycarb 65% Kit for MX/SMK

MxSS - Polycarb 65% Kit for MX/SMK

Information:

  • Case: Frosted Polycarbonate, CNC milled
  • Plate: Brass, mirror-finished and electroplated
  • Weight: Same as plate
  • PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish

Details:

  • 2.9 degrees angle on the case
  • Top mount plate
  • Center USB, Type-B Mini
  • MX and SMK (White and Orange) switch support
  • Holtite support
  • RGB underglow
  • 1.5kg with plate and weight

Keyboard Maintainer: MxBlue

Hardware Supported: Custom PCB, ATMega32u4

Hardware Availability: https://geekhack.org/index.php?topic=94986.0

Make example for this keyboard (after setting up your build environment):

make mxss:default

See build environment setup then the make instructions for more information.

Front LED Operation

The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.

There are 3 modes of operation:

  • FLED_OFF - Front LEDs stay off
  • FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
  • FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer

Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).

Custom Keycodes

  • FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
  • FLED_VAI - Increase front LED brightness
  • FLED_VAD - Decrease front LED brightness

Further Notes

As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.