You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/model01
Daniel Shields 6cab514036
Keymap: Initial commit of dshields keymap for the model01 keyboard. (#3942)
6 years ago
..
keymaps Keymap: Initial commit of dshields keymap for the model01 keyboard. (#3942) 6 years ago
config.h Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
info.json Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
leds.c Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
leds.h Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
matrix.c Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
model01.c Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
model01.h Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
readme.md Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
rules.mk Keyboard: add Keyboardio Model 01 (#3900) 6 years ago
wire-protocol-constants.h Keyboard: add Keyboardio Model 01 (#3900) 6 years ago

readme.md

Keyboardio Model 01

A split keyboard.

Keyboard Maintainer: QMK Community
Hardware Supported: Keyboardio Model 01
Hardware Availability: Keyboardio

Make example for this keyboard (after setting up your build environment):

make model01:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Programming the Keyboard

To program the keyboard, if you have avrdude installed:

make model01:default:avrdude

When prompted to reset your keyboard, press the prog key at upper left. If the keyboard does not reset, you can hold the prog key while plugging it into your computer. The prog key will light up red in programming mode.

Features

This implements the standard keymap, including mousekeys.

It doesn't do cursor warping - QMK does not support absolute mouse positioning.

LED support is limited. Gamma compensation and the high speed batch update functions supported by the hardware are not implemented. The high current power switch is also not implemented, so if you try and turn all the LEDs on at full brightness, something may conk out.

Hotplugging the two halves works but is not extensively tested.