You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/OTG/TestApp/TestApp.txt

64 lines
1.8 KiB

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Test Application for the LUFA library
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host/Device (Dual Role)</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Test application. Demonstrates several aspects of the LUFA
* Library. On start-up the current temperature will be printed
* through the USART every 10 seconds, and the current joystick
* position will be indicated via the LEDs on the selected board.
* Pressing the HWB will initiate the USB subsystem, enumerating
* the device (which has <b>no actual functionality beyond
* enumeration as a device or as a host in this demo</b>, and serves
* only to demonstrate the USB portion of the library).
*
* Pressing the HWB a second time will turn off the USB system.
*
* When activated, the USB events will be printed through the
* serial USART.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/