You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/quantum/matrix.c

308 lines
7.4 KiB

/*
Copyright 2012 Jun Wako
Copyright 2014 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#if defined(__AVR__)
#include <avr/io.h>
#endif
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
/* Set 0 if debouncing isn't needed */
/*
* This constant define not debouncing time in msecs, but amount of matrix
* scan loops which should be made to get stable debounced results.
*
* On Ergodox matrix scan rate is relatively low, because of slow I2C.
* Now it's only 317 scans/second, or about 3.15 msec/scan.
* According to Cherry specs, debouncing time is 5 msec.
*
* And so, there is no sense to have DEBOUNCE higher than 2.
*/
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
static uint8_t debouncing = DEBOUNCING_DELAY;
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#if DIODE_DIRECTION == ROW2COL
static matrix_row_t matrix_reversed[MATRIX_COLS];
static matrix_row_t matrix_reversed_debouncing[MATRIX_COLS];
#endif
#if MATRIX_COLS > 16
#define SHIFTER 1UL
#else
#define SHIFTER 1
#endif
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
__attribute__ ((weak))
void matrix_init_quantum(void) {
matrix_init_kb();
}
__attribute__ ((weak))
void matrix_scan_quantum(void) {
matrix_scan_kb();
}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void) {
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
// void matrix_power_up(void) {
// #if DIODE_DIRECTION == COL2ROW
// for (int8_t r = MATRIX_ROWS - 1; r >= 0; --r) {
// /* DDRxn */
// _SFR_IO8((row_pins[r] >> 4) + 1) |= _BV(row_pins[r] & 0xF);
// toggle_row(r);
// }
// for (int8_t c = MATRIX_COLS - 1; c >= 0; --c) {
// /* PORTxn */
// _SFR_IO8((col_pins[c] >> 4) + 2) |= _BV(col_pins[c] & 0xF);
// }
// #else
// for (int8_t c = MATRIX_COLS - 1; c >= 0; --c) {
// /* DDRxn */
// _SFR_IO8((col_pins[c] >> 4) + 1) |= _BV(col_pins[c] & 0xF);
// toggle_col(c);
// }
// for (int8_t r = MATRIX_ROWS - 1; r >= 0; --r) {
// /* PORTxn */
// _SFR_IO8((row_pins[r] >> 4) + 2) |= _BV(row_pins[r] & 0xF);
// }
// #endif
// }
void matrix_init(void) {
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
#ifdef __AVR_ATmega32U4__
MCUCR |= _BV(JTD);
MCUCR |= _BV(JTD);
#endif
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t matrix_scan(void)
{
#if DIODE_DIRECTION == COL2ROW
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
wait_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCING_DELAY;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
wait_us(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
#else
for (uint8_t i = 0; i < MATRIX_COLS; i++) {
select_row(i);
wait_us(30); // without this wait read unstable value.
matrix_row_t rows = read_cols();
if (matrix_reversed_debouncing[i] != rows) {
matrix_reversed_debouncing[i] = rows;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCING_DELAY;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
wait_us(1);
} else {
for (uint8_t i = 0; i < MATRIX_COLS; i++) {
matrix_reversed[i] = matrix_reversed_debouncing[i];
}
}
}
for (uint8_t y = 0; y < MATRIX_ROWS; y++) {
matrix_row_t row = 0;
for (uint8_t x = 0; x < MATRIX_COLS; x++) {
row |= ((matrix_reversed[x] & (1<<y)) >> y) << x;
}
matrix[y] = row;
}
#endif
matrix_scan_quantum();
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
static void init_cols(void)
{
#if DIODE_DIRECTION == COL2ROW
for(int x = 0; x < MATRIX_COLS; x++) {
int pin = col_pins[x];
#else
for(int x = 0; x < MATRIX_ROWS; x++) {
int pin = row_pins[x];
#endif
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF);
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);
}
}
static matrix_row_t read_cols(void)
{
matrix_row_t result = 0;
#if DIODE_DIRECTION == COL2ROW
for(int x = 0; x < MATRIX_COLS; x++) {
int pin = col_pins[x];
#else
for(int x = 0; x < MATRIX_ROWS; x++) {
int pin = row_pins[x];
#endif
result |= (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)) ? 0 : (SHIFTER << x);
}
return result;
}
static void unselect_rows(void)
{
#if DIODE_DIRECTION == COL2ROW
for(int x = 0; x < MATRIX_ROWS; x++) {
int pin = row_pins[x];
#else
for(int x = 0; x < MATRIX_COLS; x++) {
int pin = col_pins[x];
#endif
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF);
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);
}
}
static void select_row(uint8_t row)
{
#if DIODE_DIRECTION == COL2ROW
int pin = row_pins[row];
#else
int pin = col_pins[row];
#endif
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF);
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF);
}