You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/MassStorageHost/SCSI_Codes.h

86 lines
3.9 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header containing macros for possible SCSI commands and SENSE data. Refer to
* the SCSI standard documentation for more information on each SCSI command and
* the SENSE data.
*/
#ifndef _SCSI_CODES_H_
#define _SCSI_CODES_H_
/* Macros: */
#define SCSI_CMD_INQUIRY 0x12
#define SCSI_CMD_REQUEST_SENSE 0x03
#define SCSI_CMD_TEST_UNIT_READY 0x00
#define SCSI_CMD_READ_CAPACITY_10 0x25
#define SCSI_CMD_SEND_DIAGNOSTIC 0x1D
#define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
#define SCSI_CMD_WRITE_10 0x2A
#define SCSI_CMD_READ_10 0x28
#define SCSI_CMD_WRITE_6 0x0A
#define SCSI_CMD_READ_6 0x08
#define SCSI_CMD_VERIFY_10 0x2F
#define SCSI_CMD_MODE_SENSE_6 0x1A
#define SCSI_CMD_MODE_SENSE_10 0x5A
#define SCSI_SENSE_KEY_GOOD 0x00
#define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01
#define SCSI_SENSE_KEY_NOT_READY 0x02
#define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
#define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
#define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05
#define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06
#define SCSI_SENSE_KEY_DATA_PROTECT 0x07
#define SCSI_SENSE_KEY_BLANK_CHECK 0x08
#define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09
#define SCSI_SENSE_KEY_COPY_ABORTED 0x0A
#define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B
#define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D
#define SCSI_SENSE_KEY_MISCOMPARE 0x0E
#define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
#define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04
#define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
#define SCSI_ASENSE_WRITE_PROTECTED 0x27
#define SCSI_ASENSE_FORMAT_ERROR 0x31
#define SCSI_ASENSE_INVALID_COMMAND 0x20
#define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
#define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
#define SCSI_ASENSEQ_NO_QUALIFIER 0x00
#define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01
#define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02
#define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
#endif