You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Projects/USBtoSerial/USBtoSerial.c

199 lines
6.0 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the USBtoSerial project. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "USBtoSerial.h"
/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
RingBuff_t USBtoUSART_Buffer;
/** Circular buffer to hold data from the serial port before it is sent to the host. */
RingBuff_t USARTtoUSB_Buffer;
/** LUFA CDC Class driver interface configuration and state information. This structure is
* passed to all CDC Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
{
.Config =
{
.ControlInterfaceNumber = 0,
.DataINEndpointNumber = CDC_TX_EPNUM,
.DataINEndpointSize = CDC_TXRX_EPSIZE,
.DataINEndpointDoubleBank = false,
.DataOUTEndpointNumber = CDC_RX_EPNUM,
.DataOUTEndpointSize = CDC_TXRX_EPSIZE,
.DataOUTEndpointDoubleBank = false,
.NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM,
.NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE,
.NotificationEndpointDoubleBank = false,
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
Buffer_Initialize(&USBtoUSART_Buffer);
Buffer_Initialize(&USARTtoUSB_Buffer);
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
sei();
for (;;)
{
/* Read bytes from the USB OUT endpoint into the USART transmit buffer */
for (uint8_t DataBytesRem = CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface); DataBytesRem != 0; DataBytesRem--)
{
if (!(BUFF_STATICSIZE - USBtoUSART_Buffer.Elements))
break;
Buffer_StoreElement(&USBtoUSART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface));
}
/* Read bytes from the USART receive buffer into the USB IN endpoint */
while (USARTtoUSB_Buffer.Elements)
CDC_Device_SendByte(&VirtualSerial_CDC_Interface, Buffer_GetElement(&USARTtoUSB_Buffer));
/* Load bytes from the USART transmit buffer into the USART */
while (USBtoUSART_Buffer.Elements)
Serial_TxByte(Buffer_GetElement(&USBtoUSART_Buffer));
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
Serial_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the library USB Connection event. */
void EVENT_USB_Device_Connect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the library USB Disconnection event. */
void EVENT_USB_Device_Disconnect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface)))
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Event handler for the library USB Unhandled Control Request event. */
void EVENT_USB_Device_UnhandledControlRequest(void)
{
CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
}
/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
* for later transmission to the host.
*/
ISR(USART1_RX_vect, ISR_BLOCK)
{
uint8_t ReceivedByte = UDR1;
if (USB_DeviceState == DEVICE_STATE_Configured)
Buffer_StoreElement(&USARTtoUSB_Buffer, ReceivedByte);
}
/** Event handler for the CDC Class driver Line Encoding Changed event.
*
* \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced
*/
void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
{
uint8_t ConfigMask = 0;
switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
{
case CDC_PARITY_Odd:
ConfigMask = ((1 << UPM11) | (1 << UPM10));
break;
case CDC_PARITY_Even:
ConfigMask = (1 << UPM11);
break;
}
if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits)
ConfigMask |= (1 << USBS1);
switch (CDCInterfaceInfo->State.LineEncoding.DataBits)
{
case 6:
ConfigMask |= (1 << UCSZ10);
break;
case 7:
ConfigMask |= (1 << UCSZ11);
break;
case 8:
ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
break;
}
UCSR1A = (1 << U2X1);
UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
UCSR1C = ConfigMask;
UBRR1 = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
}