You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Bootloaders/TeensyHID/TeensyHID.txt

67 lines
1.9 KiB

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Teensy HID Class USB AVR Bootloader
*
* \section SSec_Compat Demo Compatibility:
*
* The following table indicates what microcontrollers are compatible with this demo.
*
* - AT90USB646
* - AT90USB162
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device Class (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Class Standard</td>
* <td>Teensy Programming Protocol Details</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode</td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* This bootloader enumerates to the host as a HID Class device, allowing for Teensy compatible programming
* software to load firmware onto the AVR, such as the official software at http://www.pjrc.com/teensy/.
*
* Out of the box this bootloader builds for the USB162, and will fit into 2KB of bootloader space.
*
* This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains
* compatible with no changes.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/