You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Bootloaders/MassStorage/Lib/VirtualFAT.c

330 lines
11 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Virtualized FAT12 filesystem implementation, to perform self-programming
* in response to read and write requests to the virtual filesystem by the
* host PC.
*/
#define INCLUDE_FROM_VIRTUAL_FAT_C
#include "VirtualFAT.h"
/** FAT filesystem boot sector block, must be the first sector on the physical
* disk so that the host can identify the presence of a FAT filesystem. This
* block is truncated; normally a large bootstrap section is located near the
* end of the block for booting purposes however as this is not meant to be a
* bootable disk it is omitted for space reasons.
*
* \note When returning the boot block to the host, the magic signature 0xAA55
* must be added to the very end of the block to identify it as a boot
* block.
*/
static const FATBootBlock_t BootBlock =
{
.Bootstrap = {0xEB, 0x3C, 0x90},
.Description = "mkdosfs",
.SectorSize = SECTOR_SIZE_BYTES,
.SectorsPerCluster = SECTOR_PER_CLUSTER,
.ReservedSectors = 1,
.FATCopies = 2,
.RootDirectoryEntries = (SECTOR_SIZE_BYTES / sizeof(FATDirectoryEntry_t)),
.TotalSectors16 = LUN_MEDIA_BLOCKS,
.MediaDescriptor = 0xF8,
.SectorsPerFAT = 1,
.SectorsPerTrack = (LUN_MEDIA_BLOCKS % 64),
.Heads = (LUN_MEDIA_BLOCKS / 64),
.HiddenSectors = 0,
.TotalSectors32 = 0,
.PhysicalDriveNum = 0,
.ExtendedBootRecordSig = 0x29,
.VolumeSerialNumber = 0x12345678,
.VolumeLabel = "LUFA BOOT ",
.FilesystemIdentifier = "FAT12 ",
};
/** FAT 8.3 style directory entry, for the virtual FLASH contents file. */
FATDirectoryEntry_t FirmwareFileEntries[] =
{
/* Root volume label entry; disk label is contained in the Filename and
* Extension fields (concatenated) with a special attribute flag - other
* fields are ignored. Should be the same as the label in the boot block.
*/
[DISK_FILE_ENTRY_VolumeID] =
{
.MSDOS_Directory =
{
.Name = "LUFA BOOT ",
.Attributes = FAT_FLAG_VOLUME_NAME,
.Reserved = {0},
.CreationTime = 0,
.CreationDate = 0,
.StartingCluster = 0,
.Reserved2 = 0,
}
},
/* VFAT Long File Name entry for the virtual firmware file; required to
* prevent corruption from systems that are unable to detect the device
* as being a legacy MSDOS style FAT12 volume. */
[DISK_FILE_ENTRY_FirmwareLFN] =
{
.VFAT_LongFileName =
{
.Ordinal = FAT_ORDINAL_LAST_ENTRY | 1,
.Attribute = FAT_FLAG_LONG_FILE_NAME,
.Reserved1 = 0,
.Reserved2 = 0,
.Checksum = 0x57,
.Unicode1 = 'F',
.Unicode2 = 'I',
.Unicode3 = 'R',
.Unicode4 = 'M',
.Unicode5 = 'W',
.Unicode6 = 'A',
.Unicode7 = 'R',
.Unicode8 = 'E',
.Unicode9 = '.',
.Unicode10 = 'B',
.Unicode11 = 'I',
.Unicode12 = 'N',
.Unicode13 = 0,
}
},
/* MSDOS file entry for the virtual Firmware image. */
[DISK_FILE_ENTRY_FirmwareMSDOS] =
{
.MSDOS_File =
{
.Filename = "FIRMWARE",
.Extension = "BIN",
.Attributes = 0,
.Reserved = {0},
.CreationTime = FAT_TIME(1, 1, 0),
.CreationDate = FAT_DATE(14, 2, 1989),
.StartingCluster = 2,
.FileSizeBytes = FIRMWARE_FILE_SIZE_BYTES,
}
},
};
/** Starting block of the virtual firmware file image on disk. On Windows, files
* are (usually?) replaced using the original file's physical sectors. On Linux
* file replacements are performed with an offset.
*/
uint16_t FileStartBlock = DISK_BLOCK_DataStartBlock;
/** Updates a FAT12 cluster entry in the FAT file table with the specified next
* chain index. If the cluster is the last in the file chain, the magic value
* 0xFFF is used.
*
* \note FAT data cluster indexes are offset by 2, so that cluster 2 is the
* first file data cluster on the disk. See the FAT specification.
*
* \param[out] FATTable Pointer to the FAT12 allocation table
* \param[in] Index Index of the cluster entry to update
* \param[in] ChainEntry Next cluster index in the file chain
*/
static void UpdateFAT12ClusterEntry(uint8_t* const FATTable,
const uint16_t Index,
const uint16_t ChainEntry)
{
/* Calculate the starting offset of the cluster entry in the FAT12 table */
uint8_t FATOffset = (Index + (Index >> 1));
bool UpperNibble = ((Index & 1) != 0);
/* Check if the start of the entry is at an upper nibble of the byte, fill
* out FAT12 entry as required */
if (UpperNibble)
{
FATTable[FATOffset] = (FATTable[FATOffset] & 0x0F) | ((ChainEntry & 0x0F) << 4);
FATTable[FATOffset + 1] = (ChainEntry >> 4);
}
else
{
FATTable[FATOffset] = ChainEntry;
FATTable[FATOffset + 1] = (FATTable[FATOffset] & 0xF0) | (ChainEntry >> 8);
}
}
/** Reads or writes a block of data from/to the physical device FLASH using a
* block buffer stored in RAM, if the requested block is within the virtual
* firmware file's sector ranges in the emulated FAT file system.
*
* \param[in] BlockNumber Physical disk block to read from
* \param[in,out] BlockBuffer Pointer to the start of the block buffer in RAM
* \param[in] Read If \c true, the requested block is read, if
* \c false, the requested block is written
*/
static void ReadWriteFirmwareFileBlock(const uint16_t BlockNumber,
uint8_t* BlockBuffer,
const bool Read)
{
/* Range check the write request - abort if requested block is not within the
* virtual firmware file sector range */
if (!((BlockNumber >= FileStartBlock) && (BlockNumber < (FileStartBlock + FILE_SECTORS(FIRMWARE_FILE_SIZE_BYTES)))))
return;
#if (FLASHEND > 0xFFFF)
uint32_t FlashAddress = (uint32_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES;
#else
uint16_t FlashAddress = (uint16_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES;
#endif
if (Read)
{
/* Read out the mapped block of data from the device's FLASH */
for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++)
{
#if (FLASHEND > 0xFFFF)
BlockBuffer[i] = pgm_read_byte_far(FlashAddress++);
#else
BlockBuffer[i] = pgm_read_byte(FlashAddress++);
#endif
}
}
else
{
/* Write out the mapped block of data to the device's FLASH */
for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i += 2)
{
if ((FlashAddress % SPM_PAGESIZE) == 0)
{
/* Erase the given FLASH page, ready to be programmed */
BootloaderAPI_ErasePage(FlashAddress);
}
/* Write the next data word to the FLASH page */
BootloaderAPI_FillWord(FlashAddress, (BlockBuffer[i + 1] << 8) | BlockBuffer[i]);
FlashAddress += 2;
if ((FlashAddress % SPM_PAGESIZE) == 0)
{
/* Write the filled FLASH page to memory */
BootloaderAPI_WritePage(FlashAddress - SPM_PAGESIZE);
}
}
}
}
/** Writes a block of data to the virtual FAT filesystem, from the USB Mass
* Storage interface.
*
* \param[in] BlockNumber Index of the block to write.
*/
void VirtualFAT_WriteBlock(const uint16_t BlockNumber)
{
uint8_t BlockBuffer[SECTOR_SIZE_BYTES];
/* Buffer the entire block to be written from the host */
Endpoint_Read_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL);
Endpoint_ClearOUT();
if (BlockNumber == DISK_BLOCK_RootFilesBlock)
{
/* Copy over the updated directory entries */
memcpy(FirmwareFileEntries, BlockBuffer, sizeof(FirmwareFileEntries));
/* Save the new firmware file block offset so the written and read file
* contents can be correctly mapped to the device's FLASH pages */
FileStartBlock = DISK_BLOCK_DataStartBlock +
(FirmwareFileEntries[DISK_FILE_ENTRY_FirmwareMSDOS].MSDOS_File.StartingCluster - 2) * SECTOR_PER_CLUSTER;
}
else
{
ReadWriteFirmwareFileBlock(BlockNumber, BlockBuffer, false);
}
}
/** Reads a block of data from the virtual FAT filesystem, and sends it to the
* host via the USB Mass Storage interface.
*
* \param[in] BlockNumber Index of the block to read.
*/
void VirtualFAT_ReadBlock(const uint16_t BlockNumber)
{
uint8_t BlockBuffer[SECTOR_SIZE_BYTES];
memset(BlockBuffer, 0x00, sizeof(BlockBuffer));
switch (BlockNumber)
{
case DISK_BLOCK_BootBlock:
memcpy(BlockBuffer, &BootBlock, sizeof(FATBootBlock_t));
/* Add the magic signature to the end of the block */
BlockBuffer[SECTOR_SIZE_BYTES - 2] = 0x55;
BlockBuffer[SECTOR_SIZE_BYTES - 1] = 0xAA;
break;
case DISK_BLOCK_FATBlock1:
case DISK_BLOCK_FATBlock2:
/* Cluster 0: Media type/Reserved */
UpdateFAT12ClusterEntry(BlockBuffer, 0, 0xF00 | BootBlock.MediaDescriptor);
/* Cluster 1: Reserved */
UpdateFAT12ClusterEntry(BlockBuffer, 1, 0xFFF);
/* Cluster 2 onwards: Cluster chain of FIRMWARE.BIN */
for (uint16_t i = 0; i <= FILE_CLUSTERS(FIRMWARE_FILE_SIZE_BYTES); i++)
{
uint16_t CurrentCluster = FirmwareFileEntries[DISK_FILE_ENTRY_FirmwareMSDOS].MSDOS_File.StartingCluster + i;
uint16_t NextCluster = CurrentCluster + 1;
/* Mark last cluster as end of file */
if (i == FILE_CLUSTERS(FIRMWARE_FILE_SIZE_BYTES))
NextCluster = 0xFFF;
UpdateFAT12ClusterEntry(BlockBuffer, CurrentCluster, NextCluster);
}
break;
case DISK_BLOCK_RootFilesBlock:
memcpy(BlockBuffer, FirmwareFileEntries, sizeof(FirmwareFileEntries));
break;
default: /* Blocks 4 onwards: Data allocation section */
ReadWriteFirmwareFileBlock(BlockNumber, BlockBuffer, true);
break;
}
/* Write the entire read block Buffer to the host */
Endpoint_Write_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL);
Endpoint_ClearIN();
}