You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/LUFA/Drivers/USB/LowLevel/LowLevel.c

267 lines
6.3 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "LowLevel.h"
#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY))
volatile uint8_t USB_CurrentMode = USB_MODE_NONE;
#endif
#if !defined(USE_STATIC_OPTIONS)
volatile uint8_t USB_Options;
#endif
void USB_Init(
#if defined(USB_CAN_BE_BOTH)
const uint8_t Mode
#endif
#if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
,
#elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
void
#endif
#if !defined(USE_STATIC_OPTIONS)
const uint8_t Options
#endif
)
{
USB_ShutDown();
#if defined(USB_CAN_BE_BOTH)
USB_CurrentMode = Mode;
#endif
#if !defined(USE_STATIC_OPTIONS)
USB_Options = Options;
#endif
#if defined(USB_CAN_BE_HOST)
USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
#endif
#if defined(USB_DEVICE_ONLY) && defined(USB_FULL_CONTROLLER)
UHWCON |= (1 << UIMOD);
#elif defined(USB_HOST_ONLY)
UHWCON &= ~(1 << UIMOD);
#elif defined(USB_CAN_BE_BOTH)
if (Mode == USB_MODE_UID)
{
UHWCON |= (1 << UIDE);
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
else if (Mode == USB_MODE_DEVICE)
{
UHWCON |= (1 << UIMOD);
}
else if (Mode == USB_MODE_HOST)
{
UHWCON &= ~(1 << UIMOD);
}
else
{
EVENT_USB_InitFailure(USB_INITERROR_NoUSBModeSpecified);
return;
}
#endif
USB_ResetInterface();
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
USB_OTGPAD_On();
#endif
USB_IsInitialized = true;
sei();
}
void USB_ShutDown(void)
{
if (USB_IsConnected)
EVENT_USB_Disconnect();
USB_Detach();
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
USB_IsConnected = false;
USB_IsInitialized = false;
#if defined(USB_CAN_BE_HOST)
USB_HostState = HOST_STATE_Unattached;
#endif
#if defined(USB_CAN_BE_DEVICE)
USB_ConfigurationNumber = 0;
#endif
#if defined(CAN_BE_BOTH)
USB_CurrentMode = USB_MODE_NONE;
#endif
USB_Interface_Disable();
USB_PLL_Off();
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
USB_OTGPAD_Off();
#endif
#if defined(USB_CAN_BE_BOTH)
UHWCON &= ~(1 << UIDE);
#endif
}
void USB_ResetInterface(void)
{
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
USB_IsConnected = false;
#if defined(USB_CAN_BE_HOST)
USB_HostState = HOST_STATE_Unattached;
#endif
#if defined(USB_CAN_BE_DEVICE)
USB_ConfigurationNumber = 0;
USB_IsSuspended = false;
USB_RemoteWakeupEnabled = false;
USB_CurrentlySelfPowered = false;
#endif
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
#if defined(USB_MODIFIED_FULL_CONTROLLER)
PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
#endif
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_Interface_Reset();
#if defined(USB_CAN_BE_BOTH)
if (UHWCON & (1 << UIDE))
{
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
#endif
if (!(USB_Options & USB_OPT_REG_DISABLED))
USB_REG_On();
USB_CLK_Unfreeze();
#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)))
if (USB_CurrentMode == USB_MODE_DEVICE)
{
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
USB_Device_SetLowSpeed();
else
USB_Device_SetHighSpeed();
USB_INT_Enable(USB_INT_VBUS);
}
#endif
#if (defined(USB_CAN_BE_DEVICE) && !defined(FIXED_CONTROL_ENDPOINT_SIZE))
if (USB_CurrentMode == USB_MODE_DEVICE)
{
USB_Descriptor_Device_t* DeviceDescriptorPtr;
if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
{
#if defined(USE_RAM_DESCRIPTORS)
USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
#elif defined(USE_EEPROM_DESCRIPTORS)
USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#else
USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#endif
}
}
#endif
USB_Attach();
#if defined(USB_DEVICE_ONLY)
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_EORSTI);
#if defined(CONTROL_ONLY_DEVICE)
UENUM = ENDPOINT_CONTROLEP;
#endif
#elif defined(USB_HOST_ONLY)
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
#else
if (USB_CurrentMode == USB_MODE_DEVICE)
{
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_EORSTI);
#if defined(CONTROL_ONLY_DEVICE)
UENUM = ENDPOINT_CONTROLEP;
#endif
}
else if (USB_CurrentMode == USB_MODE_HOST)
{
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
}
#endif
}