You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/ergodone
fauxpark 545f95c8f4
Migrate ACTION_LAYER_TAP_TOGGLEs to TT()
6 years ago
..
keymaps Migrate ACTION_LAYER_TAP_TOGGLEs to TT() 6 years ago
config.h Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955) 6 years ago
ergodone.c Update ergodone.c 7 years ago
ergodone.h Configurator layout repair for Ergodone, Ergodox Infinity and ErgoTravel (#3173) 6 years ago
expander.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 7 years ago
expander.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 7 years ago
i2cmaster.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 7 years ago
info.json Add 80 key layout to Ergodone, as it appears to support it (#2984) 7 years ago
matrix.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 7 years ago
readme.md Fix hyperlinks in ErgoDone readme.md (#3323) 6 years ago
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 7 years ago
twimaster.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 7 years ago

readme.md

ErgoDone

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

  • Keyboard maintainer: Yu He
  • Hardware supported:
    • ErgoDone v1.3 (tested)
  • Hardware availability:

Building the firmware

Install the build tools.

In the root directory of the repository, build the firmware with a command like:

make ergodone:default

For more information on the layout option and other ones, see the make guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

  1. To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard. Ergodone Flash Mode

  2. To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):

    hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex