You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/kbdfans/kbdpad/mk1
MechMerlin a2d61d76fa
[Keyboard] New Keyboard: KBDPad MKI (#6452)
5 years ago
..
keymaps/default [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago
config.h [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago
info.json [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago
mk1.c [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago
mk1.h [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago
readme.md [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago
rules.mk [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago
usbconfig.h [Keyboard] New Keyboard: KBDPad MKI (#6452) 5 years ago

readme.md

KBDPad MKI

Custom numpad.

Keyboard Maintainer: MechMerlin
Hardware Supported: KBDPad MKI
Hardware Availability: No longer available.

Make example for this keyboard (after setting up your build environment):

make kbdfans/kbdpad/mk1:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as 0 while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.