You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/LUFA/Drivers/USB/Class/Device/MassStorage.h

188 lines
9.1 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \ingroup Group_USBDeviceClassDrivers
* @defgroup Group_USBClassMSDevice Mass Storage Device Class Driver - LUFA/Drivers/Class/Device/MassStorage.h
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
* - LUFA/Drivers/USB/Class/Device/MassStorage.c
*
* \section Module Description
* Functions, macros, variables, enums and types related to the management of USB Mass Storage Class interfaces
* within a USB device.
*
* @{
*/
#ifndef _MS_CLASS_H_
#define _MS_CLASS_H_
/* Includes: */
#include "../../USB.h"
#include <string.h>
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Macros: */
/** Mass Storage Class specific request to reset the Mass Storage interface, ready for the next command. */
#define REQ_MassStorageReset 0xFF
/** Mass Storage Class specific request to retrieve the total number of Logical Units (drives) in the SCSI device. */
#define REQ_GetMaxLUN 0xFE
/** Magic signature for a Command Block Wrapper used in the Mass Storage Bulk-Only transport protocol. */
#define MS_CBW_SIGNATURE 0x43425355UL
/** Magic signature for a Command Status Wrapper used in the Mass Storage Bulk-Only transport protocol. */
#define MS_CSW_SIGNATURE 0x53425355UL
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from host-to-device. */
#define MS_COMMAND_DIR_DATA_OUT (0 << 7)
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */
#define MS_COMMAND_DIR_DATA_IN (1 << 7)
/* Type defines: */
/** Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
typedef struct
{
uint32_t Signature; /**< Command block signature, must be CBW_SIGNATURE to indicate a valid Command Block */
uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper */
uint32_t DataTransferLength; /** Length of the optional data portion of the issued command, in bytes */
uint8_t Flags; /**< Command block flags, indicating command data direction */
uint8_t LUN; /**< Logical Unit number this command is issued to */
uint8_t SCSICommandLength; /**< Length of the issued SCSI command within the SCSI command data array */
uint8_t SCSICommandData[16]; /**< Issued SCSI command in the Command Block */
} CommandBlockWrapper_t;
/** Type define for a Command Status Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
typedef struct
{
uint32_t Signature; /**< Status block signature, must be CSW_SIGNATURE to indicate a valid Command Status */
uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper */
uint32_t DataTransferResidue; /**< Number of bytes of data not processed in the SCSI command */
uint8_t Status; /**< Status code of the issued command - a value from the MassStorage_CommandStatusCodes_t enum */
} CommandStatusWrapper_t;
/* Enums: */
/** Enum for the possible command status wrapper return status codes. */
enum MassStorage_CommandStatusCodes_t
{
SCSI_Command_Pass = 0, /**< Command completed with no error */
SCSI_Command_Fail = 1, /**< Command failed to complete - host may check the exact error via a SCSI REQUEST SENSE command */
SCSI_Phase_Error = 2 /**< Command failed due to being invalid in the current phase */
};
/* Type Defines: */
/** Class state structure. An instance of this structure should be made for each Mass Storage interface
* within the user application, and passed to each of the Mass Storage class driver functions as the
* MSInterfaceInfo parameter. The contents of this structure should be set to their correct
* values when used, or ommitted to force the library to use default values.
*/
typedef struct
{
uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device */
uint8_t DataINEndpointNumber; /**< Endpoint number of the Mass Storage interface's IN data endpoint */
uint16_t DataINEndpointSize; /**< Size in bytes of the Mass Storage interface's IN data endpoint */
uint8_t DataOUTEndpointNumber; /**< Endpoint number of the Mass Storage interface's OUT data endpoint */
uint16_t DataOUTEndpointSize; /**< Size in bytes of the Mass Storage interface's OUT data endpoint */
uint8_t TotalLUNs; /**< Total number of logical drives in the Mass Storage interface */
CommandBlockWrapper_t CommandBlock; /**< Mass Storage class command block structure, used internally
* by the class driver
*/
CommandStatusWrapper_t CommandStatus; /**< Mass Storage class command status structure, used internally
* by the class driver
*/
bool IsMassStoreReset; /**< Flag indicating that the host has requested that the Mass Storage interface be reset
* and that all current Mass Storage operations should immediately abort
*/
} USB_ClassInfo_MS_t;
/* Function Prototypes: */
#if defined(INCLUDE_FROM_MS_CLASS_C)
static void USB_MS_ReturnCommandStatus(USB_ClassInfo_MS_t* MSInterfaceInfo);
static bool USB_MS_ReadInCommandBlock(USB_ClassInfo_MS_t* MSInterfaceInfo);
static uint8_t StreamCallback_AbortOnMassStoreReset(void);
#endif
/** Configures the endpoints of a given Mass Storage interface, ready for use. This should be linked to the library
* \ref EVENT_USB_ConfigurationChanged() event so that the endpoints are configured when the configuration
* containing the given Mass Storage interface is selected.
*
* \param MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
*
* \return Boolean true if the endpoints were sucessfully configured, false otherwise
*/
bool USB_MS_ConfigureEndpoints(USB_ClassInfo_MS_t* MSInterfaceInfo);
/** Processes incomming control requests from the host, that are directed to the given Mass Storage class interface. This should be
* linked to the library \ref EVENT_USB_UnhandledControlPacket() event.
*
* \param MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
*/
void USB_MS_ProcessControlPacket(USB_ClassInfo_MS_t* MSInterfaceInfo);
/** General management task for a given Mass Storage class interface, required for the correct operation of the interface. This should
* be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
*
* \param MSInterfaceInfo Pointer to a structure containing a Mass Storage configuration and state.
*/
void USB_MS_USBTask(USB_ClassInfo_MS_t* MSInterfaceInfo);
/** Mass Storage class driver callback for the user processing of a received SCSI command. This callback will fire each time the
* host sends a SCSI command which requires processing by the user application. Inside this callback the user is responsible
* for the processing of the received SCSI command from the host. The SCSI command is available in the CommandBlock structure
* inside the Mass Storage class state structure passed as a parameter to the callback function.
*
* \param MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
*
* \return Boolean true if the SCSI command was successfully processed, false otherwise
*/
bool CALLBACK_USB_MS_SCSICommandReceived(USB_ClassInfo_MS_t* MSInterfaceInfo);
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */