You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/percent/skog
matth 3882ceefc1
updaded matt xd87
5 years ago
..
keymaps/default updaded matt xd87 5 years ago
README.md updaded matt xd87 5 years ago
backlight.c updaded matt xd87 5 years ago
backlight_custom.h updaded matt xd87 5 years ago
breathing_custom.h updaded matt xd87 5 years ago
config.h updaded matt xd87 5 years ago
i2c.c updaded matt xd87 5 years ago
i2c.h updaded matt xd87 5 years ago
info.json updaded matt xd87 5 years ago
matrix.c updaded matt xd87 5 years ago
rules.mk updaded matt xd87 5 years ago
skog.c updaded matt xd87 5 years ago
skog.h updaded matt xd87 5 years ago
usbconfig.h updaded matt xd87 5 years ago

README.md

Skog TKL

Keyboard Maintainer: QMK Community
Hardware Supported: Skog PCB
Hardware Availability: https://geekhack.org/index.php?topic=87953.0

Make example for this keyboard (after setting up your build environment):

make percent/skog:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as Pause while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

Please Note: You will need to use the EEP_RST keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.