You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/keebio/levinson
matth 3882ceefc1
updaded matt xd87
5 years ago
..
keymaps updaded matt xd87 5 years ago
rev1 Remove old promicro_bootloader_jmp() declarations (#6444) 5 years ago
rev2 Remove old promicro_bootloader_jmp() declarations (#6444) 5 years ago
rev3 Remove old promicro_bootloader_jmp() declarations (#6444) 5 years ago
config.h [Keyboard] Move Keebio boards to own folder (#5109) 6 years ago
info.json [Keyboard] Move Keebio boards to own folder (#5109) 6 years ago
levinson.c [Keyboard] Move Keebio boards to own folder (#5109) 6 years ago
levinson.h [Keyboard] Add Levinson Rev 3 (#6064) 6 years ago
readme.md [Keyboard] Move Keebio boards to own folder (#5109) 6 years ago
rules.mk [Keyboard] Move Keebio boards to own folder (#5109) 6 years ago

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make levinson/rev2:default

Example of flashing this keyboard with Pro micro:

make levinson/rev2:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make levinson/rev2:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide