You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/pearl
matth 3882ceefc1
updaded matt xd87
5 years ago
..
keymaps Remove RGB_SMOD alias and replace uses with RGB_MOD (#4319) 6 years ago
config.h Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) 6 years ago
info.json More QMK Configurator Support for Pearl (#2814) 7 years ago
pearl.c [Keyboard] Pearl Refactors (#5907) 6 years ago
pearl.h [Keyboard] Pearl Refactors (#5907) 6 years ago
readme.md [Keyboard] Pearl Refactors (#5907) 6 years ago
rules.mk updaded matt xd87 5 years ago
usbconfig.h [Keyboard] Pearl Refactors (#5907) 6 years ago

readme.md

Pearl 40%

Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel ATMEGA32A MCU.

Keyboard Maintainer: Ethan Madden
Hardware Supported: Pearl
Hardware Availability: Geekhack Group Buy

Make example for this keyboard (after setting up your build environment):

make pearl:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:
    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.
    brew cask install crosspack-avr
    
  3. Install the following packages:
    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.
  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

Please Note: You will need to use the EEP_RST keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.