You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c

266 lines
11 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#define INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C
#include "BluetoothHCICommands.h"
static BT_HCICommand_Header_t HCICommandHeader;
uint8_t Bluetooth_HCIProcessingState;
static uint8_t Bluetooth_HCINextState;
static uint8_t Bluetooth_TempDeviceAddress[6];
void Bluetooth_HCITask(void)
{
switch (Bluetooth_HCIProcessingState)
{
case Bluetooth_ProcessEvents:
Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE);
Pipe_Unfreeze();
if (Pipe_IsReadWriteAllowed())
{
BT_HCIEvent_Header_t HCIEventHeader;
/* Read in the event header to fetch the event code and payload length */
Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader));
/* Create a temporary buffer for the event parameters */
uint8_t EventParams[HCIEventHeader.ParameterLength];
/* Read in the event parameters into the temporary buffer */
Pipe_Read_Stream_LE(&EventParams, HCIEventHeader.ParameterLength);
Pipe_ClearIN();
switch (HCIEventHeader.EventCode)
{
case EVENT_COMMAND_COMPLETE:
Bluetooth_HCIProcessingState = Bluetooth_HCINextState;
break;
case EVENT_COMMAND_STATUS:
/* If the execution of a command failed, reset the stack */
if (((BT_HCIEvent_CommandStatus_t*)&EventParams)->Status)
Bluetooth_HCIProcessingState = Bluetooth_Init;
break;
case EVENT_CONNECTION_REQUEST:
/* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_TempDeviceAddress,
&((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->RemoteAddress,
sizeof(Bluetooth_TempDeviceAddress));
bool IsACLConnection = (((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType == 0x01);
/* Only accept the connection if it is a ACL (data) connection, a device is not already connected
and the user application has indicated that the connection should be allowed */
Bluetooth_HCIProcessingState = (Bluetooth_Connection.IsConnected || !(IsACLConnection) ||
!(Bluetooth_ConnectionRequest(Bluetooth_TempDeviceAddress))) ?
Bluetooth_Conn_RejectConnection : Bluetooth_Conn_AcceptConnection;
break;
case EVENT_PIN_CODE_REQUEST:
/* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_TempDeviceAddress,
&((BT_HCIEvent_PinCodeReq_t*)&EventParams)->RemoteAddress,
sizeof(Bluetooth_TempDeviceAddress));
Bluetooth_HCIProcessingState = Bluetooth_Conn_SendPINCode;
break;
case EVENT_CONNECTION_COMPLETE:
/* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_Connection.RemoteAddress,
&((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->RemoteAddress,
sizeof(Bluetooth_TempDeviceAddress));
/* Store the created connection handle and indicate that the connection has been established */
Bluetooth_Connection.ConnectionHandle = ((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle;
Bluetooth_Connection.IsConnected = true;
Bluetooth_ConnectionComplete();
break;
case EVENT_DISCONNECTION_COMPLETE:
/* Device disconnected, indicate connection information no longer valid */
Bluetooth_Connection.IsConnected = false;
Bluetooth_DisconnectionComplete();
Bluetooth_HCIProcessingState = Bluetooth_Init;
break;
}
}
Pipe_Freeze();
break;
case Bluetooth_Init:
/* Reset the connection information structure to destroy any previous connection state */
memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection));
Bluetooth_HCIProcessingState = Bluetooth_Init_Reset;
break;
case Bluetooth_Init_Reset:
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_RESET},
ParameterLength: 0,
};
/* Send the command to reset the bluetooth dongle controller */
Bluetooth_SendHCICommand(NULL, 0);
Bluetooth_HCINextState = Bluetooth_Init_SetLocalName;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Init_SetLocalName:
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME},
ParameterLength: 248,
};
/* Send the command to set the bluetooth dongle's name for other devices to see */
Bluetooth_SendHCICommand(Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
Bluetooth_HCINextState = Bluetooth_Init_SetDeviceClass;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Init_SetDeviceClass:
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE},
ParameterLength: 3,
};
/* Send the command to set the class of the device for other devices to see */
Bluetooth_SendHCICommand(&Bluetooth_DeviceConfiguration.Class, 3);
Bluetooth_HCINextState = Bluetooth_Init_WriteScanEnable;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Init_WriteScanEnable:
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE},
ParameterLength: 1,
};
uint8_t Interval = BT_SCANMODE_InquiryAndPageScans;
/* Send the command to set the remote device scanning mode */
Bluetooth_SendHCICommand(&Interval, 1);
Bluetooth_HCINextState = Bluetooth_ProcessEvents;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Conn_AcceptConnection:
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST},
ParameterLength: sizeof(BT_HCICommand_AcceptConnectionReq_t),
};
/* Copy over the temporary BT device address saved from the Connection Request event, indicate slave
connection role */
BT_HCICommand_AcceptConnectionReq_t AcceptConnectionParams;
memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress,
sizeof(AcceptConnectionParams.RemoteAddress));
AcceptConnectionParams.SlaveRole = true;
/* Send the command to accept the remote connection request */
Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(BT_HCICommand_AcceptConnectionReq_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Conn_RejectConnection:
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_REJECT_CONNECTION_REQUEST},
ParameterLength: sizeof(BT_HCICommand_RejectConnectionReq_t),
};
/* Copy over the temporary BT device address saved from the Connection Request event, indicate failure
to accept the connection due to limited device resources or incorrect device address */
BT_HCICommand_RejectConnectionReq_t RejectConnectionParams;
memcpy(RejectConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(RejectConnectionParams.RemoteAddress));
RejectConnectionParams.Reason = Bluetooth_Connection.IsConnected ? ERROR_LIMITED_RESOURCES : ERROR_UNACCEPTABLE_BDADDR;
/* Send the command to reject the remote connection request */
Bluetooth_SendHCICommand(&RejectConnectionParams, sizeof(BT_HCICommand_RejectConnectionReq_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Conn_SendPINCode:
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY},
ParameterLength: sizeof(BT_HCICommand_PinCodeResp_t),
};
/* Copy over the temporary BT device address saved from the PIN Code Request event, copy over the
local PIN authentication code to the response */
BT_HCICommand_PinCodeResp_t PINCodeRequestParams;
memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(PINCodeRequestParams.RemoteAddress));
PINCodeRequestParams.PINCodeLength = strlen(Bluetooth_DeviceConfiguration.PINCode);
memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, sizeof(PINCodeRequestParams.PINCode));
/* Send the command to transmit the device's local PIN number for authentication */
Bluetooth_SendHCICommand(&PINCodeRequestParams, sizeof(BT_HCICommand_PinCodeResp_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
}
}
static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLength)
{
/* Need to reserve the amount of bytes given in the header for the complete payload */
uint8_t CommandBuffer[sizeof(HCICommandHeader) + HCICommandHeader.ParameterLength];
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_DEVICE),
.bRequest = 0,
.wValue = 0,
.wIndex = 0,
.wLength = sizeof(CommandBuffer)
};
/* Copy over the HCI command header to the allocated buffer */
memcpy(CommandBuffer, &HCICommandHeader, sizeof(HCICommandHeader));
/* Zero out the parameter section of the response to ensure that any padding bytes do not expose private RAM contents */
memset(&CommandBuffer[sizeof(HCICommandHeader)], 0x00, HCICommandHeader.ParameterLength);
/* Copy over the command parameters (if any) to the command buffer - note, the number of actual source parameter bytes
may differ to those in the header; any difference in length is filled with 0x00 padding bytes */
memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParameterLength);
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(CommandBuffer);
}