You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/singa
Drashna Jaelre b05c0e46c6
Adds a default value for IS_COMMAND for COMMAND feature (#4301)
6 years ago
..
keymaps Adding Singa Repo w/ Config Support (#3155) 6 years ago
config.h Adds a default value for IS_COMMAND for COMMAND feature (#4301) 6 years ago
i2c.c Adding Singa Repo w/ Config Support (#3155) 6 years ago
i2c.h Adding Singa Repo w/ Config Support (#3155) 6 years ago
info.json Fixsingakeymaps (#3156) 6 years ago
matrix.c Adding Singa Repo w/ Config Support (#3155) 6 years ago
readme.md Modified URLs to point to new locations 6 years ago
rules.mk Adding Singa Repo w/ Config Support (#3155) 6 years ago
singa.c Adding Singa Repo w/ Config Support (#3155) 6 years ago
singa.h Adding Singa Repo w/ Config Support (#3155) 6 years ago
usbconfig.h Adding Singa Repo w/ Config Support (#3155) 6 years ago

readme.md

Singa

Singa

A short description of the keyboard/project

Keyboard Maintainer: amnesia0287
Hardware Supported: TGR-Elaine v1.0 PCB
Hardware Availability: http://singakbd.com/

Make example for this keyboard (after setting up your build environment):

make singa:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python
    brew install pyusb
    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See build environment setup then the make instructions for more information.