MechMerlin
ce122c4981
* move tv44 to thevankeyboards directory * move bananasplit to thevankeyboards * move roadkit to thevankeyboards directory * add a basic readme * update readmes to correct the make instructions and add more help text * rename tv44 to minivan as per Jack's suggestions * update readme * rename tv44 to minivan * update tv44 to minivan * change includes for tv44 to minivan * remove extra includes |
6 years ago | |
---|---|---|
.. | ||
README.md | Keyboard: Shuffle keyboards into thevankeyboards directory (#3895) | 6 years ago |
keymap.c | Keyboard: Shuffle keyboards into thevankeyboards directory (#3895) | 6 years ago |
README.md
rask's BananaSplit60
Notes
Layers
Base layer is a regular HHKBish ANSI layer. Toggling the alternate base layer (Fn3) makes it simpler to play games with the left space being set to be an actual Space.
Layer 1 (Fn1) contains usual 60% functionalities such as the F-row, while Layer 2 (Fn2) contains media controls.
The final layer (Fn4) is a special layer that acts as a lock layer, meaning the keyboard is locked while the layer is active. This firmware assumes a lock switch (read below).
Lock switches
1.25u between the split space halves and the 1u key right
left of LeftArrow are to be operated with a lock switch.
If you don't have lock switches you should swap the MO()
calls with TG()
calls to make the layer toggles work
with regular non/locking switches.
How to make and flash
(These instructions are for Linux-based operating systems
with dfu-programmer
available.)
cd
into the bananasplit
keyboard's directory and run
make rask
which should result in a file called bananasplit_rask.hex
appearing
in your QMK root directory.
Now plug in your BananaSplit60 keyboard via USB. Verify
with lsusb
that it appears. At least my PCB did not have
anything preflashed so you should see atmega32u4
or similar
in the lsusb
output.
Now you can flash the firmware by
$ sudo dfu-programmer atmega32u4 erase
$ cd /qmk_firmware/root/directory
$ sudo dfu-programmer atmega32u4 flash bananasplit_rask.hex
If you happen to have some other atmega32u4
based device
I suggest you plug it out before flashing your BS60 just to
prevent accidentally flashing your old device.