![]() |
6 years ago | |
---|---|---|
.. | ||
keymaps/default | 7 years ago | |
README.md | 6 years ago | |
bmini.h | 7 years ago | |
config.h | 7 years ago | |
i2c.c | 7 years ago | |
i2c.h | 7 years ago | |
matrix.c | 6 years ago | |
program | 6 years ago | |
ps2avrGB.c | 6 years ago | |
ps2avrGB.h | 7 years ago | |
rules.mk | 7 years ago | |
usbconfig.h | 8 years ago |
README.md
ps2avrGB keyboard firmware
This is a port of the QMK firmware for boards that are based on the ps2avrGB firmware, like the ps2avrGB keyboard or the ones sold by Winkeyless.
Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the USB report options are supported.
This is an example based on the b.mini keyboard for making other keyboards compatible with QMK; fully supported boards have their own directory.
Supported Boards
Installing
First, install the requirements. These commands are for OSX, but all you
need is the AVR toolchain and bootloadHID
for flashing:
$ brew cask install crosspack-avr
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
In order to use the ./program
script, which can reboot the board into
the bootloader, you'll need Python 2 with PyUSB installed:
$ pip install pyusb
Then, with the keyboard plugged in, simply run this command from the
qmk_firmware
directory:
$ make ps2avrGB:program
If you prefer, you can just build it and flash the firmware directly with
bootloadHID
if you boot the board while holding down L_Ctrl
to keep it
in the bootloader:
$ make ps2avrGB
$ bootloadHID -r ps2avrGB_default.hex
Setting the board to bootloader mode
If you're lucky, the programming script does this automagically for you. If however this doesn't work for you, you need to enter the bootloader mode manually by plugging the keyboard in while holding the bootloader key. If you did this correctly the LEDs will blink and you'll be able to flash your firmware.
The bootloader key is the top left key of your matrix. For a standard board
from winkeyless.kr this is L_Ctrl
, but for some custom boards running ps2avrGB
this might be different. For the Pearl it's Esc
, for a b.fake it is q
. If
you're unsure you should be able to see the key in the bootmapper client.
Troubleshooting
From my experience, it's really hard to brick these boards. But these tricks have been useful when it got stuck in a weird scenario.
- Try plugging the board in while holding the bootloader key. This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware.
- Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub.