You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/lets_split/keymaps/OLED_sample
ishtob 80270a2791
Add files via upload
8 years ago
..
Makefile Add files via upload 8 years ago
config.h Add files via upload 8 years ago
keymap.c Add files via upload 8 years ago
readme.md Add files via upload 8 years ago

readme.md

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

  • I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
  • OLED display will connect from either side

Wiring

The wiring for i2c:

i2c wiring

The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.

Work in progress...

OLED Configuration

Work in progress...