You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/CDCHost/ConfigDescriptor.c

213 lines
8.9 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
* needed to communication with an attached USB device. Descriptors are special computer-readable structures
* which the host requests upon device enumeration, to determine the device's capabilities and functions.
*/
#include "ConfigDescriptor.h"
/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
* routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
* with compatible devices.
*
* This routine searches for a CDC interface descriptor containing bulk data IN and OUT endpoints, and an interrupt event endpoint.
*
* \return An error code from the CDCHost_GetConfigDescriptorDataCodes_t enum.
*/
uint8_t ProcessConfigurationDescriptor(void)
{
uint8_t* ConfigDescriptorData;
uint16_t ConfigDescriptorSize;
uint8_t FoundEndpoints = 0;
/* Get Configuration Descriptor size from the device */
if (USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, NULL) != HOST_SENDCONTROL_Successful)
return ControlError;
/* Ensure that the Configuration Descriptor isn't too large */
if (ConfigDescriptorSize > MAX_CONFIG_DESCRIPTOR_SIZE)
return DescriptorTooLarge;
/* Allocate enough memory for the entire config descriptor */
ConfigDescriptorData = alloca(ConfigDescriptorSize);
/* Retrieve the entire configuration descriptor into the allocated buffer */
USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, ConfigDescriptorData);
/* Validate returned data - ensure first entry is a configuration header descriptor */
if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
return InvalidConfigDataReturned;
/* Get the CDC interface from the configuration descriptor */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, NextCDCInterface))
{
/* Descriptor not found, error out */
return NoCDCInterfaceFound;
}
/* Get the IN and OUT data endpoints for the CDC interface */
while (FoundEndpoints != ((1 << CDC_NOTIFICATIONPIPE) | (1 << CDC_DATAPIPE_IN) | (1 << CDC_DATAPIPE_OUT)))
{
/* Fetch the next bulk or interrupt endpoint from the current CDC interface */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
NextInterfaceCDCDataEndpoint))
{
/* Get the next CDC interface from the configuration descriptor (CDC class has two CDC interfaces) */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, NextCDCInterface))
{
/* Descriptor not found, error out */
return NoCDCInterfaceFound;
}
/* Fetch the next bulk or interrupt endpoint from the current CDC interface */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
NextInterfaceCDCDataEndpoint))
{
/* Descriptor not found, error out */
return NoEndpointFound;
}
}
USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
/* Check if the found endpoint is a interrupt or bulk type descriptor */
if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
{
/* If the endpoint is a IN type interrupt endpoint */
if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
{
/* Configure the notification pipe */
Pipe_ConfigurePipe(CDC_NOTIFICATIONPIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
Pipe_SetInfiniteINRequests();
Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS);
/* Set the flag indicating that the notification pipe has been found */
FoundEndpoints |= (1 << CDC_NOTIFICATIONPIPE);
}
}
else
{
/* Check if the endpoint is a bulk IN or bulk OUT endpoint */
if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
{
/* Configure the data IN pipe */
Pipe_ConfigurePipe(CDC_DATAPIPE_IN, EP_TYPE_BULK, PIPE_TOKEN_IN,
EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
Pipe_SetInfiniteINRequests();
Pipe_Unfreeze();
/* Set the flag indicating that the data IN pipe has been found */
FoundEndpoints |= (1 << CDC_DATAPIPE_IN);
}
else
{
/* Configure the data OUT pipe */
Pipe_ConfigurePipe(CDC_DATAPIPE_OUT, EP_TYPE_BULK, PIPE_TOKEN_OUT,
EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
Pipe_Unfreeze();
/* Set the flag indicating that the data OUT pipe has been found */
FoundEndpoints |= (1 << CDC_DATAPIPE_OUT);
}
}
}
/* Valid data found, return success */
return SuccessfulConfigRead;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Interface descriptor of the correct CDC Class, Subclass and Protocol values.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
DESCRIPTOR_COMPARATOR(NextCDCInterface)
{
if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
{
/* Check the CDC descriptor class, subclass and protocol, break out if correct control interface found */
if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == CDC_CONTROL_CLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == CDC_CONTROL_SUBCLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == CDC_CONTROL_PROTOCOL))
{
return Descriptor_Search_Found;
}
/* Check the CDC descriptor class, subclass and protocol, break out if correct data interface found */
if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == CDC_DATA_CLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == CDC_DATA_SUBCLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == CDC_DATA_PROTOCOL))
{
return Descriptor_Search_Found;
}
}
return Descriptor_Search_NotFound;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next bulk IN or OUT endpoint, or interrupt IN endpoint within the current interface,
* aborting the search if another interface descriptor is found before the required endpoint (so that it may be compared
* using a different comparator to determine if it is another CDC class interface).
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
DESCRIPTOR_COMPARATOR(NextInterfaceCDCDataEndpoint)
{
if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)
{
uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor,
USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK);
if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT))
return Descriptor_Search_Found;
}
else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
{
return Descriptor_Search_Fail;
}
return Descriptor_Search_NotFound;
}