You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboard/nerd
Ralf Schmitt d9b5f5110e
Added NerD 60% support
10 years ago
..
Makefile Added NerD 60% support 10 years ago
README.md Added NerD 60% support 10 years ago
backlight.c Added NerD 60% support 10 years ago
backlight.h Added NerD 60% support 10 years ago
config.h Added NerD 60% support 10 years ago
keymap_ansi150.c Added NerD 60% support 10 years ago
keymap_common.c Added NerD 60% support 10 years ago
keymap_common.h Added NerD 60% support 10 years ago
led.c Added NerD 60% support 10 years ago
matrix.c Added NerD 60% support 10 years ago

README.md

NerD keyboard firmware

Korean Keyboard designed by GON.

Note that this is not the official firmware

Hardware revision

This firmware was developed and tested for NerD pcb version 1.61 and 2.0.

Supported features

  • All layout options are supported
  • All leds are supported

Changing Bootloader

You can't simply just upload this firmware to a new NerD board because the original bootloader won't accept DFU connections.

You can change the bootloader of the keyboard with an ISP programmer of your choice. The bootloader pins are easy to access on the NerD pcb.

Be aware that after changing the bootloader the official configuration software won't work anymore and you'll lose your warrenty. GON won't provide any support for this firmware.

Build

Move to this directory then just run make.

Jump to Bootloader

You can jump to bootloader by software if you have a macro defined for this in your keymap. The default command is (LSFT+RSFT+PAUS) to access the bootloader by software jump.