You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/AudioInput/AudioInput.c

232 lines
7.4 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the Audio Input demo. This file contains the main tasks of the demo and
* is responsible for the initial application hardware configuration.
*/
/* --- Project Configuration --- */
//#define MICROPHONE_BIASED_TO_HALF_RAIL
/* --- --- --- --- --- --- --- --- */
#include "AudioInput.h"
/* Project Tags, for reading out using the ButtLoad project */
BUTTLOADTAG(ProjName, "LUFA AudioIn App");
BUTTLOADTAG(BuildTime, __TIME__);
BUTTLOADTAG(BuildDate, __DATE__);
BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING);
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Audio_Task , TaskStatus: TASK_STOP },
};
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable Clock Division */
SetSystemClockPrescaler(0);
/* Hardware Initialization */
LEDs_Init();
ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
/* Start the ADC conversion in free running mode */
ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_CHANNEL);
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
/* Initialize Scheduler so that it can be used */
Scheduler_Init();
/* Initialize USB Subsystem */
USB_Init();
/* Scheduling - routine never returns, so put this last in the main function */
Scheduler_Start();
}
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
* configures the sample update and PWM timers.
*/
EVENT_HANDLER(USB_Connect)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
/* Indicate USB enumerating */
UpdateStatus(Status_USBEnumerating);
/* Sample reload timer initialization */
OCR0A = (F_CPU / AUDIO_SAMPLE_FREQUENCY);
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS00); // Fcpu speed
}
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
*/
EVENT_HANDLER(USB_Disconnect)
{
/* Stop the sample reload timer */
TCCR0B = 0;
/* Stop running audio and USB management tasks */
Scheduler_SetTaskMode(USB_Audio_Task, TASK_STOP);
Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
}
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured.
*/
EVENT_HANDLER(USB_ConfigurationChanged)
{
/* Setup audio stream endpoint */
Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS,
ENDPOINT_DIR_IN, AUDIO_STREAM_EPSIZE,
ENDPOINT_BANK_DOUBLE);
/* Indicate USB connected and ready */
UpdateStatus(Status_USBReady);
}
/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
* control requests that are not handled internally by the USB library (including the Audio class-specific
* requests) so that they can be handled appropriately for the application.
*/
EVENT_HANDLER(USB_UnhandledControlPacket)
{
/* Process General and Audio specific control requests */
switch (bRequest)
{
case REQ_SetInterface:
/* Set Interface is not handled by the library, as its function is application-specific */
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))
{
uint16_t wValue = Endpoint_Read_Word_LE();
Endpoint_ClearSetupReceived();
/* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
if (wValue)
{
/* Start audio task */
Scheduler_SetTaskMode(USB_Audio_Task, TASK_RUN);
}
else
{
/* Stop audio task */
Scheduler_SetTaskMode(USB_Audio_Task, TASK_STOP);
}
/* Handshake the request */
Endpoint_ClearSetupIN();
}
break;
}
}
/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
* log to a serial port, or anything else that is suitable for status updates.
*
* \param CurrentStatus Current status of the system, from the AudioInput_StatusCodes_t enum
*/
void UpdateStatus(uint8_t CurrentStatus)
{
uint8_t LEDMask = LEDS_NO_LEDS;
/* Set the LED mask to the appropriate LED mask based on the given status code */
switch (CurrentStatus)
{
case Status_USBNotReady:
LEDMask = (LEDS_LED1);
break;
case Status_USBEnumerating:
LEDMask = (LEDS_LED1 | LEDS_LED2);
break;
case Status_USBReady:
LEDMask = (LEDS_LED2 | LEDS_LED4);
break;
}
/* Set the board LEDs to the new LED mask */
LEDs_SetAllLEDs(LEDMask);
}
/** Task to manage the Audio interface, reading in ADC samples from the microphone, and them to the host. */
TASK(USB_Audio_Task)
{
/* Select the audio stream endpoint */
Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM);
/* Check if the current endpoint can be read from (contains a packet) and that the next sample should be stored */
if (Endpoint_ReadWriteAllowed() && (TIFR0 & (1 << OCF0A)))
{
/* Clear the sample reload timer */
TIFR0 |= (1 << OCF0A);
/* Audio sample is ADC value scaled to fit the entire range */
int16_t AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
AudioSample -= (SAMPLE_MAX_RANGE / 2));
#endif
/* Write the sample to the buffer */
Endpoint_Write_Word_LE(AudioSample);
/* Check to see if the bank is now full */
if (!(Endpoint_ReadWriteAllowed()))
{
/* Send the full packet to the host */
Endpoint_ClearCurrentBank();
}
}
}