You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
418 lines
16 KiB
418 lines
16 KiB
/*
|
|
LUFA Library
|
|
Copyright (C) Dean Camera, 2012.
|
|
|
|
dean [at] fourwalledcubicle [dot] com
|
|
www.lufa-lib.org
|
|
*/
|
|
|
|
/*
|
|
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
|
|
|
Permission to use, copy, modify, distribute, and sell this
|
|
software and its documentation for any purpose is hereby granted
|
|
without fee, provided that the above copyright notice appear in
|
|
all copies and that both that the copyright notice and this
|
|
permission notice and warranty disclaimer appear in supporting
|
|
documentation, and that the name of the author not be used in
|
|
advertising or publicity pertaining to distribution of the
|
|
software without specific, written prior permission.
|
|
|
|
The author disclaim all warranties with regard to this
|
|
software, including all implied warranties of merchantability
|
|
and fitness. In no event shall the author be liable for any
|
|
special, indirect or consequential damages or any damages
|
|
whatsoever resulting from loss of use, data or profits, whether
|
|
in an action of contract, negligence or other tortious action,
|
|
arising out of or in connection with the use or performance of
|
|
this software.
|
|
*/
|
|
|
|
/** \file
|
|
*
|
|
* RFCOMM layer module. This module manages the RFCOMM layer of the
|
|
* stack, providing virtual serial port channels on top of the lower
|
|
* L2CAP layer.
|
|
*/
|
|
|
|
#define INCLUDE_FROM_RFCOMM_C
|
|
#include "RFCOMM.h"
|
|
|
|
/** 8-Bit CRC table used by the FCS field of each RFCOMM encoded frame, sourced from the ETSI TS 101 369 V7.2.0
|
|
* specification document, upon which the RFCOMM specification is based.
|
|
*/
|
|
const uint8_t CRC8_Table[256] PROGMEM =
|
|
{
|
|
0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
|
|
0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
|
|
0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
|
|
0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
|
|
0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
|
|
0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
|
|
0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
|
|
0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
|
|
0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
|
|
0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
|
|
0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
|
|
0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
|
|
0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
|
|
0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
|
|
0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
|
|
0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
|
|
};
|
|
|
|
/** RFCOMM channel state structure, to retain information about each open channel in the RFCOMM multiplexer. */
|
|
RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS];
|
|
|
|
|
|
/** Initializes the RFCOMM service, ready for new connections from a SDP client. */
|
|
void RFCOMM_Initialize(void)
|
|
{
|
|
/* Reset the RFCOMM channel structures, to invalidate any configured RFCOMM channels */
|
|
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
|
|
RFCOMM_Channels[i].State = RFCOMM_Channel_Closed;
|
|
}
|
|
|
|
/** Services all the logical RFCOMM channels on the given ACL channel, sending any RFCOMM control requests to
|
|
* the remote device as needed to establish new logical RFCOMM channels. This function should be called repeatedly
|
|
* in the main program loop when an ACL channel with an RFCOMM PSM has been established between the local and remote
|
|
* device.
|
|
*
|
|
* \param[in] ACLChannel ACL channel which has been previously opened to handle RFCOMM traffic between devices
|
|
*/
|
|
void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
/* Abort if the RFCOMM ACL channel is not currently open */
|
|
if ((ACLChannel == NULL) || (ACLChannel->State != BT_Channel_Open))
|
|
return;
|
|
|
|
/* Loop through each of the RFCOMM channels, send any required RFCOMM control commands */
|
|
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
|
|
{
|
|
RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i];
|
|
|
|
if (RFCOMMChannel->State == RFCOMM_Channel_Configure)
|
|
{
|
|
/* Check if the local signals have not yet been sent on the current channel */
|
|
if (!(RFCOMMChannel->ConfigFlags & RFCOMM_CONFIG_LOCALSIGNALSSENT))
|
|
{
|
|
/* Indicate that the local signals have been sent, transmit them to the remote device */
|
|
RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_LOCALSIGNALSSENT;
|
|
RFCOMM_SendChannelSignals(RFCOMMChannel, ACLChannel);
|
|
}
|
|
|
|
/* If signals have been configured in both directions, progress to the open state */
|
|
if ((RFCOMMChannel->ConfigFlags & (RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS)) ==
|
|
(RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS))
|
|
{
|
|
RFCOMMChannel->State = RFCOMM_Channel_Open;
|
|
RFCOMM_ChannelOpened(RFCOMMChannel);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/** Processes an incoming RFCOMM packet on an ACL channel which has been previously opened between the local and
|
|
* a remote device to handle RFCOMM traffic.
|
|
*
|
|
* \param[in] Data Incoming packet data containing the RFCOMM packet
|
|
* \param[in] ACLChannel ACL channel the request was issued to by the remote device
|
|
*/
|
|
void RFCOMM_ProcessPacket(void* Data,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data;
|
|
const uint8_t* FrameData = (const uint8_t*)Data + sizeof(RFCOMM_Header_t);
|
|
uint16_t FrameDataLen = RFCOMM_GetVariableFieldValue(&FrameData);
|
|
|
|
/* Decode the RFCOMM frame type from the header */
|
|
switch (FrameHeader->Control & ~FRAME_POLL_FINAL)
|
|
{
|
|
case RFCOMM_Frame_DM:
|
|
RFCOMM_ProcessDM(&FrameHeader->Address, ACLChannel);
|
|
break;
|
|
case RFCOMM_Frame_DISC:
|
|
RFCOMM_ProcessDISC(&FrameHeader->Address, ACLChannel);
|
|
break;
|
|
case RFCOMM_Frame_SABM:
|
|
RFCOMM_ProcessSABM(&FrameHeader->Address, ACLChannel);
|
|
break;
|
|
case RFCOMM_Frame_UA:
|
|
RFCOMM_ProcessUA(&FrameHeader->Address, ACLChannel);
|
|
break;
|
|
case RFCOMM_Frame_UIH:
|
|
RFCOMM_ProcessUIH(&FrameHeader->Address, FrameDataLen, FrameData, ACLChannel);
|
|
break;
|
|
default:
|
|
BT_RFCOMM_DEBUG(1, "<< Unknown Frame Received");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** Sends an RFCOMM notification to the remote device that the local terminal control signals (located in the
|
|
* "Local" structure of the RFCOMM channel) have changed, pushing the new signals to the remote device.
|
|
*
|
|
* \param[in] RFCOMMChannel RFCOMM logical channel whose local terminal signals have changed
|
|
* \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices
|
|
*/
|
|
void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
BT_RFCOMM_DEBUG(1, ">> MSC Command");
|
|
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI);
|
|
|
|
struct
|
|
{
|
|
RFCOMM_Command_t CommandHeader;
|
|
uint8_t Length;
|
|
RFCOMM_MSC_Parameters_t Params;
|
|
} MSCommand;
|
|
|
|
MSCommand.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = true};
|
|
MSCommand.Length = (sizeof(MSCommand.Params) << 1) | 0x01;
|
|
MSCommand.Params.Channel = (RFCOMM_Address_t){.DLCI = RFCOMMChannel->DLCI, .EA = true, .CR = true};
|
|
MSCommand.Params.Signals = RFCOMMChannel->Local.Signals;
|
|
MSCommand.Params.BreakSignal = RFCOMMChannel->Local.BreakSignal;
|
|
|
|
/* Send the MSC command to the remote device */
|
|
RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel);
|
|
}
|
|
|
|
/** Sends new data through an open logical RFCOMM channel. This should be used to transmit data through a
|
|
* RFCOMM channel once it has been opened.
|
|
*
|
|
* \param[in] DataLen Length of the RFCOMM data to send, in bytes
|
|
* \param[in] Data Pointer to a buffer where the data to send is located
|
|
* \param[in] RFCOMMChannel RFCOMM logical channel which is to be transmitted to
|
|
* \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices
|
|
*/
|
|
void RFCOMM_SendData(const uint16_t DataLen,
|
|
const uint8_t* Data,
|
|
const RFCOMM_Channel_t* const RFCOMMChannel,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
if (RFCOMMChannel->State != RFCOMM_Channel_Open)
|
|
return;
|
|
|
|
BT_RFCOMM_DEBUG(1, ">> UIH Frame");
|
|
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI);
|
|
|
|
/* Send the MSC command to the remote device */
|
|
RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel);
|
|
}
|
|
|
|
RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI)
|
|
{
|
|
/* Find a free entry in the RFCOMM channel multiplexer state array */
|
|
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
|
|
{
|
|
RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i];
|
|
|
|
/* If the channel's state is closed, the channel state entry is free */
|
|
if (RFCOMMChannel->State == RFCOMM_Channel_Closed)
|
|
{
|
|
RFCOMMChannel->DLCI = DLCI;
|
|
RFCOMMChannel->State = RFCOMM_Channel_Configure;
|
|
RFCOMMChannel->Priority = 7 + (RFCOMMChannel->DLCI & 0xF8);
|
|
RFCOMMChannel->MTU = 0xFFFF;
|
|
RFCOMMChannel->Remote.Signals = 0 | (1 << 0);
|
|
RFCOMMChannel->Remote.BreakSignal = 0 | (1 << 0);
|
|
RFCOMMChannel->Local.Signals = RFCOMM_SIGNAL_RTC | RFCOMM_SIGNAL_RTR | RFCOMM_SIGNAL_DV | (1 << 0);
|
|
RFCOMMChannel->Local.BreakSignal = 0 | (1 << 0);
|
|
RFCOMMChannel->ConfigFlags = 0;
|
|
|
|
return RFCOMMChannel;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
RFCOMM_Channel_t* RFCOMM_GetChannelData(const uint8_t DLCI)
|
|
{
|
|
/* Search through the RFCOMM channel list, looking for the specified channel */
|
|
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
|
|
{
|
|
RFCOMM_Channel_t* CurrRFCOMMChannel = &RFCOMM_Channels[i];
|
|
|
|
/* If the current non-closed channel's DLCI matches the search DLCI, return it to the caller */
|
|
if ((CurrRFCOMMChannel->State != RFCOMM_Channel_Closed) && (CurrRFCOMMChannel->DLCI == DLCI))
|
|
return CurrRFCOMMChannel;
|
|
}
|
|
|
|
/* Channel not found in the channel state table, return failure */
|
|
return NULL;
|
|
}
|
|
|
|
uint16_t RFCOMM_GetVariableFieldValue(const uint8_t** BufferPos)
|
|
{
|
|
uint8_t FirstOctet;
|
|
uint8_t SecondOctet = 0;
|
|
|
|
FirstOctet = **BufferPos;
|
|
(*BufferPos)++;
|
|
|
|
/* If the field size is more than a single byte, fetch the next byte in the variable length field */
|
|
if (!(FirstOctet & 0x01))
|
|
{
|
|
SecondOctet = **BufferPos;
|
|
(*BufferPos)++;
|
|
|
|
/* Discard any remaining bytes in the variable length field that won't fit in the return value */
|
|
while (!(**BufferPos & 0x01))
|
|
(*BufferPos)++;
|
|
}
|
|
|
|
/* Bit-shift the bytes that comprise the variable length field so that they form a single integer */
|
|
return (((uint16_t)SecondOctet << 7) | FirstOctet >> 1);
|
|
}
|
|
|
|
void RFCOMM_SendFrame(const uint8_t DLCI,
|
|
const bool CommandResponse,
|
|
const uint8_t Control,
|
|
const uint16_t DataLen,
|
|
const void* Data,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
struct
|
|
{
|
|
RFCOMM_Header_t FrameHeader;
|
|
uint8_t Size[(DataLen < 128) ? 1 : 2];
|
|
uint8_t Data[DataLen];
|
|
uint8_t FCS;
|
|
} ResponsePacket;
|
|
|
|
/* Set the frame header values to the specified address and frame type */
|
|
ResponsePacket.FrameHeader.Control = Control;
|
|
ResponsePacket.FrameHeader.Address = (RFCOMM_Address_t){.DLCI = DLCI, .EA = true, .CR = CommandResponse};
|
|
|
|
/* Set the lower 7 bits of the packet length */
|
|
ResponsePacket.Size[0] = (DataLen << 1);
|
|
|
|
/* Terminate the size field if size is 7 bits or lower, otherwise set the upper 8 bits of the length */
|
|
if (DataLen < 128)
|
|
ResponsePacket.Size[0] |= 0x01;
|
|
else
|
|
ResponsePacket.Size[1] = (DataLen >> 7);
|
|
|
|
/* Copy over the packet data from the source buffer to the response packet buffer */
|
|
memcpy(ResponsePacket.Data, Data, DataLen);
|
|
|
|
/* Determine the length of the frame which is to be used to calculate the CRC value */
|
|
uint8_t CRCLength = sizeof(ResponsePacket.FrameHeader);
|
|
|
|
/* UIH frames do not have the CRC calculated on the Size field in the response, all other frames do */
|
|
if ((Control & ~FRAME_POLL_FINAL) != RFCOMM_Frame_UIH)
|
|
CRCLength += sizeof(ResponsePacket.Size);
|
|
|
|
/* Calculate the frame checksum from the appropriate fields */
|
|
ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, CRCLength);
|
|
|
|
/* Send the completed response packet to the sender */
|
|
Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), ACLChannel);
|
|
}
|
|
|
|
static uint8_t RFCOMM_GetFCSValue(const void* FrameStart,
|
|
uint8_t Length)
|
|
{
|
|
uint8_t FCS = 0xFF;
|
|
|
|
/* Calculate new Frame CRC value via the given data bytes and the CRC table */
|
|
for (uint8_t i = 0; i < Length; i++)
|
|
FCS = pgm_read_byte(&CRC8_Table[FCS ^ ((const uint8_t*)FrameStart)[i]]);
|
|
|
|
return ~FCS;
|
|
}
|
|
|
|
static void RFCOMM_ProcessDM(const RFCOMM_Address_t* const FrameAddress,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
BT_RFCOMM_DEBUG(1, "<< DM Received");
|
|
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
|
|
}
|
|
|
|
static void RFCOMM_ProcessDISC(const RFCOMM_Address_t* const FrameAddress,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
BT_RFCOMM_DEBUG(1, "<< DISC Received");
|
|
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
|
|
|
|
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
|
|
|
|
/* If the requested channel is currently open, destroy it */
|
|
if (RFCOMMChannel != NULL)
|
|
RFCOMMChannel->State = RFCOMM_Channel_Closed;
|
|
|
|
BT_RFCOMM_DEBUG(1, ">> UA Sent");
|
|
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
|
|
}
|
|
|
|
static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
BT_RFCOMM_DEBUG(1, "<< SABM Received");
|
|
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
|
|
|
|
if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI)
|
|
{
|
|
BT_RFCOMM_DEBUG(1, ">> UA Sent");
|
|
|
|
/* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
|
|
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Find the existing channel's entry in the channel table */
|
|
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
|
|
|
|
/* Existing entry not found, create a new entry for the channel */
|
|
if (RFCOMMChannel == NULL)
|
|
RFCOMMChannel = RFCOMM_GetFreeChannelEntry(FrameAddress->DLCI);
|
|
|
|
/* If space was found in the channel table for the new channel, ACK the request */
|
|
if (RFCOMMChannel != NULL)
|
|
{
|
|
BT_RFCOMM_DEBUG(1, ">> UA Sent");
|
|
|
|
/* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
|
|
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
|
|
}
|
|
else
|
|
{
|
|
BT_RFCOMM_DEBUG(1, ">> DM Sent");
|
|
|
|
/* No free channel in the multiplexer - decline the SABM by sending a DM frame */
|
|
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_DM | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
|
|
}
|
|
}
|
|
|
|
static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
BT_RFCOMM_DEBUG(1, "<< UA Received");
|
|
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
|
|
}
|
|
|
|
static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress,
|
|
const uint16_t FrameLength,
|
|
const uint8_t* FrameData,
|
|
Bluetooth_Channel_t* const ACLChannel)
|
|
{
|
|
if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI)
|
|
{
|
|
RFCOMM_ProcessControlCommand(FrameData, ACLChannel);
|
|
return;
|
|
}
|
|
|
|
BT_RFCOMM_DEBUG(1, "<< UIH Received");
|
|
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
|
|
BT_RFCOMM_DEBUG(2, "-- Length 0x%02X", FrameLength);
|
|
|
|
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
|
|
|
|
if (RFCOMMChannel != NULL)
|
|
RFCOMM_DataReceived(RFCOMMChannel, FrameLength, FrameData);
|
|
}
|
|
|