You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Device/ClassDriver/USBtoSerial/USBtoSerial.txt

89 lines
2.8 KiB

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage USB to Serial Converter Demo (via CDC-ACM class)
*
* \section SSec_Compat Demo Compatibility:
*
* This demo is known to be compatible with the following microcontrollers:
*
* - AT90USB1287
* - AT90USB1286
* - AT90USB647
* - AT90USB646
* - ATMEGA32U6
* - ATMEGA32U4
* - ATMEGA16U4
* - AT90USB162
* - AT90USB82
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Communications Device Class (CDC)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Abstract Control Model (ACM)</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF CDC Class Standard</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Communications Device Class demonstration application.
* This gives a simple reference application for implementing
* a USB to Serial converter using the CDC class. Sent and
* received data on the serial port is communicated to the USB
* host.
*
* After running this demo for the first time on a new computer,
* you will need to supply the .INF file located in this demo
* project's directory as the device's driver when running under
* Windows. This will enable Windows to use its inbuilt CDC drivers,
* negating the need for custom drivers for the device. Other
* Operating Systems should automatically use their own inbuilt
* CDC-ACM drivers.
*
* On 64 bit versions of Windows, the OS requires all drivers to
* be digitally signed before it will allow them to be installed. As
* Windows' own CDC driver (which the supplied INF file references)
* is not signed, you will need to reboot, press F8 before Windows
* begins to load and select "Disable Driver Signature Enforcement"
* to allow the CDC driver to install.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td><b>Define Name:</b></td>
* <td><b>Location:</b></td>
* <td><b>Description:</b></td>
* </tr>
* <tr>
* <td>BUFF_STATICSIZE</td>
* <td>RingBuff.h</td>
* <td>Defines the maximum number of bytes which can be buffered in each Ring Buffer.</td>
* </tr>
* </table>
*/