You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/gray_studio/hb85
matth 3882ceefc1
updaded matt xd87
5 years ago
..
keymaps [Keyboard] HB85 Refactor/Layout Addition (#5451) 6 years ago
config.h [Keyboard] Refactor HB85 to get rid of custom i2c code (#5570) 6 years ago
hb85.c [Keyboard] Refactor HB85 to get rid of custom i2c code (#5570) 6 years ago
hb85.h [Keyboard] HB85 Refactor/Layout Addition (#5451) 6 years ago
info.json [Keyboard] HB85 Refactor/Layout Addition (#5451) 6 years ago
readme.md [Keyboard] Refactor HB85 to get rid of custom i2c code (#5570) 6 years ago
rules.mk updaded matt xd87 5 years ago
usbconfig.h [Keyboard] Refactor HB85 to get rid of custom i2c code (#5570) 6 years ago

readme.md

Gray Studio HB85

Gray Studio HB85

A Sony HitBit MSX Computer inspired Keyboard.

Keyboard Maintainer: Felipe Coury
Hardware Supported: Gray Studio HB85
Hardware Availability: Group buy finished

Make example for this keyboard (after setting up your build environment):

make gray_studio/hb85:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as F3 while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

Please Note: You will need to use the EEP_RST keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.