You can not select more than 25 topics
			Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
		
		
		
		
		
			
		
			
				
					
					
						
							210 lines
						
					
					
						
							6.3 KiB
						
					
					
				
			
		
		
	
	
							210 lines
						
					
					
						
							6.3 KiB
						
					
					
				#include QMK_KEYBOARD_H
 | 
						|
#include "i2cmaster.h"
 | 
						|
 | 
						|
 | 
						|
extern inline void ergodox_board_led_on(void);
 | 
						|
extern inline void ergodox_right_led_1_on(void);
 | 
						|
extern inline void ergodox_right_led_2_on(void);
 | 
						|
extern inline void ergodox_right_led_3_on(void);
 | 
						|
extern inline void ergodox_right_led_on(uint8_t led);
 | 
						|
 | 
						|
extern inline void ergodox_board_led_off(void);
 | 
						|
extern inline void ergodox_right_led_1_off(void);
 | 
						|
extern inline void ergodox_right_led_2_off(void);
 | 
						|
extern inline void ergodox_right_led_3_off(void);
 | 
						|
extern inline void ergodox_right_led_off(uint8_t led);
 | 
						|
 | 
						|
extern inline void ergodox_led_all_on(void);
 | 
						|
extern inline void ergodox_led_all_off(void);
 | 
						|
 | 
						|
extern inline void ergodox_right_led_1_set(uint8_t n);
 | 
						|
extern inline void ergodox_right_led_2_set(uint8_t n);
 | 
						|
extern inline void ergodox_right_led_3_set(uint8_t n);
 | 
						|
extern inline void ergodox_right_led_set(uint8_t led, uint8_t n);
 | 
						|
 | 
						|
extern inline void ergodox_led_all_set(uint8_t n);
 | 
						|
 | 
						|
 | 
						|
bool i2c_initialized = 0;
 | 
						|
uint8_t mcp23018_status = 0x20;
 | 
						|
 | 
						|
void matrix_init_kb(void) {
 | 
						|
   // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
 | 
						|
    TCCR1A = 0b10101001;  // set and configure fast PWM
 | 
						|
    TCCR1B = 0b00001001;  // set and configure fast PWM
 | 
						|
 | 
						|
    // (tied to Vcc for hardware convenience)
 | 
						|
    DDRB  &= ~(1<<4);  // set B(4) as input
 | 
						|
    PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
 | 
						|
 | 
						|
    // unused pins - C7, D4, D5, D7, E6
 | 
						|
    // set as input with internal pull-up enabled
 | 
						|
    DDRC  &= ~(1<<7);
 | 
						|
    DDRD  &= ~(1<<5 | 1<<4);
 | 
						|
    DDRE  &= ~(1<<6);
 | 
						|
    PORTC |=  (1<<7);
 | 
						|
    PORTD |=  (1<<5 | 1<<4);
 | 
						|
    PORTE |=  (1<<6);
 | 
						|
 | 
						|
    ergodox_blink_all_leds();
 | 
						|
 | 
						|
    matrix_init_user();
 | 
						|
}
 | 
						|
 | 
						|
void ergodox_blink_all_leds(void)
 | 
						|
{
 | 
						|
    ergodox_led_all_off();
 | 
						|
    ergodox_led_all_set(LED_BRIGHTNESS_DEFAULT);
 | 
						|
    ergodox_right_led_1_on();
 | 
						|
    _delay_ms(50);
 | 
						|
    ergodox_right_led_2_on();
 | 
						|
    _delay_ms(50);
 | 
						|
    ergodox_right_led_3_on();
 | 
						|
    _delay_ms(50);
 | 
						|
#ifdef LEFT_LEDS
 | 
						|
    ergodox_left_led_1_on();
 | 
						|
    _delay_ms(50);
 | 
						|
    if (!mcp23018_status) {
 | 
						|
      mcp23018_status = ergodox_left_leds_update();
 | 
						|
    }
 | 
						|
    ergodox_left_led_2_on();
 | 
						|
    _delay_ms(50);
 | 
						|
    if (!mcp23018_status) {
 | 
						|
      mcp23018_status = ergodox_left_leds_update();
 | 
						|
    }
 | 
						|
    ergodox_left_led_3_on();
 | 
						|
    _delay_ms(50);
 | 
						|
    if (!mcp23018_status) {
 | 
						|
      mcp23018_status = ergodox_left_leds_update();
 | 
						|
    }
 | 
						|
#endif
 | 
						|
    ergodox_right_led_1_off();
 | 
						|
    _delay_ms(50);
 | 
						|
    ergodox_right_led_2_off();
 | 
						|
    _delay_ms(50);
 | 
						|
    ergodox_right_led_3_off();
 | 
						|
#ifdef LEFT_LEDS
 | 
						|
    _delay_ms(50);
 | 
						|
    ergodox_left_led_1_off();
 | 
						|
    if (!mcp23018_status) {
 | 
						|
      mcp23018_status = ergodox_left_leds_update();
 | 
						|
    }
 | 
						|
    _delay_ms(50);
 | 
						|
    ergodox_left_led_2_off();
 | 
						|
    if (!mcp23018_status) {
 | 
						|
      mcp23018_status = ergodox_left_leds_update();
 | 
						|
    }
 | 
						|
    _delay_ms(50);
 | 
						|
    ergodox_left_led_3_off();
 | 
						|
    if (!mcp23018_status) {
 | 
						|
      mcp23018_status = ergodox_left_leds_update();
 | 
						|
    }
 | 
						|
#endif
 | 
						|
    
 | 
						|
    //ergodox_led_all_on();
 | 
						|
    //_delay_ms(333);
 | 
						|
    ergodox_led_all_off();
 | 
						|
}
 | 
						|
 | 
						|
uint8_t init_mcp23018(void) {
 | 
						|
    mcp23018_status = 0x20;
 | 
						|
 | 
						|
    // I2C subsystem
 | 
						|
 | 
						|
    // uint8_t sreg_prev;
 | 
						|
    // sreg_prev=SREG;
 | 
						|
    // cli();
 | 
						|
    if (i2c_initialized == 0) {
 | 
						|
        i2c_init();  // on pins D(1,0)
 | 
						|
        i2c_initialized = true;
 | 
						|
        _delay_ms(1000);
 | 
						|
    }
 | 
						|
 | 
						|
    // set pin direction
 | 
						|
    // - unused  : input  : 1
 | 
						|
    // - input   : input  : 1
 | 
						|
    // - driving : output : 0
 | 
						|
    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(IODIRA);            if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
 | 
						|
    i2c_stop();
 | 
						|
 | 
						|
    // set pull-up
 | 
						|
    // - unused  : on  : 1
 | 
						|
    // - input   : on  : 1
 | 
						|
    // - driving : off : 0
 | 
						|
    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(GPPUA);             if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
 | 
						|
 | 
						|
out:
 | 
						|
    i2c_stop();
 | 
						|
 | 
						|
#ifdef LEFT_LEDS
 | 
						|
    if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update();
 | 
						|
#endif // LEFT_LEDS
 | 
						|
 | 
						|
    // SREG=sreg_prev;
 | 
						|
 | 
						|
    return mcp23018_status;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef LEFT_LEDS
 | 
						|
uint8_t ergodox_left_leds_update(void) {
 | 
						|
    if (mcp23018_status) { // if there was an error
 | 
						|
        return mcp23018_status;
 | 
						|
    }
 | 
						|
#define LEFT_LED_1_SHIFT        7       // in MCP23018 port B
 | 
						|
#define LEFT_LED_2_SHIFT        6       // in MCP23018 port B
 | 
						|
#define LEFT_LED_3_SHIFT        7       // in MCP23018 port A
 | 
						|
 | 
						|
    // set logical value (doesn't matter on inputs)
 | 
						|
    // - unused  : hi-Z : 1
 | 
						|
    // - input   : hi-Z : 1
 | 
						|
    // - driving : hi-Z : 1
 | 
						|
    mcp23018_status = i2c_start(I2C_ADDR_WRITE);
 | 
						|
    if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(OLATA);
 | 
						|
    if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(0b11111111
 | 
						|
                                & ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT)
 | 
						|
                                );
 | 
						|
    if (mcp23018_status) goto out;
 | 
						|
    mcp23018_status = i2c_write(0b11111111
 | 
						|
                                & ~(ergodox_left_led_2<<LEFT_LED_2_SHIFT)
 | 
						|
                                & ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT)
 | 
						|
                                );
 | 
						|
    if (mcp23018_status) goto out;
 | 
						|
 | 
						|
 out:
 | 
						|
    i2c_stop();
 | 
						|
    return mcp23018_status;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
 | 
						|
#ifdef ONEHAND_ENABLE
 | 
						|
__attribute__ ((weak))
 | 
						|
// swap-hands action needs a matrix to define the swap
 | 
						|
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
 | 
						|
    /* Left hand, matrix positions */
 | 
						|
    {{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}},
 | 
						|
    {{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}},
 | 
						|
    {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}},
 | 
						|
    {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}},
 | 
						|
    {{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
 | 
						|
    {{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
 | 
						|
    {{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
 | 
						|
    /* Right hand, matrix positions */
 | 
						|
    {{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
 | 
						|
    {{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
 | 
						|
    {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
 | 
						|
    {{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
 | 
						|
    {{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
 | 
						|
    {{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
 | 
						|
    {{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
 | 
						|
};
 | 
						|
#endif
 |