forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '0.6.435'
${ noResults }
qmk_firmware/keyboards/unikorn
History
MechMerlin d3ebf903c9
[Keyboard] Add Unikorn 60 tsangan_hhkb layout (#6390) 		5 years ago
..
keymaps [Keyboard] Add Unikorn 60 tsangan_hhkb layout (#6390) 5 years ago
config.h [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 5 years ago
info.json [Keyboard] Add Unikorn 60 tsangan_hhkb layout (#6390) 5 years ago
readme.md [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 5 years ago
rules.mk [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 5 years ago
unikorn.c [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 5 years ago
unikorn.h [Keyboard] Add Unikorn 60 tsangan_hhkb layout (#6390) 5 years ago
usbconfig.h [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 5 years ago

readme.md

Unikorn 60

60% PCB made for the TGR x SINGA Unikorn60.

Keyboard Maintainer: MechMerlin
Hardware Supported: Unikorn 60 PCB
Hardware Availability: Geekhack GB

Make example for this keyboard (after setting up your build environment):

make unikorn:default

This PCB can support RGB underglow. There are pads on the bottom of the PCB for the LED controller chip and for 17 RGB underglow LEDs. The Unikorn 60 case does not have acrylic pieces to properly display underglow effects.

To enable RGB lighting support, install the necessary components and set RGBLIGHT features in rules.mk like so:

RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Short the two holes labeled FW_JP beside the Tab key. At this time there is no reset key to press.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

  2. Install crosspack-avr.

    brew cask install crosspack-avr

  3. Install the following packages:

    brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.