You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
271 lines
7.6 KiB
271 lines
7.6 KiB
/*!
|
|
\file gd32vf103_pmu.c
|
|
\brief PMU driver
|
|
|
|
\version 2019-06-05, V1.0.0, firmware for GD32VF103
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "gd32vf103_pmu.h"
|
|
#include "riscv_encoding.h"
|
|
|
|
/*!
|
|
\brief reset PMU register
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_deinit(void)
|
|
{
|
|
/* reset PMU */
|
|
rcu_periph_reset_enable(RCU_PMURST);
|
|
rcu_periph_reset_disable(RCU_PMURST);
|
|
}
|
|
|
|
/*!
|
|
\brief select low voltage detector threshold
|
|
\param[in] lvdt_n:
|
|
only one parameter can be selected which is shown as below:
|
|
\arg PMU_LVDT_0: voltage threshold is 2.2V
|
|
\arg PMU_LVDT_1: voltage threshold is 2.3V
|
|
\arg PMU_LVDT_2: voltage threshold is 2.4V
|
|
\arg PMU_LVDT_3: voltage threshold is 2.5V
|
|
\arg PMU_LVDT_4: voltage threshold is 2.6V
|
|
\arg PMU_LVDT_5: voltage threshold is 2.7V
|
|
\arg PMU_LVDT_6: voltage threshold is 2.8V
|
|
\arg PMU_LVDT_7: voltage threshold is 2.9V
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_lvd_select(uint32_t lvdt_n)
|
|
{
|
|
/* disable LVD */
|
|
PMU_CTL &= ~PMU_CTL_LVDEN;
|
|
/* clear LVDT bits */
|
|
PMU_CTL &= ~PMU_CTL_LVDT;
|
|
/* set LVDT bits according to lvdt_n */
|
|
PMU_CTL |= lvdt_n;
|
|
/* enable LVD */
|
|
PMU_CTL |= PMU_CTL_LVDEN;
|
|
}
|
|
|
|
/*!
|
|
\brief disable PMU lvd
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_lvd_disable(void)
|
|
{
|
|
/* disable LVD */
|
|
PMU_CTL &= ~PMU_CTL_LVDEN;
|
|
}
|
|
|
|
/*!
|
|
\brief PMU work at sleep mode
|
|
\param[in] sleepmodecmd:
|
|
only one parameter can be selected which is shown as below:
|
|
\arg WFI_CMD: use WFI command
|
|
\arg WFE_CMD: use WFE command
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_to_sleepmode(uint8_t sleepmodecmd)
|
|
{
|
|
/* clear sleepdeep bit of RISC-V system control register */
|
|
clear_csr(0x811, 0x1);
|
|
|
|
/* select WFI or WFE command to enter sleep mode */
|
|
if(WFI_CMD == sleepmodecmd){
|
|
__WFI();
|
|
}else{
|
|
clear_csr(mstatus, MSTATUS_MIE);
|
|
set_csr(0x810, 0x1);
|
|
__WFI();
|
|
clear_csr(0x810, 0x1);
|
|
set_csr(mstatus, MSTATUS_MIE);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief PMU work at deepsleep mode
|
|
\param[in] ldo:
|
|
only one parameter can be selected which is shown as below:
|
|
\arg PMU_LDO_NORMAL: LDO work at normal power mode when pmu enter deepsleep mode
|
|
\arg PMU_LDO_LOWPOWER: LDO work at low power mode when pmu enter deepsleep mode
|
|
\param[in] deepsleepmodecmd:
|
|
only one parameter can be selected which is shown as below:
|
|
\arg WFI_CMD: use WFI command
|
|
\arg WFE_CMD: use WFE command
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_to_deepsleepmode(uint32_t ldo,uint8_t deepsleepmodecmd)
|
|
{
|
|
/* clear stbmod and ldolp bits */
|
|
PMU_CTL &= ~((uint32_t)(PMU_CTL_STBMOD | PMU_CTL_LDOLP));
|
|
/* set ldolp bit according to pmu_ldo */
|
|
PMU_CTL |= ldo;
|
|
/* set CSR_SLEEPVALUE bit of RISC-V system control register */
|
|
set_csr(0x811, 0x1);
|
|
/* select WFI or WFE command to enter deepsleep mode */
|
|
if(WFI_CMD == deepsleepmodecmd){
|
|
__WFI();
|
|
}else{
|
|
clear_csr(mstatus, MSTATUS_MIE);
|
|
set_csr(0x810, 0x1);
|
|
__WFI();
|
|
clear_csr(0x810, 0x1);
|
|
set_csr(mstatus, MSTATUS_MIE);
|
|
}
|
|
/* reset sleepdeep bit of RISC-V system control register */
|
|
clear_csr(0x811, 0x1);
|
|
}
|
|
|
|
/*!
|
|
\brief pmu work at standby mode
|
|
\param[in] standbymodecmd:
|
|
only one parameter can be selected which is shown as below:
|
|
\arg WFI_CMD: use WFI command
|
|
\arg WFE_CMD: use WFE command
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_to_standbymode(uint8_t standbymodecmd)
|
|
{
|
|
/* set CSR_SLEEPVALUE bit of RISC-V system control register */
|
|
set_csr(0x811, 0x1);
|
|
|
|
/* set stbmod bit */
|
|
PMU_CTL |= PMU_CTL_STBMOD;
|
|
|
|
/* reset wakeup flag */
|
|
PMU_CTL |= PMU_CTL_WURST;
|
|
|
|
/* select WFI or WFE command to enter standby mode */
|
|
if(WFI_CMD == standbymodecmd){
|
|
__WFI();
|
|
}else{
|
|
clear_csr(mstatus, MSTATUS_MIE);
|
|
set_csr(0x810, 0x1);
|
|
__WFI();
|
|
clear_csr(0x810, 0x1);
|
|
set_csr(mstatus, MSTATUS_MIE);
|
|
}
|
|
clear_csr(0x811, 0x1);
|
|
}
|
|
|
|
/*!
|
|
\brief enable wakeup pin
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_wakeup_pin_enable(void)
|
|
{
|
|
PMU_CS |= PMU_CS_WUPEN;
|
|
}
|
|
|
|
/*!
|
|
\brief disable wakeup pin
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_wakeup_pin_disable(void)
|
|
{
|
|
PMU_CS &= ~PMU_CS_WUPEN;
|
|
}
|
|
|
|
/*!
|
|
\brief enable write access to the registers in backup domain
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_backup_write_enable(void)
|
|
{
|
|
PMU_CTL |= PMU_CTL_BKPWEN;
|
|
}
|
|
|
|
/*!
|
|
\brief disable write access to the registers in backup domain
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_backup_write_disable(void)
|
|
{
|
|
PMU_CTL &= ~PMU_CTL_BKPWEN;
|
|
}
|
|
|
|
/*!
|
|
\brief get flag state
|
|
\param[in] flag:
|
|
only one parameter can be selected which is shown as below:
|
|
\arg PMU_FLAG_WAKEUP: wakeup flag
|
|
\arg PMU_FLAG_STANDBY: standby flag
|
|
\arg PMU_FLAG_LVD: lvd flag
|
|
\param[out] none
|
|
\retval FlagStatus SET or RESET
|
|
*/
|
|
FlagStatus pmu_flag_get(uint32_t flag)
|
|
{
|
|
if(PMU_CS & flag){
|
|
return SET;
|
|
}else{
|
|
return RESET;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief clear flag bit
|
|
\param[in] flag_reset:
|
|
only one parameter can be selected which is shown as below:
|
|
\arg PMU_FLAG_RESET_WAKEUP: reset wakeup flag
|
|
\arg PMU_FLAG_RESET_STANDBY: reset standby flag
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void pmu_flag_clear(uint32_t flag_reset)
|
|
{
|
|
switch(flag_reset){
|
|
case PMU_FLAG_RESET_WAKEUP:
|
|
/* reset wakeup flag */
|
|
PMU_CTL |= PMU_CTL_WURST;
|
|
break;
|
|
case PMU_FLAG_RESET_STANDBY:
|
|
/* reset standby flag */
|
|
PMU_CTL |= PMU_CTL_STBRST;
|
|
break;
|
|
default :
|
|
break;
|
|
}
|
|
}
|