You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

118 lines
4.7 KiB

/*!
\file msc_scsi.h
\brief definitions for the USB MSC SCSI commands
\version 2019-06-05, V1.0.0, firmware for GD32VF103
*/
/*
Copyright (c) 2019, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef __MSC_SCSI_H
#define __MSC_SCSI_H
#include "usb_ch9_std.h"
/* SCSI commands */
#define SCSI_FORMAT_UNIT 0x04U
#define SCSI_INQUIRY 0x12U
#define SCSI_MODE_SELECT6 0x15U
#define SCSI_MODE_SELECT10 0x55U
#define SCSI_MODE_SENSE6 0x1AU
#define SCSI_READ_TOC_DATA 0x43U
#define SCSI_MODE_SENSE10 0x5AU
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1EU
#define SCSI_READ6 0x08U
#define SCSI_READ10 0x28U
#define SCSI_READ12 0xA8U
#define SCSI_READ16 0x88U
#define SCSI_READ_CAPACITY10 0x25U
#define SCSI_READ_CAPACITY16 0x9EU
#define SCSI_REQUEST_SENSE 0x03U
#define SCSI_START_STOP_UNIT 0x1BU
#define SCSI_TEST_UNIT_READY 0x00U
#define SCSI_WRITE6 0x0AU
#define SCSI_WRITE10 0x2AU
#define SCSI_WRITE12 0xAAU
#define SCSI_WRITE16 0x8AU
#define SCSI_VERIFY10 0x2FU
#define SCSI_VERIFY12 0xAFU
#define SCSI_VERIFY16 0x8FU
#define SCSI_SEND_DIAGNOSTIC 0x1DU
#define SCSI_READ_FORMAT_CAPACITIES 0x23U
#define INVALID_CDB 0x20U
#define INVALID_FIELED_IN_COMMAND 0x24U
#define PARAMETER_LIST_LENGTH_ERROR 0x1AU
#define INVALID_FIELD_IN_PARAMETER_LIST 0x26U
#define ADDRESS_OUT_OF_RANGE 0x21U
#define MEDIUM_NOT_PRESENT 0x3AU
#define MEDIUM_HAVE_CHANGED 0x28U
#define WRITE_PROTECTED 0x27U
#define UNRECOVERED_READ_ERROR 0x11U
#define WRITE_FAULT 0x03U
#define READ_FORMAT_CAPACITY_DATA_LEN 0x0CU
#define READ_CAPACITY10_DATA_LEN 0x08U
#define MODE_SENSE10_DATA_LEN 0x08U
#define MODE_SENSE6_DATA_LEN 0x04U
#define READ_TOC_CMD_LEN 0x14U
#define REQUEST_SENSE_DATA_LEN 0x12U
#define STANDARD_INQUIRY_DATA_LEN 0x24U
#define BLKVFY 0x04U
enum sense_state {
NO_SENSE = 0U,
RECOVERED_ERROR,
NOT_READY,
MEDIUM_ERROR,
HARDWARE_ERROR,
ILLEGAL_REQUEST,
UNIT_ATTENTION,
DATA_PROTECT,
BLANK_CHECK,
VENDOR_SPECIFIC,
COPY_ABORTED,
ABORTED_COMMAND,
RESERVED,
VOLUME_OVERFLOW,
MISCOMPARE
};
typedef struct {
uint8_t SenseKey;
uint32_t Information;
uint8_t ASC;
uint8_t ASCQ;
} msc_scsi_sense;
#endif /* __MSC_SCSI_H */