forksand
/
usb-firewall-firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '2e8b5aa51c'
${ noResults }
usb-firewall-firmware/RISC-V/Firmware/GD32VF103_standard_peripheral/Source/gd32vf103_fmc.c

652 lines
19 KiB
Raw Blame History

/*!
\file gd32vf103_fmc.c
\brief FMC driver
\version 2019-06-05, V1.0.0, firmware for GD32VF103
\version 2019-09-18, V1.0.1, firmware for GD32VF103
*/
/*
Copyright (c) 2019, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32vf103_fmc.h"
/*!
\brief set the FMC wait state counter
\param[in] wscnt£ºwait state counter value
\arg WS_WSCNT_0: FMC 0 wait state
\arg WS_WSCNT_1: FMC 1 wait state
\arg WS_WSCNT_2: FMC 2 wait state
\param[out] none
\retval none
*/
void fmc_wscnt_set(uint32_t wscnt)
{
uint32_t reg;
reg = FMC_WS;
/* set the wait state counter value */
reg &= ~FMC_WS_WSCNT;
FMC_WS = (reg | wscnt);
}
/*!
\brief unlock the main FMC operation
\param[in] none
\param[out] none
\retval none
*/
void fmc_unlock(void)
{
if((RESET != (FMC_CTL & FMC_CTL_LK))){
/* write the FMC unlock key */
FMC_KEY = UNLOCK_KEY0;
FMC_KEY = UNLOCK_KEY1;
}
}
/*!
\brief lock the main FMC operation
\param[in] none
\param[out] none
\retval none
*/
void fmc_lock(void)
{
/* set the LK bit */
FMC_CTL |= FMC_CTL_LK;
}
/*!
\brief FMC erase page
\param[in] page_address: the page address to be erased.
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum fmc_page_erase(uint32_t page_address)
{
fmc_state_enum fmc_state;
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
/* if the last operation is completed, start page erase */
if (FMC_READY == fmc_state) {
FMC_CTL |= FMC_CTL_PER;
FMC_ADDR = page_address;
FMC_CTL |= FMC_CTL_START;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
/* reset the PER bit */
FMC_CTL &= ~FMC_CTL_PER;
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief FMC erase whole chip
\param[in] none
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum fmc_mass_erase(void)
{
fmc_state_enum fmc_state;
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
/* start whole chip erase */
FMC_CTL |= FMC_CTL_MER;
FMC_CTL |= FMC_CTL_START;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
/* reset the MER bit */
FMC_CTL &= ~FMC_CTL_MER;
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief FMC program a word at the corresponding address
\param[in] address: address to program
\param[in] data: word to program
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum fmc_word_program(uint32_t address, uint32_t data)
{
fmc_state_enum fmc_state = FMC_READY;
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
/* set the PG bit to start program */
FMC_CTL |= FMC_CTL_PG;
REG32(address) = data;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
/* reset the PG bit */
FMC_CTL &= ~FMC_CTL_PG;
}
/* return the FMC state */
return fmc_state;
}
/*
\brief FMC program a half word at the corresponding address
\param[in] address: address to program
\param[in] data: halfword to program
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum fmc_halfword_program(uint32_t address, uint16_t data)
{
fmc_state_enum fmc_state = FMC_READY;
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
/* set the PG bit to start program */
FMC_CTL |= FMC_CTL_PG;
REG16(address) = data;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
/* reset the PG bit */
FMC_CTL &= ~FMC_CTL_PG;
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief unlock the option byte operation
\param[in] none
\param[out] none
\retval none
*/
void ob_unlock(void)
{
if(RESET == (FMC_CTL & FMC_CTL_OBWEN)){
/* write the FMC key */
FMC_OBKEY = UNLOCK_KEY0;
FMC_OBKEY = UNLOCK_KEY1;
}
/* wait until OBWEN bit is set by hardware */
while (RESET == (FMC_CTL & FMC_CTL_OBWEN)){
}
}
/*!
\brief lock the option byte operation
\param[in] none
\param[out] none
\retval none
*/
void ob_lock(void)
{
/* reset the OBWEN bit */
FMC_CTL &= ~FMC_CTL_OBWEN;
}
/*!
\brief erase the FMC option byte
unlock the FMC_CTL and option byte before calling this function
\param[in] none
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum ob_erase(void)
{
uint16_t temp_spc = FMC_NSPC;
fmc_state_enum fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
/* check the option byte security protection value */
if(RESET != ob_spc_get()){
temp_spc = FMC_USPC;
}
if(FMC_READY == fmc_state){
/* start erase the option byte */
FMC_CTL |= FMC_CTL_OBER;
FMC_CTL |= FMC_CTL_START;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
/* reset the OBER bit */
FMC_CTL &= ~FMC_CTL_OBER;
/* set the OBPG bit */
FMC_CTL |= FMC_CTL_OBPG;
/* no security protection */
OB_SPC = (uint16_t) temp_spc;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if (FMC_TOERR != fmc_state) {
/* reset the OBPG bit */
FMC_CTL &= ~FMC_CTL_OBPG;
}
}else{
if(FMC_TOERR != fmc_state){
/* reset the OBPG bit */
FMC_CTL &= ~FMC_CTL_OBPG;
}
}
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief enable write protection
\param[in] ob_wp: specify sector to be write protected, set the bit to 1 if
you want to protect the corresponding pages. meanwhile, sector
macro could used to set specific sector write protected.
one or more parameters can be selected which are shown as below:
\arg OB_WP_x(x = 0..31): write protect specify sector
\arg OB_WP_ALL: write protect all sector
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum ob_write_protection_enable(uint32_t ob_wp)
{
uint16_t temp_wp0, temp_wp1, temp_wp2, temp_wp3;
fmc_state_enum fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
ob_wp = (uint32_t) (~ob_wp);
temp_wp0 = (uint16_t) (ob_wp & OB_WP0_WP0);
temp_wp1 = (uint16_t) ((ob_wp & OB_WP1_WP1) >> 8U);
temp_wp2 = (uint16_t) ((ob_wp & OB_WP2_WP2) >> 16U);
temp_wp3 = (uint16_t) ((ob_wp & OB_WP3_WP3) >> 24U);
if(FMC_READY == fmc_state){
/* set the OBPG bit*/
FMC_CTL |= FMC_CTL_OBPG;
if(0xFFU != temp_wp0){
OB_WP0 = temp_wp0;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
}
if((FMC_READY == fmc_state) && (0xFFU != temp_wp1)){
OB_WP1 = temp_wp1;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
}
if((FMC_READY == fmc_state) && (0xFFU != temp_wp2)){
OB_WP2 = temp_wp2;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
}
if((FMC_READY == fmc_state) && (0xFFU != temp_wp3)){
OB_WP3 = temp_wp3;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
}
if(FMC_TOERR != fmc_state){
/* reset the OBPG bit */
FMC_CTL &= ~FMC_CTL_OBPG;
}
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief configure security protection
\param[in] ob_spc: specify security protection
only one parameter can be selected which is shown as below:
\arg FMC_NSPC: no security protection
\arg FMC_USPC: under security protection
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum ob_security_protection_config(uint8_t ob_spc)
{
fmc_state_enum fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
FMC_CTL |= FMC_CTL_OBER;
FMC_CTL |= FMC_CTL_START;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
/* reset the OBER bit */
FMC_CTL &= ~FMC_CTL_OBER;
/* start the option byte program */
FMC_CTL |= FMC_CTL_OBPG;
OB_SPC = (uint16_t) ob_spc;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if (FMC_TOERR != fmc_state) {
/* reset the OBPG bit */
FMC_CTL &= ~FMC_CTL_OBPG;
}
}else{
if (FMC_TOERR != fmc_state) {
/* reset the OBER bit */
FMC_CTL &= ~FMC_CTL_OBER;
}
}
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief program the FMC user option byte
\param[in] ob_fwdgt: option byte watchdog value
\arg OB_FWDGT_SW: software free watchdog
\arg OB_FWDGT_HW: hardware free watchdog
\param[in] ob_deepsleep: option byte deepsleep reset value
\arg OB_DEEPSLEEP_NRST: no reset when entering deepsleep mode
\arg OB_DEEPSLEEP_RST: generate a reset instead of entering deepsleep mode
\param[in] ob_stdby:option byte standby reset value
\arg OB_STDBY_NRST: no reset when entering standby mode
\arg OB_STDBY_RST: generate a reset instead of entering standby mode
\param[in] ob_boot: specifies the option byte boot bank value
\arg OB_BOOT_B0: boot from bank0
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum ob_user_write(uint8_t ob_fwdgt, uint8_t ob_deepsleep, uint8_t ob_stdby, uint8_t ob_boot)
{
fmc_state_enum fmc_state = FMC_READY;
uint8_t temp;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
/* set the OBPG bit*/
FMC_CTL |= FMC_CTL_OBPG;
temp = ((uint8_t)((uint8_t)((uint8_t)(ob_boot | ob_fwdgt) | ob_deepsleep) | ob_stdby) | OB_USER_MASK);
OB_USER = (uint16_t) temp;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_TOERR != fmc_state){
/* reset the OBPG bit */
FMC_CTL &= ~FMC_CTL_OBPG;
}
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief program the FMC data option byte
\param[in] address: the option bytes address to be programmed
\param[in] data: the byte to be programmed
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum ob_data_program(uint32_t address, uint8_t data)
{
fmc_state_enum fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_READY == fmc_state){
/* set the OBPG bit */
FMC_CTL |= FMC_CTL_OBPG;
REG16(address) = data;
/* wait for the FMC ready */
fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
if(FMC_TOERR != fmc_state){
/* reset the OBPG bit */
FMC_CTL &= ~FMC_CTL_OBPG;
}
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief get OB_USER in register FMC_OBSTAT
\param[in] none
\param[out] none
\retval the FMC user option byte values
*/
uint8_t ob_user_get(void)
{
/* return the FMC user option byte value */
return (uint8_t) (FMC_OBSTAT >> 2U);
}
/*!
\brief get OB_DATA in register FMC_OBSTAT
\param[in] none
\param[out] none
\retval ob_data
*/
uint16_t ob_data_get(void)
{
return (uint16_t) (FMC_OBSTAT >> 10U);
}
/*!
\brief get the FMC option byte write protection
\param[in] none
\param[out] none
\retval the FMC write protection option byte value
*/
uint32_t ob_write_protection_get(void)
{
/* return the FMC write protection option byte value */
return FMC_WP;
}
/*!
\brief get FMC option byte security protection state
\param[in] none
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus ob_spc_get(void)
{
FlagStatus spc_state = RESET;
if(RESET != (FMC_OBSTAT & FMC_OBSTAT_SPC)){
spc_state = SET;
}else{
spc_state = RESET;
}
return spc_state;
}
/*!
\brief enable FMC interrupt
\param[in] interrupt: the FMC interrupt source
only one parameter can be selected which is shown as below:
\arg FMC_INT_END: enable FMC end of program interrupt
\arg FMC_INT_ERR: enable FMC error interrupt
\param[out] none
\retval none
*/
void fmc_interrupt_enable(uint32_t interrupt)
{
FMC_REG_VAL(interrupt) |= BIT(FMC_BIT_POS(interrupt));
}
/*!
\brief disable FMC interrupt
\param[in] interrupt: the FMC interrupt source
only one parameter can be selected which is shown as below:
\arg FMC_INT_END: enable FMC end of program interrupt
\arg FMC_INT_ERR: enable FMC error interrupt
\param[out] none
\retval none
*/
void fmc_interrupt_disable(uint32_t interrupt)
{
FMC_REG_VAL(interrupt) &= ~BIT(FMC_BIT_POS(interrupt));
}
/*!
\brief check flag is set or not
\param[in] flag: check FMC flag
only one parameter can be selected which is shown as below:
\arg FMC_FLAG_BUSY: FMC busy flag bit
\arg FMC_FLAG_PGERR: FMC operation error flag bit
\arg FMC_FLAG_WPERR: FMC erase/program protection error flag bit
\arg FMC_FLAG_END: FMC end of operation flag bit
\arg FMC_FLAG_OBERR: FMC option byte read error flag bit
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus fmc_flag_get(uint32_t flag)
{
if(RESET != (FMC_REG_VAL(flag) & BIT(FMC_BIT_POS(flag)))){
return SET;
} else {
return RESET;
}
}
/*!
\brief clear the FMC flag
\param[in] flag: clear FMC flag
only one parameter can be selected which is shown as below:
\arg FMC_FLAG_PGERR: FMC operation error flag bit
\arg FMC_FLAG_WPERR: FMC erase/program protection error flag bit
\arg FMC_FLAG_END: FMC end of operation flag bit
\param[out] none
\retval none
*/
void fmc_flag_clear(uint32_t flag)
{
FMC_REG_VAL(flag) = (!FMC_REG_VAL(flag)) | BIT(FMC_BIT_POS(flag));
}
/*!
\brief get FMC interrupt flag state
\param[in] flag: FMC interrupt flags, refer to fmc_interrupt_flag_enum
only one parameter can be selected which is shown as below:
\arg FMC_INT_FLAG_PGERR: FMC operation error interrupt flag bit
\arg FMC_INT_FLAG_WPERR: FMC erase/program protection error interrupt flag bit
\arg FMC_INT_FLAG_END: FMC end of operation interrupt flag bit
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus fmc_interrupt_flag_get(fmc_interrupt_flag_enum flag)
{
FlagStatus ret1 = RESET;
FlagStatus ret2 = RESET;
if(FMC_STAT_REG_OFFSET == FMC_REG_OFFSET_GET(flag)){
/* get the staus of interrupt flag */
ret1 = (FlagStatus) (FMC_REG_VALS(flag) & BIT(FMC_BIT_POS0(flag)));
/* get the staus of interrupt enale bit */
ret2 = (FlagStatus) (FMC_CTL & BIT(FMC_BIT_POS1(flag)));
}
if(ret1 && ret2){
return SET;
}else{
return RESET;
}
}
/*!
\brief clear FMC interrupt flag state
\param[in] flag: FMC interrupt flags, refer to can_interrupt_flag_enum
only one parameter can be selected which is shown as below:
\arg FMC_INT_FLAG_PGERR: FMC operation error interrupt flag bit
\arg FMC_INT_FLAG_WPERR: FMC erase/program protection error interrupt flag bit
\arg FMC_INT_FLAG_END: FMC end of operation interrupt flag bit
\param[out] none
\retval none
*/
void fmc_interrupt_flag_clear(fmc_interrupt_flag_enum flag)
{
FMC_REG_VALS(flag) |= BIT(FMC_BIT_POS0(flag));
}
/*!
\brief get the FMC state
\param[in] none
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum fmc_state_get(void)
{
fmc_state_enum fmc_state = FMC_READY;
if((uint32_t) 0x00U != (FMC_STAT & FMC_STAT_BUSY)){
fmc_state = FMC_BUSY;
}else{
if((uint32_t) 0x00U != (FMC_STAT & FMC_STAT_WPERR)){
fmc_state = FMC_WPERR;
}else{
if((uint32_t) 0x00U != (FMC_STAT & (FMC_STAT_PGERR))){
fmc_state = FMC_PGERR;
}
}
}
/* return the FMC state */
return fmc_state;
}
/*!
\brief check whether FMC is ready or not
\param[in] timeout: count of loop
\param[out] none
\retval state of FMC, refer to fmc_state_enum
*/
fmc_state_enum fmc_ready_wait(uint32_t timeout)
{
fmc_state_enum fmc_state = FMC_BUSY;
/* wait for FMC ready */
do{
/* get FMC state */
fmc_state = fmc_state_get();
timeout--;
}while((FMC_BUSY == fmc_state) && (0x00U != timeout));
if(FMC_BUSY == fmc_state){
fmc_state = FMC_TOERR;
}
/* return the FMC state */
return fmc_state;
}
Reference in new issue View Git Blame Copy Permalink