You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
344 lines
21 KiB
344 lines
21 KiB
/*!
|
|
\file gd32vf103_i2c.h
|
|
\brief definitions for the I2C
|
|
|
|
\version 2019-06-05, V1.0.1, firmware for GD32VF103
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef GD32VF103_I2C_H
|
|
#define GD32VF103_I2C_H
|
|
|
|
#include "gd32vf103.h"
|
|
|
|
/* I2Cx(x=0,1) definitions */
|
|
#define I2C0 I2C_BASE /*!< I2C0 base address */
|
|
#define I2C1 (I2C_BASE + 0x00000400U) /*!< I2C1 base address */
|
|
|
|
/* registers definitions */
|
|
#define I2C_CTL0(i2cx) REG32((i2cx) + 0x00U) /*!< I2C control register 0 */
|
|
#define I2C_CTL1(i2cx) REG32((i2cx) + 0x04U) /*!< I2C control register 1 */
|
|
#define I2C_SADDR0(i2cx) REG32((i2cx) + 0x08U) /*!< I2C slave address register 0*/
|
|
#define I2C_SADDR1(i2cx) REG32((i2cx) + 0x0CU) /*!< I2C slave address register */
|
|
#define I2C_DATA(i2cx) REG32((i2cx) + 0x10U) /*!< I2C transfer buffer register */
|
|
#define I2C_STAT0(i2cx) REG32((i2cx) + 0x14U) /*!< I2C transfer status register 0 */
|
|
#define I2C_STAT1(i2cx) REG32((i2cx) + 0x18U) /*!< I2C transfer status register */
|
|
#define I2C_CKCFG(i2cx) REG32((i2cx) + 0x1CU) /*!< I2C clock configure register */
|
|
#define I2C_RT(i2cx) REG32((i2cx) + 0x20U) /*!< I2C rise time register */
|
|
#define I2C_FMPCFG(i2cx) REG32((i2cx) + 0x90U) /*!< I2C fast-mode-plus configure register */
|
|
/* bits definitions */
|
|
/* I2Cx_CTL0 */
|
|
#define I2C_CTL0_I2CEN BIT(0) /*!< peripheral enable */
|
|
#define I2C_CTL0_SMBEN BIT(1) /*!< SMBus mode */
|
|
#define I2C_CTL0_SMBSEL BIT(3) /*!< SMBus type */
|
|
#define I2C_CTL0_ARPEN BIT(4) /*!< ARP enable */
|
|
#define I2C_CTL0_PECEN BIT(5) /*!< PEC enable */
|
|
#define I2C_CTL0_GCEN BIT(6) /*!< general call enable */
|
|
#define I2C_CTL0_SS BIT(7) /*!< clock stretching disable (slave mode) */
|
|
#define I2C_CTL0_START BIT(8) /*!< start generation */
|
|
#define I2C_CTL0_STOP BIT(9) /*!< stop generation */
|
|
#define I2C_CTL0_ACKEN BIT(10) /*!< acknowledge enable */
|
|
#define I2C_CTL0_POAP BIT(11) /*!< acknowledge/PEC position (for data reception) */
|
|
#define I2C_CTL0_PECTRANS BIT(12) /*!< packet error checking */
|
|
#define I2C_CTL0_SALT BIT(13) /*!< SMBus alert */
|
|
#define I2C_CTL0_SRESET BIT(15) /*!< software reset */
|
|
|
|
/* I2Cx_CTL1 */
|
|
#define I2C_CTL1_I2CCLK BITS(0,5) /*!< I2CCLK[5:0] bits (peripheral clock frequency) */
|
|
#define I2C_CTL1_ERRIE BIT(8) /*!< error interrupt enable */
|
|
#define I2C_CTL1_EVIE BIT(9) /*!< event interrupt enable */
|
|
#define I2C_CTL1_BUFIE BIT(10) /*!< buffer interrupt enable */
|
|
#define I2C_CTL1_DMAON BIT(11) /*!< DMA requests enable */
|
|
#define I2C_CTL1_DMALST BIT(12) /*!< DMA last transfer */
|
|
|
|
/* I2Cx_SADDR0 */
|
|
#define I2C_SADDR0_ADDRESS0 BIT(0) /*!< bit 0 of a 10-bit address */
|
|
#define I2C_SADDR0_ADDRESS BITS(1,7) /*!< 7-bit address or bits 7:1 of a 10-bit address */
|
|
#define I2C_SADDR0_ADDRESS_H BITS(8,9) /*!< highest two bits of a 10-bit address */
|
|
#define I2C_SADDR0_ADDFORMAT BIT(15) /*!< address mode for the I2C slave */
|
|
|
|
/* I2Cx_SADDR1 */
|
|
#define I2C_SADDR1_DUADEN BIT(0) /*!< aual-address mode switch */
|
|
#define I2C_SADDR1_ADDRESS2 BITS(1,7) /*!< second I2C address for the slave in dual-address mode */
|
|
|
|
/* I2Cx_DATA */
|
|
#define I2C_DATA_TRB BITS(0,7) /*!< 8-bit data register */
|
|
|
|
/* I2Cx_STAT0 */
|
|
#define I2C_STAT0_SBSEND BIT(0) /*!< start bit (master mode) */
|
|
#define I2C_STAT0_ADDSEND BIT(1) /*!< address sent (master mode)/matched (slave mode) */
|
|
#define I2C_STAT0_BTC BIT(2) /*!< byte transfer finished */
|
|
#define I2C_STAT0_ADD10SEND BIT(3) /*!< 10-bit header sent (master mode) */
|
|
#define I2C_STAT0_STPDET BIT(4) /*!< stop detection (slave mode) */
|
|
#define I2C_STAT0_RBNE BIT(6) /*!< data register not empty (receivers) */
|
|
#define I2C_STAT0_TBE BIT(7) /*!< data register empty (transmitters) */
|
|
#define I2C_STAT0_BERR BIT(8) /*!< bus error */
|
|
#define I2C_STAT0_LOSTARB BIT(9) /*!< arbitration lost (master mode) */
|
|
#define I2C_STAT0_AERR BIT(10) /*!< acknowledge failure */
|
|
#define I2C_STAT0_OUERR BIT(11) /*!< overrun/underrun */
|
|
#define I2C_STAT0_PECERR BIT(12) /*!< PEC error in reception */
|
|
#define I2C_STAT0_SMBTO BIT(14) /*!< timeout signal in SMBus mode */
|
|
#define I2C_STAT0_SMBALT BIT(15) /*!< SMBus alert status */
|
|
|
|
/* I2Cx_STAT1 */
|
|
#define I2C_STAT1_MASTER BIT(0) /*!< master/slave */
|
|
#define I2C_STAT1_I2CBSY BIT(1) /*!< bus busy */
|
|
#define I2C_STAT1_TR BIT(2) /*!< transmitter/receiver */
|
|
#define I2C_STAT1_RXGC BIT(4) /*!< general call address (slave mode) */
|
|
#define I2C_STAT1_DEFSMB BIT(5) /*!< SMBus device default address (slave mode) */
|
|
#define I2C_STAT1_HSTSMB BIT(6) /*!< SMBus host header (slave mode) */
|
|
#define I2C_STAT1_DUMODF BIT(7) /*!< dual flag (slave mode) */
|
|
#define I2C_STAT1_PECV BITS(8,15) /*!< packet error checking value */
|
|
|
|
/* I2Cx_CKCFG */
|
|
#define I2C_CKCFG_CLKC BITS(0,11) /*!< clock control register in fast/standard mode (master mode) */
|
|
#define I2C_CKCFG_DTCY BIT(14) /*!< fast mode duty cycle */
|
|
#define I2C_CKCFG_FAST BIT(15) /*!< I2C speed selection in master mode */
|
|
|
|
/* I2Cx_RT */
|
|
#define I2C_RT_RISETIME BITS(0,5) /*!< maximum rise time in fast/standard mode (Master mode) */
|
|
|
|
/* I2Cx_FMPCFG */
|
|
#define I2C_FMPCFG_FMPEN BIT(0) /*!< fast mode plus enable bit */
|
|
|
|
/* constants definitions */
|
|
/* define the I2C bit position and its register index offset */
|
|
#define I2C_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos))
|
|
#define I2C_REG_VAL(i2cx, offset) (REG32((i2cx) + (((uint32_t)(offset) & 0xFFFFU) >> 6)))
|
|
#define I2C_BIT_POS(val) ((uint32_t)(val) & 0x1FU)
|
|
#define I2C_REGIDX_BIT2(regidx, bitpos, regidx2, bitpos2) (((uint32_t)(regidx2) << 22) | (uint32_t)((bitpos2) << 16)\
|
|
| (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)))
|
|
#define I2C_REG_VAL2(i2cx, offset) (REG32((i2cx) + ((uint32_t)(offset) >> 22)))
|
|
#define I2C_BIT_POS2(val) (((uint32_t)(val) & 0x1F0000U) >> 16)
|
|
|
|
/* register offset */
|
|
#define I2C_CTL1_REG_OFFSET 0x04U /*!< CTL1 register offset */
|
|
#define I2C_STAT0_REG_OFFSET 0x14U /*!< STAT0 register offset */
|
|
#define I2C_STAT1_REG_OFFSET 0x18U /*!< STAT1 register offset */
|
|
|
|
/* I2C flags */
|
|
typedef enum {
|
|
/* flags in STAT0 register */
|
|
I2C_FLAG_SBSEND = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 0U), /*!< start condition sent out in master mode */
|
|
I2C_FLAG_ADDSEND = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 1U), /*!< address is sent in master mode or received and matches in slave mode */
|
|
I2C_FLAG_BTC = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 2U), /*!< byte transmission finishes */
|
|
I2C_FLAG_ADD10SEND = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 3U), /*!< header of 10-bit address is sent in master mode */
|
|
I2C_FLAG_STPDET = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 4U), /*!< stop condition detected in slave mode */
|
|
I2C_FLAG_RBNE = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 6U), /*!< I2C_DATA is not Empty during receiving */
|
|
I2C_FLAG_TBE = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 7U), /*!< I2C_DATA is empty during transmitting */
|
|
I2C_FLAG_BERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 8U), /*!< a bus error occurs indication a unexpected start or stop condition on I2C bus */
|
|
I2C_FLAG_LOSTARB = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 9U), /*!< arbitration lost in master mode */
|
|
I2C_FLAG_AERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 10U), /*!< acknowledge error */
|
|
I2C_FLAG_OUERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 11U), /*!< over-run or under-run situation occurs in slave mode */
|
|
I2C_FLAG_PECERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 12U), /*!< PEC error when receiving data */
|
|
I2C_FLAG_SMBTO = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 14U), /*!< timeout signal in SMBus mode */
|
|
I2C_FLAG_SMBALT = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 15U), /*!< SMBus alert status */
|
|
/* flags in STAT1 register */
|
|
I2C_FLAG_MASTER = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 0U), /*!< a flag indicating whether I2C block is in master or slave mode */
|
|
I2C_FLAG_I2CBSY = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 1U), /*!< busy flag */
|
|
I2C_FLAG_TR = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 2U), /*!< whether the I2C is a transmitter or a receiver */
|
|
I2C_FLAG_RXGC = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 4U), /*!< general call address (00h) received */
|
|
I2C_FLAG_DEFSMB = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 5U), /*!< default address of SMBus device */
|
|
I2C_FLAG_HSTSMB = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 6U), /*!< SMBus host header detected in slave mode */
|
|
I2C_FLAG_DUMODF = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 7U), /*!< dual flag in slave mode indicating which address is matched in dual-address mode */
|
|
} i2c_flag_enum;
|
|
|
|
/* I2C interrupt flags */
|
|
typedef enum {
|
|
/* interrupt flags in CTL1 register */
|
|
I2C_INT_FLAG_SBSEND = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U,I2C_STAT0_REG_OFFSET, 0U), /*!< start condition sent out in master mode interrupt flag */
|
|
I2C_INT_FLAG_ADDSEND = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U,I2C_STAT0_REG_OFFSET, 1U), /*!< address is sent in master mode or received and matches in slave mode interrupt flag */
|
|
I2C_INT_FLAG_BTC = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U,I2C_STAT0_REG_OFFSET, 2U), /*!< byte transmission finishes */
|
|
I2C_INT_FLAG_ADD10SEND = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U,I2C_STAT0_REG_OFFSET, 3U), /*!< header of 10-bit address is sent in master mode interrupt flag */
|
|
I2C_INT_FLAG_STPDET = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U,I2C_STAT0_REG_OFFSET, 4U), /*!< stop condition detected in slave mode interrupt flag */
|
|
I2C_INT_FLAG_RBNE = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U,I2C_STAT0_REG_OFFSET, 6U), /*!< I2C_DATA is not Empty during receiving interrupt flag */
|
|
I2C_INT_FLAG_TBE = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U,I2C_STAT0_REG_OFFSET, 7U), /*!< I2C_DATA is empty during transmitting interrupt flag */
|
|
I2C_INT_FLAG_BERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U,I2C_STAT0_REG_OFFSET, 8U), /*!< a bus error occurs indication a unexpected start or stop condition on I2C bus interrupt flag */
|
|
I2C_INT_FLAG_LOSTARB = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U,I2C_STAT0_REG_OFFSET, 9U), /*!< arbitration lost in master mode interrupt flag */
|
|
I2C_INT_FLAG_AERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U,I2C_STAT0_REG_OFFSET, 10U), /*!< acknowledge error interrupt flag */
|
|
I2C_INT_FLAG_OUERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U,I2C_STAT0_REG_OFFSET, 11U), /*!< over-run or under-run situation occurs in slave mode interrupt flag */
|
|
I2C_INT_FLAG_PECERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U,I2C_STAT0_REG_OFFSET, 12U), /*!< PEC error when receiving data interrupt flag */
|
|
I2C_INT_FLAG_SMBTO = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U,I2C_STAT0_REG_OFFSET, 14U), /*!< timeout signal in SMBus mode interrupt flag */
|
|
I2C_INT_FLAG_SMBALT = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U,I2C_STAT0_REG_OFFSET, 15U), /*!< SMBus Alert status interrupt flag */
|
|
} i2c_interrupt_flag_enum;
|
|
|
|
/* I2C interrupt enable or disable */
|
|
typedef enum {
|
|
/* interrupt in CTL1 register */
|
|
I2C_INT_ERR = I2C_REGIDX_BIT(I2C_CTL1_REG_OFFSET, 8U), /*!< error interrupt enable */
|
|
I2C_INT_EV = I2C_REGIDX_BIT(I2C_CTL1_REG_OFFSET, 9U), /*!< event interrupt enable */
|
|
I2C_INT_BUF = I2C_REGIDX_BIT(I2C_CTL1_REG_OFFSET, 10U), /*!< buffer interrupt enable */
|
|
} i2c_interrupt_enum;
|
|
|
|
/* SMBus/I2C mode switch and SMBus type selection */
|
|
#define I2C_I2CMODE_ENABLE ((uint32_t)0x00000000U) /*!< I2C mode */
|
|
#define I2C_SMBUSMODE_ENABLE I2C_CTL0_SMBEN /*!< SMBus mode */
|
|
|
|
/* SMBus/I2C mode switch and SMBus type selection */
|
|
#define I2C_SMBUS_DEVICE ((uint32_t)0x00000000U) /*!< SMBus mode device type */
|
|
#define I2C_SMBUS_HOST I2C_CTL0_SMBSEL /*!< SMBus mode host type */
|
|
|
|
/* I2C transfer direction */
|
|
#define I2C_RECEIVER ((uint32_t)0x00000001U) /*!< receiver */
|
|
#define I2C_TRANSMITTER ((uint32_t)0xFFFFFFFEU) /*!< transmitter */
|
|
|
|
/* whether or not to send an ACK */
|
|
#define I2C_ACK_DISABLE ((uint32_t)0x00000000U) /*!< ACK will be not sent */
|
|
#define I2C_ACK_ENABLE ((uint32_t)0x00000001U) /*!< ACK will be sent */
|
|
|
|
/* I2C POAP position*/
|
|
#define I2C_ACKPOS_NEXT ((uint32_t)0x00000000U) /*!< ACKEN bit decides whether or not to send ACK for the next byte */
|
|
#define I2C_ACKPOS_CURRENT ((uint32_t)0x00000001U) /*!< ACKEN bit decides whether or not to send ACK or not for the current byte */
|
|
|
|
/* I2C dual-address mode switch */
|
|
#define I2C_DUADEN_DISABLE ((uint32_t)0x00000000U) /*!< dual-address mode disabled */
|
|
#define I2C_DUADEN_ENABLE ((uint32_t)0x00000001U) /*!< dual-address mode enabled */
|
|
|
|
/* whether or not to stretch SCL low */
|
|
#define I2C_SCLSTRETCH_ENABLE ((uint32_t)0x00000000U) /*!< SCL stretching is enabled */
|
|
#define I2C_SCLSTRETCH_DISABLE I2C_CTL0_SS /*!< SCL stretching is disabled */
|
|
|
|
/* whether or not to response to a general call */
|
|
#define I2C_GCEN_ENABLE I2C_CTL0_GCEN /*!< slave will response to a general call */
|
|
#define I2C_GCEN_DISABLE ((uint32_t)0x00000000U) /*!< slave will not response to a general call */
|
|
|
|
/* software reset I2C */
|
|
#define I2C_SRESET_SET I2C_CTL0_SRESET /*!< I2C is under reset */
|
|
#define I2C_SRESET_RESET ((uint32_t)0x00000000U) /*!< I2C is not under reset */
|
|
|
|
/* I2C DMA mode configure */
|
|
/* DMA mode switch */
|
|
#define I2C_DMA_ON I2C_CTL1_DMAON /*!< DMA mode enabled */
|
|
#define I2C_DMA_OFF ((uint32_t)0x00000000U) /*!< DMA mode disabled */
|
|
|
|
/* flag indicating DMA last transfer */
|
|
#define I2C_DMALST_ON I2C_CTL1_DMALST /*!< next DMA EOT is the last transfer */
|
|
#define I2C_DMALST_OFF ((uint32_t)0x00000000U) /*!< next DMA EOT is not the last transfer */
|
|
|
|
/* I2C PEC configure */
|
|
/* PEC enable */
|
|
#define I2C_PEC_ENABLE I2C_CTL0_PECEN /*!< PEC calculation on */
|
|
#define I2C_PEC_DISABLE ((uint32_t)0x00000000U) /*!< PEC calculation off */
|
|
|
|
/* PEC transfer */
|
|
#define I2C_PECTRANS_ENABLE I2C_CTL0_PECTRANS /*!< transfer PEC */
|
|
#define I2C_PECTRANS_DISABLE ((uint32_t)0x00000000U) /*!< not transfer PEC value */
|
|
|
|
/* I2C SMBus configure */
|
|
/* issue or not alert through SMBA pin */
|
|
#define I2C_SALTSEND_ENABLE I2C_CTL0_SALT /*!< issue alert through SMBA pin */
|
|
#define I2C_SALTSEND_DISABLE ((uint32_t)0x00000000U) /*!< not issue alert through SMBA */
|
|
|
|
/* ARP protocol in SMBus switch */
|
|
#define I2C_ARP_ENABLE I2C_CTL0_ARPEN /*!< ARP enable */
|
|
#define I2C_ARP_DISABLE ((uint32_t)0x00000000U) /*!< ARP disable */
|
|
|
|
/* transmit I2C data */
|
|
#define DATA_TRANS(regval) (BITS(0,7) & ((uint32_t)(regval) << 0))
|
|
|
|
/* receive I2C data */
|
|
#define DATA_RECV(regval) GET_BITS((uint32_t)(regval), 0, 7)
|
|
|
|
/* I2C duty cycle in fast mode */
|
|
#define I2C_DTCY_2 ((uint32_t)0x00000000U) /*!< I2C fast mode Tlow/Thigh = 2 */
|
|
#define I2C_DTCY_16_9 I2C_CKCFG_DTCY /*!< I2C fast mode Tlow/Thigh = 16/9 */
|
|
|
|
/* address mode for the I2C slave */
|
|
#define I2C_ADDFORMAT_7BITS ((uint32_t)0x00000000U) /*!< address:7 bits */
|
|
#define I2C_ADDFORMAT_10BITS I2C_SADDR0_ADDFORMAT /*!< address:10 bits */
|
|
|
|
/* function declarations */
|
|
/* reset I2C */
|
|
void i2c_deinit(uint32_t i2c_periph);
|
|
/* configure I2C clock */
|
|
void i2c_clock_config(uint32_t i2c_periph, uint32_t clkspeed, uint32_t dutycyc);
|
|
/* configure I2C address */
|
|
void i2c_mode_addr_config(uint32_t i2c_periph, uint32_t mode,uint32_t addformat, uint32_t addr);
|
|
/* SMBus type selection */
|
|
void i2c_smbus_type_config(uint32_t i2c_periph, uint32_t type);
|
|
/* whether or not to send an ACK */
|
|
void i2c_ack_config(uint32_t i2c_periph, uint32_t ack);
|
|
/* configure I2C POAP position */
|
|
void i2c_ackpos_config(uint32_t i2c_periph, uint32_t pos);
|
|
/* master sends slave address */
|
|
void i2c_master_addressing(uint32_t i2c_periph, uint32_t addr,uint32_t trandirection);
|
|
/* enable dual-address mode */
|
|
void i2c_dualaddr_enable(uint32_t i2c_periph, uint32_t dualaddr);
|
|
/* disable dual-address mode */
|
|
void i2c_dualaddr_disable(uint32_t i2c_periph);
|
|
/* enable I2C */
|
|
void i2c_enable(uint32_t i2c_periph);
|
|
/* disable I2C */
|
|
void i2c_disable(uint32_t i2c_periph);
|
|
|
|
/* generate a START condition on I2C bus */
|
|
void i2c_start_on_bus(uint32_t i2c_periph);
|
|
/* generate a STOP condition on I2C bus */
|
|
void i2c_stop_on_bus(uint32_t i2c_periph);
|
|
/* I2C transmit data function */
|
|
void i2c_data_transmit(uint32_t i2c_periph, uint8_t data);
|
|
/* I2C receive data function */
|
|
uint8_t i2c_data_receive(uint32_t i2c_periph);
|
|
/* enable I2C DMA mode */
|
|
void i2c_dma_enable(uint32_t i2c_periph, uint32_t dmastate);
|
|
/* configure whether next DMA EOT is DMA last transfer or not */
|
|
void i2c_dma_last_transfer_config(uint32_t i2c_periph, uint32_t dmalast);
|
|
/* whether to stretch SCL low when data is not ready in slave mode */
|
|
void i2c_stretch_scl_low_config(uint32_t i2c_periph, uint32_t stretchpara);
|
|
/* whether or not to response to a general call */
|
|
void i2c_slave_response_to_gcall_config(uint32_t i2c_periph, uint32_t gcallpara);
|
|
/* software reset I2C */
|
|
void i2c_software_reset_config(uint32_t i2c_periph, uint32_t sreset);
|
|
|
|
/* I2C PEC calculation on or off */
|
|
void i2c_pec_enable(uint32_t i2c_periph, uint32_t pecstate);
|
|
/* I2C whether to transfer PEC value */
|
|
void i2c_pec_transfer_enable(uint32_t i2c_periph, uint32_t pecpara);
|
|
/* packet error checking value */
|
|
uint8_t i2c_pec_value_get(uint32_t i2c_periph);
|
|
/* I2C issue alert through SMBA pin */
|
|
void i2c_smbus_issue_alert(uint32_t i2c_periph, uint32_t smbuspara);
|
|
/* I2C ARP protocol in SMBus switch */
|
|
void i2c_smbus_arp_enable(uint32_t i2c_periph, uint32_t arpstate);
|
|
|
|
/* check I2C flag is set or not */
|
|
FlagStatus i2c_flag_get(uint32_t i2c_periph, i2c_flag_enum flag);
|
|
/* clear I2C flag */
|
|
void i2c_flag_clear(uint32_t i2c_periph, i2c_flag_enum flag);
|
|
/* enable I2C interrupt */
|
|
void i2c_interrupt_enable(uint32_t i2c_periph, i2c_interrupt_enum interrupt);
|
|
/* disable I2C interrupt */
|
|
void i2c_interrupt_disable(uint32_t i2c_periph, i2c_interrupt_enum interrupt);
|
|
/* check I2C interrupt flag */
|
|
FlagStatus i2c_interrupt_flag_get(uint32_t i2c_periph,i2c_interrupt_flag_enum int_flag);
|
|
/* clear I2C interrupt flag */
|
|
void i2c_interrupt_flag_clear(uint32_t i2c_periph,i2c_interrupt_flag_enum int_flag);
|
|
|
|
#endif /* GD32VF103_I2C_H */
|